Official Software
Get notified when we add a new BeijingOther Model Manual
Summary of Content
• Please read this manual and save it with your original sales receipt. • Tool needed for assembly: Phillips Screwdriver (not included). • Use only with the included Power Wheels® 12 Volt Lead-Acid Rechargeable, Battery with Built-in Thermal Fuse and a Power Wheels 12 Volt Charger with type 12V connector (both included). • Requires four "C" (LR14) alkaline batteries for FM Radio operation (not included). Owner's Manual with Assembly Instructions For Model K8285 TABLE OF CONTENTS Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Warnings and Cautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Parts Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Battery Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Decoration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Battery Care and Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Safe Driving Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Vehicle Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Charge Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 FM Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Cargo Bed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Vehicle Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Problems and Solutions Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 ICES-003. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 IMPORTANT INFORMATION • This product contains a magnet. Do not use around items that are sensitive to or affected by magnetic fields. • This vehicle has adjustable play seat belts. Please note that the adjustable seat belts are designed to be a play feature and do not function as protective safety restraints. • If you have any questions about your Power Wheels® vehicle, please call our toll-free service lines at 1-800-348-0751 from 9 AM to 7 PM (EST) Monday through Friday and 11 AM to 5 PM (EST) Saturday. Trained customer service representatives are available to take your call in English or French. Habla Español? Si usted tiene alguna pregunta ó necesita asistencia llame gratis 1-800-348-0755 para los Estados Unidos. Tenemos representantes que hablan español para atender su llamada. • For your convenience, Power Wheels® maintains an independently owned and operated Authorized Service Center Network with more than 300 authorized service centers nationwide. Our authorized service centers will repair or replace parts under warranty at no extra charge, and can perform non-warranty repairs for a minimal charge. To find the authorized service center nearest you, please visit us online at www.powerwheels.com or call 1-800-348-0751. • To register your vehicle, please visit us on-line at www.powerwheels.com. • Your new vehicle requires adult assembly. Please set aside at least 60 minutes for assembly. • You must charge your battery for 18 - 30 hours before you use your vehicle for the first time. We recommend that you start charging your battery before beginning assembly. Please see Battery Charging beginning on page 7 for detailed instructions. • Read this manual carefully for important safety information and operating instructions before using your vehicle. Keep this manual for future reference as it contains important information. • This vehicle is appropriate for use on generally level, rough terrain (including hard surfaces, wet and dry grass, ruts, gravel, mulch and mud) and by children 3 years of age and older. • This vehicle has been pre-set so it will only operate in low speed. See the instructions for High speed lockout on page 21 to remove the high speed lock-out screw. • Use this vehicle ONLY outdoors. Most interior flooring can be damaged by riding this vehicle indoors. Fisher-Price® will not be responsible for damage to the floor if the vehicle is used indoors. • To prevent damaging the motors and gears, teach your child to stop the vehicle before switching direction. Do not exceed the maximum total weight capacity of 130 lbs (59 kg) in the passenger seating area and cargo bed. Cargo bed weight limit: 25 lbs (11.3 kg). 2 2 K8285b-0920 ELECTRICAL HAZARD WARNING • Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. - Use of the wrong type battery or charger could cause a fire or explosion resulting in serious injury. - Use of Power Wheels® components in products other than Power Wheels® vehicles could cause overheating, fire or explosion. • The battery must be handled by adults only. The battery is heavy and contains sulfuric acid (electrolyte). Dropping the battery could result in serious injury. • Never allow children to charge the battery. Battery charging must be done by adults only. A child could be injured by the electricity involved in charging the battery. • Read the safety instructions on the battery. • Examine the battery, charger and their connectors for excessive wear or damage each time you charge the battery. If damage or excessive wear is detected, do not use the charger or the battery until you have