Get notified when we add a new AroSpartana Manual

We cover 60 Aro vehicles, were you looking for one of these?

Skoda - Auto - skoda-karoq-2017-110444
Skoda - Auto - skoda-karoq-2017-brukerhandbok-110449
Cars & Automotive Accessories - Kenwood - C929
Toys & Accessories - Lego - DUPLO Town - AROUND THE WORLD - 10805
Skoda - Auto - skoda-karoq-2017-savininko-vadovas-110446
Skoda - Auto - skoda-karoq-2017-manual-del-propietario-110438
Skoda - Auto - skoda-karoq-2017-110460
Skoda - Auto - skoda-karoq-2017-navod-k-obsluze-110433
Skoda - Auto - skoda-karoq-2017-omistajan-kasikirja-110439
Skoda - Auto - skoda-karoq-2017-110457
VCRs & Accessories - Hitachi Electronics - VTM171A
Skoda - Auto - skoda-karoq-2017-kullan-m-k-lavuzu-110458
Skoda - Auto - skoda-karoq-2017-110431
1981-1995--Chrysler--Lebaron--4 Cylinders C 2.2L FI Turbo SOHC--31006701
1981-1995--Chrysler--Lebaron--4 Cylinders J 2.5L MFI Turbo SOHC--31034803
Skoda - Auto - skoda-karoq-2017-110441
1981-1995--Chrysler--Lebaron--4 Cylinders J 2.5L MFI Turbo SOHC--31006702
Skoda - Auto - skoda-karoq-2017-prirocnik-za-lastnika-110456
Barossa - Motorcycle - Barossa__Barossa_PYTHON_100cc_parts_5d8a7f921c3648a62136367
Pool Equipment - Haywood-Pool - Super Pump~All Super Pump Models
Skoda - Auto - skoda-karoq-2017-uzivatelska-prirucka-110455
Skoda - Auto - skoda-karoq-2017-instrukcja-obslugi-110450
Skoda - Auto - skoda-karoq-2017-110453
Skoda - Auto - skoda-karoq-2017-ipasnieka-rokasgramata-110447
Skoda - Auto - skoda-karoq-2017-omaniku-kasiraamat-110436
Barossa - Motorcycle - Barossa_PYTHON_100cc_parts
Sewing Machine - Singer - 14T968DC %7C PROFESSIONAL 5
Skoda - Auto - skoda-karoq-2017-manuale-del-proprietario-110445
Skoda - Auto - skoda-karoq-2017-manuel-du-proprietaire-110440
1981-1995--Chrysler--Lebaron--4 Cylinders D 2.2L TBI SOHC--31095601
1981-1995--Chrysler--Lebaron--4 Cylinders B 2.2L 2BL SOHC--31218101
1981-1995--Chrysler--Lebaron--4 Cylinders D 2.6L 2BL SOHC--31218102
Skoda - Auto - skoda-karoq-2017-agarmanual-110454
Skoda - Auto - skoda-karoq-2017-handleiding-110448
Skoda - Auto - skoda-karoq-2017-110459
Furniture & Storage - Blue Rhino - GAD1375SP
Skoda - Auto - skoda-karoq-2017-kezelesi-utmutato-110443
Skoda - Auto - skoda-karoq-2017-110432
Barossa - Motorcycle - Barossa__Barossa_PYTHON_100cc_parts
Skoda - Auto - skoda-karoq-2017-manualul-de-utilizare-110452
Speakers & Audio Accessories - Dual - Dual - SX652 ~ SX692
Skoda - Auto - skoda-karoq-2017-instruktionsbog-110435
Skoda - Auto - skoda-karoq-2017-vodic-za-korisnike-110442
Grills & Accessories - Blue Rhino - Blue Rhino WAD996SP
1981-1995--Chrysler--Lebaron--4 Cylinders D 2.2L TBI SOHC--31034802
Printers & Accessories - Xerox - WorkCentre Pro C2128~C2636~C3545
Cars & Automotive Accessories - Kenwood - DPX-510
Sewing Machine - Brother - Brother BAS-511
Skoda - Auto - skoda-karoq-2017-owner-s-manual-110437
Cars & Automotive Accessories - Ford - F-150 2001
Speaker Systems - JBL - Xtreme
Video Cameras, Camcorders, & Accessories - Canon - ZR900 Camcorder
Ducati - Motorcycle - Ducati_M620_ie_Parts_2002
Skoda - Auto - skoda-karoq-2017-manual-do-proprietario-110451
Cameras & Accessories - Nikon - Nikon COOLPIX S203
Printers & Accessories - Epson - Stylus Pro 9000
Sewing Machine - Brother - Brother DB2-B798
DJ Equipment - Kramer AV - VM-4HDT
Power Tools & Accessories - STIHL - STIHL Trimmer FS 40, FS 50
Printers & Accessories - Epson - WorkForce 40
Summary of Content
