Ford - E Series - Parts Catalogue - 2011 - 2011

Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   1)  Using  a  plas,c  trim  panel   removal  tool,  take  out  the  audio   jack  panel  as  shown.   2)  Disconnect  the  wiring  loom  by   removing  the  plug.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   3)  Using  a  plas,c  trim  panel   removal  tool,  take  out  the  auxiliary   power  jack  panel  as  shown.   4)  Disconnect  the  wiring  loom  by   removing  the  plug.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   5)  Remove  the  two  lower  trim  panel  retaining  screws  in  the   loca,ons  shown  below.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   6)  Pull  the  lower  part  of  the   dash  panel  forward  to  release   the  lower  retaining  clips.  With  a   plas,c  trim  panel  removal  tool,   release  the  upper  clips  as   shown.   Lower  the  trim  panel  carefully.   There  should  be  no  need  to   disconnect  any  wiring   harnesses.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   7)  Remove  the  two  right   hand  screws  retaining  the   radio.   8)  Remove  the  two  leM   hand  screws  retaining  the   radio.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   9)  Carefully  pull  out  the   radio  and  remove  the   wiring  harnesses.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   10)  Remove  the  four  cap,ve  nuts  used  to  secure  the  radio  as   shown.   Note:  Only  the  two  leM  hand  nuts  are  shown  in  the  images.   The  two  on  the  right  hand  side  are  also  to  be  removed.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   11)  Reconnect  the  radio   wiring  harnesses  and  slide   the  radio  carefully  back  into   place.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   12)  Fit  the  Right  Hand  Side  Plate   032-­‐02-­‐0311  as  shown.  There  is  a   small  notch  in  the  bracket  which   must  be  towards  the  top.   13)  Fit  M6  BuZon  Head  Screw   TD504030,  Shakeproof  Washer   TD504032  and  Collar  Nut  TD504031   as  shown.     14)  Repeat  for  the  boZom  hole  and   fully  ,ghten  both  fasteners.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   15)  Fit  the  LeM  Hand  Side  Plate   032-­‐02-­‐0310  as  shown.  There  is  a   small  notch  in  the  plate  which  is   towards  the  top.   16)  Fit  the  remaining  M6  fasteners  to  the  two  holes  as   shown  and  fully  ,ghten.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   17)  Refit  the  dash  trim  panel   ensuring  that  all  of  the  retaining   clips  snap  into  place.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   18)  Refit  the  two  lower  dash  retaining  screws  removed  in   step  5  as  shown.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   19)  Reconnect  the  auxiliary  power   jack  harness  and  snap  the  module   back  into  place.   20)  Reconnect  the  audio  jack   harness  and  snap  the  module  back   into  place.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   21)  Using  plas,c  trim  panel   removal  tools,  carefully  release   the  dashboard  trim  panel  as   shown.   There  should  be  no  need  to   disconnect  any  wiring   harnesses.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   22)  Remove  the  4  radio  retaining  bolts.  Right  hand  side   bolts  pictured  below.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   23)  Using  the  bolts  removed  in  step  22,  fit  the  Right  Hand  Side   Plate  032-­‐02-­‐0311  as  shown.  There  is  a  small  notch  in  the   bracket  which  must  be  towards  the  top  as  highlighted.   24)  Using  the  bolts  removed  in  step  22,  fit  the  LeM  Hand  Side   Plate  032-­‐02-­‐0310  as  shown.  There  is  a  small  notch  in  the  plate   which  must  be  towards  the  top  as  highlighted.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   25)  Refit  the  dashboard  trim  panel  as  shown.     For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   26)  Fit  the  Front  Plate  032-­‐02-­‐0312   as  shown  using  two  M5  BuZon  head   screws  TD503712  and  two   Shakeproof  Washers  TD503481   provided.   NOTE  –  for  E   Series  it  will  be   necessary  to   remove  the   volume  knob   from  the  radio.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   27)  Fit  the  remaining  M5  fasteners   to  the  right  hand  side  as  shown.     Fully  ,ghten  all  four  screws.   For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com Ford  F  Super  Duty  and  E  Series  Installa4on   Instruc4ons   28)  Fit  the  Docking  Sta,on  /  Tilt  &  Rotate  Assembly   to  the  front  bracket  as  shown  using  the  provided  M8   fasteners.     NOTE:-­‐  It  may  be  necessary  to  temporarily  remove   the  rubber  edge  strip  to  allow  for  correct  fitment.   Ensure  that  the  loca,on  lugs  are  correctly  engaged   before  final  ,ghtening  to  prevent  unwanted   rota,on.     29)  When  installing  the  docking  sta,on  to  the  VESA   mount,  ensure  that  the  view  the  driver  has  through   the  windshield  is  not  restricted  in  any  way.   If  it  is  then  select  a  lower  set  of  holes  on  the  VESA   mount.     For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com For more information, contact your local Motion Reseller or Motion Representative. © 2011 Motion Computing, Inc. All rights reserved. Motion and Motion Computing are registered trademarks of Motion Computing, Inc . www.MotionComputing.com