replaced the worn or damaged part. • HOT motors. Handle carefully. RIDING HAZARD WARNING • Prevent Injuries and Deaths • Direct Adult Supervision Required. • Never Ride at Night. • Keep Children Within Safe Riding Areas. These areas must be: - away from swimming pools and other bodies of water to prevent drownings - generally level to prevent tipovers - away from steps, steep inclines, cars, roads and alleys. • Riding Rules Make sure children know and follow these rules for safe driving and riding. - Always sit on the seat. - Always wear shoes. - Only 2 (two) riders at a time. - Never ride in cargo bed. CAUTION • In the unassembled state, this package contains small parts. Adult assembly is required. • Use the charger in dry locations only. 3 K8285b-0920 PARTS • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. • Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any excess lubricant. Grille Support Vehicle Hood Front Grille 2 Rear Wheels Seat Cargo Bed Long Seat Belt 4 2 Short Seat Belts K8285b-0920 Steering Wheel Cover Steering Wheel Steering Column 12 Volt Charger 2 Hubcaps 12 Volt Battery Steering Column Cap Part Not Shown: Label Sheet #8 x 3/ 4" Screw - 19 .25" x 2.85" Pin - 1 Wire Clip - 2 Fasteners Shown Actual Size For your convenience, we included extra fasteners! Note: Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten the screws. 5 K8285b-0920 PARTS PICTURE Note: Some parts shown are assembled to both sides of the vehicle. 5 9 9 6 4 14 13 8 2 1 7 18 3 10 15 12 11 16 1 2 3 4 5 6 Vehicle Cargo Bed 2 Hubcaps Steering Wheel Seat Steering Wheel Cover 17 7 8 9 10 11 12 Hood Long Seat Belt 2 Short Seat Belts 2 Rear Wheels Front Grille Grille Support 13 14 15 16 17 18 6 Steering Column .25 x 2.85" Pin Steering Column Cap 12 Volt Charger 12 Volt Battery 2 Wire Clips Parts Not Shown Label Sheet #8 x 3/4" Screw - 19 K8285b-0920 BATTERY CHARGING ELECTRICAL HAZARD About Thermal Fuses WARNING Your Power Wheels® 12 volt battery is equipped with a built-in thermal fuse. The thermal fuse is a self-resetting safety device which automatically “trips” and shuts down operation of the vehicle if the vehicle is overloaded or the driving conditions too severe. Once a fuse has "tripped", remove your foot from the pedal and wait approximately 25 seconds before operating the vehicle again. To avoid repeated automatic shut-downs, do not overload the vehicle by exceeding the 130 lbs. (59 kg) maximum weight capacity or by towing anything behind the vehicle. Avoid severe driving conditions, such as driving up slopes or running into fixed objects, which can cause the wheels to stop spinning while power is still being supplied to the motors and make sure your child stops the vehicle before switching direction. If a thermal fuse in a battery continually trips under normal driving conditions, please contact your local Power Wheels® Authorized Service Center. For the location of the Authorized Service Center nearest to you, visit us on-line at www.powerwheels.com, or call 1-800-348-0751. • Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. - Use of the wrong type battery or charger could cause a fire or explosion resulting in serious injury. - Use of Power Wheels® components in products other than Power Wheels® vehicles could cause overheating, fire or explosion. • The battery must be handled by adults only. The battery is heavy and contains sulfuric acid (electrolyte). Dropping the battery could result in serious injury. • Never allow children to charge the battery. Battery charging must be done by adults only. A child could be injured by the electricity involved in charging the battery. • Read the safety instructions on the battery. • Examine the battery, charger and their connectors for excessive wear or damage each time you charge the battery. If damage or excessive wear is detected, do not use the charger or the battery until you have replaced the worn or damaged part. Important Notes • Your new battery must be charged for at least 18 hours before you use it in your vehicle for the first time. • We recommend that you start charging your battery before beginning assembly of your new vehicle. • The battery must be upright while charging. • The charger is not a toy. • Do not short circuit the battery. • You do not need to remove the battery from your vehicle to recharge it. • Before charging the battery, examine the battery case for cracks and other damage which may cause sulfuric acid (electrolyte) to leak during the charging process. If damage is detected, do not charge the battery or use it in your vehicle. Battery acid is very corrosive and can cause severe damage to surfaces it contacts. • Do not charge the battery on a surface (such as a kitchen counter top) which could be damaged by the acid contained inside the battery. Take precautions to protect the surface on which you charge your battery. • Use only a Power Wheels® 12 volt charger with "12 V" connector (input 120 VAC, 60 Hz with an output of 12 VDC, 1200 mA) to charge your Power Wheels® 12 