LMR1S LMR1S MIC/LINE IN REMOTE CONTROL 3 Mic/Line Input Module with Remote Control 2 1 Features 50 Spring Street, Ramsey, NJ 07446, U.S.A. 201-934-8500; Fax: 201-934-9832 www.bogen.com • Input level control by remote pot or direct voltage input • Line mode for high impedance input • MIC Mode for low impedance input • Electronically balanced input • Gain/Trim control with Gain range switch • Bass and treble • 24V Phantom power • Audio Gating • Gating with threshold and duration adjustments • Built-in limiter with LED activity indicator • Fade back from mute • 4 levels of available priority • Can be muted from higher priority modules • Can mute lower priority modules • Screw terminal input © 2007 Bogen Communications, Inc. 54-2158-01A 0704 Specifications subject to change without notice. 1. Gate - Threshold (Thresh) Block Diagram Controls the amount of input signal level necessary to turn the module’s signal output on and mute lower priority modules. Clockwise rotation increases the necessary input signal level required to produce audio output and mute lower priority modules. 2. Gate - Duration (Dur) Controls the amount of time the signal output and priority muting of the module remains applied to the main unit’s buses after the input signal falls below the required minimum signal level (set by the threshold control). LMR1S 1 2 3 5 6 4 MIC/LINE IN 7 REMOTE CONTROL 3 2 8 1 3. Limiter (Limit) Sets the signal level threshold at which the module will begin to limit the level of its output signal. An LED to the left of the knob illuminates when the limiter is active. Clockwise rotation of the knob will allow more output before limiting, counterclockwise rotation will allow less. The limiter monitors the module’s output signal, so increasing Gain will affect when limiting takes place. W GND Provides control over the level of input signal that can be applied to the internal signal buses of the main unit. Balances the input levels of various devices so that the main unit controls can be set to relatively uniform or optimum levels. 18-60 dB Gain range in MIC position, -2 to 40 dB in Line position. CS+ 4. Gain 5. Treble (Treb) MIC/LINE _ MIC/Line level input on screw terminal strip. Electronically balanced input. GND 7. MIC/Line In + The Bass control provides +/- 10 dB at 100 Hz. Clockwise rotation provides boost; counterclockwise rotation provides cut. Center position provides no effect. MIC/LINE INPUT 6. Bass INPUT ATTEN. The Treble control provides +/- 10 dB at 10 kHz. Clockwise rotation provides boost; counterclockwise rotation provides cut. Center position provides no effect. 8. Remote Control Input level can be controlled by direct voltage input or by remote 10K-ohm pot. 1 6 Remote Control Jumper Selections Single Conductor Shieldes Remote Connections The maximum wire run length for this configuration is 200 feet. Use one-conductor shielded wire for this configuration. LMR1S Remote Panel cs+ WIPER REMOTE CONTROL GND SHIELD 3 JUMPER FROM CS+ 2 TO WIPER TERMINAL 1 SHIELD HIGHEST 1 ENABLED Priority Level* This module can respond to 4 different levels of priority. Priority 1 is the highest priority. It mutes modules with lower priorities and is never muted. Priority 2 can be muted by Priority 1 modules and can mute modules set for Priority Level 3 or 4. Priority 3 can be muted by either Priority 1 or 2 modules and can mute Priority 4 modules. Priority 4 modules are muted by all higher priority modules. Remove all jumpers for “no mute” setting. * The number of priority levels available is determined by the equipment the modules are used in. LMR1S Remote Panel WIPER 1 SHIELD GND SHIELD J11 GATING ENABLE A B BOTH J12 J10 J4 BUS ASSIGNMENT PHANTOM PWR J2 LINE MIC MIC/LINE SWITCH LINE LEVEL INPUT MIC LEVEL INPUT PHANTOM POWER ON OFF Phantom Power 24V Phantom power can be supplied to condensor microphones when jumper is set to ON position. Leave OFF for dynamic mics. Bus Assignment This module can be set to operate so that the mono signal can be sent to the main unit’s A bus, B bus, or both buses. MIC/LINE Switch Sets input gain range for the intended input device. MIC gain range 18 – 60 dB, LINE gain range -2 – 40 dB. WARNING: Turn off power to unit and make all jumper selections before installing module in unit. SHIELD Note: If no connections are made to the remote control, the LMR1S module defaults to 0 dB of attenuation. 5 BUS ASSIGNMENT PRIORITIES WIPER 2 4 DISABLED cs+ REMOTE CONTROL cs+ LOWEST 3 Gating Gating (turning off) of the modules output when insufficient audio is present at the input can be disabled. Detection of audio for the purpose of muting lower priority modules is always active regardless of this jumper setting. Note: If no connections are made to the remote control, the LMR1S module defaults to 0 dB of attenuation. Two-Conductor Shielded Remote Connections This configuration is recommended when wire runs up to 2,000 feet are necessary. Use twoconductor shielded wire for this connection. 3 2 J13 These configurations use the included wall-mounted remote panel. Up to 2,000 feet of #24 wire can be run from the remote panel to the LMR1S. PRIORITY LEVELS G ATING 2 Module Installation Direct Voltage Control 1. Turn off all power to the unit. 2. Make all necessary jumper selections. 3. Position module in front of any desired module bay opening, making sure that the module is right-side up. 4. Slide module onto card guide rails. Make sure that both the top and bottom guides are engaged. 5. Push the module in to the bay until the faceplate contacts the unit’s chassis. 6. Use the two screws included to secure the module to the unit. Input level can be controlled by an external DC voltage source, which must be able to supply up to 1mA of current to the LMR1S. The attenuation level is linear with voltage. 4.5V or greater = 0 dB of attenuation (full volume) and 0V > 80 dB of attenuation. Distance from the source should be kept to 200 feet or less. The CS+ terminal is not used in this configuration. IMPORTANT: Maximum voltage input should be limited to +10V. VOLTAGE SOURCE Input Wiring REMOTE CONTROL Balanced Connection Note: 3 Use this wiring when the source equipment supplies a balanced, 3-wire output signal. SOURCE EQUIPMENT 2 + 0 - 5V If no connections are made to the remote control, the LMR1S module defaults to 0 dB of attenuation (full volume). MIC/LINE 1 SHIELD Connect the shield wire of the source signal to the "G" terminal of the input. If the "+" signal lead of the source can be identified, connect it to the plus "+" terminal of the input. If the source lead polarity cannot be identified, connect either of the hot leads to the plus "+" terminal. Connect the remaining lead to the minus "-" terminal of the input. Note: If polarity of the output signal versus the input signal is important, it may be necessary to reverse input lead connections. 90 Unbalanced Connection 80 70 60 Attenuation (dB) SOURCE When the source device provides only an EQUIPMENT MIC/LINE IN unbalanced output (signal and ground), the input module should be wired with the "-" input shorted to ground (G). The unbalanced signal's shield wire is conJUMPER WIRE nected to the input module’s ground and the signal hot wire is connected to the "+" terminal. Since unbalanced connections do not provide the same amount of noise immunity that a balanced connection does, the connection distances should be made as short as possible. 50 40 30 20 10 (Full Volume @ 0 dB) 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Control Voltage Input (Volts DC) 3 4 4.0 4.5 5.0 Module Installation Direct Voltage Control 1. Turn off all power to the unit. 2. Make all necessary jumper selections. 3. Position module in front of any desired module bay opening, making sure that the module is right-side up. 4. Slide module onto card guide rails. Make sure that both the top and bottom guides are engaged. 5. Push the module in to the bay until the faceplate contacts the unit’s chassis. 6. Use the two screws included to secure the module to the unit. Input level can be controlled by an external DC voltage source, which must be able to supply up to 1mA of current to the LMR1S. The attenuation level is linear with voltage. 4.5V or greater = 0 dB of attenuation (full volume) and 0V > 80 dB of attenuation. Distance from the source should be kept to 200 feet or less. The CS+ terminal is not used in this configuration. IMPORTANT: Maximum voltage input should be limited to +10V. VOLTAGE SOURCE Input Wiring REMOTE CONTROL Balanced Connection Note: 3 Use this wiring when the source equipment supplies a balanced, 3-wire output signal. SOURCE EQUIPMENT 2 + 0 - 5V If no connections are made to the remote control, the LMR1S module defaults to 0 dB of attenuation (full volume). MIC/LINE 1 SHIELD Connect the shield wire of the source signal to the "G" terminal of the input. If the "+" signal lead of the source can be identified, connect it to the plus "+" terminal of the input. If the source lead polarity cannot be identified, connect either of the hot leads to the plus "+" terminal. Connect the remaining lead to the minus "-" terminal of the input. Note: If polarity of the output signal versus the input signal is important, it may be necessary to reverse input lead connections. 90 Unbalanced Connection 80 70 60 Attenuation (dB) SOURCE When the source device provides only an EQUIPMENT MIC/LINE IN unbalanced output (signal and ground), the input module should be wired with the "-" input shorted to ground (G). The unbalanced signal's shield wire is conJUMPER WIRE nected to the input module’s ground and the signal hot wire is connected to the "+" terminal. Since unbalanced connections do not provide the same amount of noise immunity that a balanced connection does, the connection distances should be made as short as possible. 50 40 30 20 10 (Full Volume @ 0 dB) 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Control Voltage Input (Volts DC) 3 4 4.0 4.5 5.0 Remote Control Jumper Selections Single Conductor Shieldes Remote Connections The maximum wire run length for this configuration is 200 feet. Use one-conductor shielded wire for this configuration. LMR1S Remote Panel cs+ WIPER REMOTE CONTROL GND SHIELD 3 JUMPER FROM CS+ 2 TO WIPER TERMINAL 1 SHIELD HIGHEST 1 ENABLED Priority Level* This module can respond to 4 different levels of priority. Priority 1 is the highest priority. It mutes modules with lower priorities and is never muted. Priority 2 can be muted by Priority 1 modules and can mute modules set for Priority Level 3 or 4. Priority 3 can be muted by either Priority 1 or 2 modules and can mute Priority 4 modules. Priority 4 modules are muted by all higher priority modules. Remove all jumpers for “no mute” setting. * The number of priority levels available is determined by the equipment the modules are used in. LMR1S Remote Panel WIPER 1 SHIELD GND SHIELD J11 GATING ENABLE A B BOTH J12 J10 J4 BUS ASSIGNMENT PHANTOM PWR J2 LINE MIC MIC/LINE SWITCH LINE LEVEL INPUT MIC LEVEL INPUT PHANTOM POWER ON OFF Phantom Power 24V Phantom power can be supplied to condensor microphones when jumper is set to ON position. Leave OFF for dynamic mics. Bus Assignment This module can be set to operate so that the mono signal can be sent to the main unit’s A bus, B bus, or both buses. MIC/LINE Switch Sets input gain range for the intended input device. MIC gain range 18 – 60 dB, LINE gain range -2 – 40 dB. WARNING: Turn off power to unit and make all jumper selections before installing module in unit. SHIELD Note: If no connections are made to the remote control, the LMR1S module defaults to 0 dB of attenuation. 5 BUS ASSIGNMENT PRIORITIES WIPER 2 4 DISABLED cs+ REMOTE CONTROL cs+ LOWEST 3 Gating Gating (turning off) of the modules output when insufficient audio is present at the input can be disabled. Detection of audio for the purpose of muting lower priority modules is always active regardless of this jumper setting. Note: If no connections are made to the remote control, the LMR1S module defaults to 0 dB of attenuation. Two-Conductor Shielded Remote Connections This configuration is recommended when wire runs up to 2,000 feet are necessary. Use twoconductor shielded wire for this connection. 3 2 J13 These configurations use the included wall-mounted remote panel. Up to 2,000 feet of #24 wire can be run from the remote panel to the LMR1S. PRIORITY LEVELS G ATING 2 1. Gate - Threshold (Thresh) Block Diagram Controls the amount of input signal level necessary to turn the module’s signal output on and mute lower priority modules. Clockwise rotation increases the necessary input signal level required to produce audio output and mute lower priority modules. 2. Gate - Duration (Dur) Controls the amount of time the signal output and priority muting of the module remains applied to the main unit’s buses after the input signal falls below the required minimum signal level (set by the threshold control). LMR1S 1 2 3 5 6 4 MIC/LINE IN 7 REMOTE CONTROL 3 2 8 1 3. Limiter (Limit) Sets the signal level threshold at which the module will begin to limit the level of its output signal. An LED to the left of the knob illuminates when the limiter is active. Clockwise rotation of the knob will allow more output before limiting, counterclockwise rotation will allow less. The limiter monitors the module’s output signal, so increasing Gain will affect when limiting takes place. W GND Provides control over the level of input signal that can be applied to the internal signal buses of the main unit. Balances the input levels of various devices so that the main unit controls can be set to relatively uniform or optimum levels. 18-60 dB Gain range in MIC position, -2 to 40 dB in Line position. CS+ 4. Gain 5. Treble (Treb) MIC/LINE _ MIC/Line level input on screw terminal strip. Electronically balanced input. GND 7. MIC/Line In + The Bass control provides +/- 10 dB at 100 Hz. Clockwise rotation provides boost; counterclockwise rotation provides cut. Center position provides no effect. MIC/LINE INPUT 6. Bass INPUT ATTEN. The Treble control provides +/- 10 dB at 10 kHz. Clockwise rotation provides boost; counterclockwise rotation provides cut. Center position provides no effect. 8. Remote Control Input level can be controlled by direct voltage input or by remote 10K-ohm pot. 1 6 LMR1S LMR1S MIC/LINE IN REMOTE CONTROL 3 Mic/Line Input Module with Remote Control 2 1 Features 50 Spring Street, Ramsey, NJ 07446, U.S.A. 201-934-8500; Fax: 201-934-9832 www.bogen.com • Input level control by remote pot or direct voltage input • Line mode for high impedance input • MIC Mode for low impedance input • Electronically balanced input • Gain/Trim control with Gain range switch • Bass and treble • 24V Phantom power • Audio Gating • Gating with threshold and duration adjustments • Built-in limiter with LED activity indicator • Fade back from mute • 4 levels of available priority • Can be muted from higher priority modules • Can mute lower priority modules • Screw terminal input © 2007 Bogen Communications, Inc. 54-2158-01A 0704 Specifications subject to change without notice.