volt battery. Adults Note: Regularly examine the charger for damage to the cord, plug, housing or other parts that may result in the risk of fire, electric shock or injury. In the event of any damage, do not use the charger until the damage has been properly repaired. Please call 1-800-348-0751. • If your battery is old and will not accept a charge, do not leave it in the vehicle. Always remove a dead battery from the vehicle. CAUTION Use the charger in dry locations only. 7 K8285b-0920 ASSEMBLY Power Indicator WARNING B Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. A Charger Connector • Plug the charger connector into the battery A . • Plug the charger into a standard wall outlet. The power indicator lights B . Notes: - If power flow to the wall outlet is controlled by a switch, make sure the switch is “ON”. - Use the charger only in a wall outlet. Do not plug the charger into a ceiling outlet. - The power indicator on the charger does not indicate the charge status of your battery. The power indicator allows you to see that there is power from the wall outlet. • Before first-time use, charge the battery for at least 18 hours. Never charge the battery longer than 30 hours. • Recharge the battery for at least 14 hours after each use of your vehicle. Do not charge the battery longer than 30 hours. • Once the battery is charged, disconnect the charger connector from the battery. Unplug the charger from the wall outlet. The battery is now ready to be installed in your vehicle. Please see the Battery Installation section on page 18 for detailed instructions on installing your battery. If your battery is already installed in your vehicle, simply re-connect the motor harness connector to the battery. Front Grille 1 Tab Slot • Fit the front grille to the vehicle, as shown. • Be sure the tabs on both ends of the grille fit into the groove in each fender. 8 K8285b-0920 Screws 2 Front Grille 10 4 TOP VIEW 24 11 12 13 DASH VIEW • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. • Place the labels exactly as shown in the illustration. For best results, avoid repositioning a label once it has been applied to the vehicle. • Insert four screws into the top of the front grille and tighten. Hint: You may need to push the ends of the front grille to insert and tighten the outer screws and push the center of the front grille to insert and tighten the middle screws. Front Wheel Well Steering Wheel Large Opening Steering Column 3 SIDE VIEW • Insert a screw through both front wheel wells and into the front grille. Tighten the screws. 5 Lower Bend Down • Wipe the steering column with a paper towel to remove any excess lubricant. • Position the steering wheel so that the large opening is upright. • Position the steering column with the lower bend down, as shown. • Fit the steering wheel onto the steering column. 9 K8285b-0920 Steering Column .25" x 2.85" Pin 6 8 • Align the hole in the steering wheel with the hole in the steering column. • Insert the .25" x 2.85" pin all the way through the hole in the side of the steering wheel and into the steering column, as shown. • Insert the end of the steering column down through the opening in the dash and down through the hole in the vehicle floor. Hint: You may need to turn the steering column to fit it through both openings. Steering Wheel Cover PRESS 7 9 • “Snap” the steering wheel cover onto the steering wheel. Hint: If the steering wheel cover does not "snap" onto the steering wheel, you have not properly assembled the steering column to the steering wheel. Remove the pin and the steering column from the steering wheel and refer back to Assembly steps 5 and 6. • Press the steering wheel down to "snap" into place. 10 K8285b-0920 Screws Cargo Bed 10 SIDE VIEW • Fit the cargo bed onto the back of the vehicle as shown. The four tabs on the cargo bed should fit into slots in the vehicle. 12 BOTTOM VIEW • Carefully turn the vehicle over. • Insert four screws into the underside of the vehicle and into the cargo bed. Tighten the screws. Steering Column Cap 11 Rear Wheel Well • Insert a screw up through both rear wheel wells and into the cargo bed. Tighten the screws. Hint: You may need the help of another adult to hold the cargo bed in place if you need to tip the vehicle slightly to tighten each screw. 13 • Fit the steering column cap onto the end of the steering column. 11 K8285b-0920 Screws Screw 14 • Insert a screw through the large opening in the steering column cap and the hole in the steering column. Tighten the screw. 16 • Fit the pegs on the underside of the grille support into the receptacles on the vehicle. • Insert two screws into the grille support and tighten. Grille Support 2 Loop 15 Slots Loop 17 • Fit the loops on grille support through the slots in the grille. Push to "snap" the loops in place. Rear Wheel Rear Axle • Slide a rear wheel onto the rear axle. Hint: Note the number on the inside of the wheel and on the bottom of the vehicle near the rear axle. The rear wheel with a 1 should match the 1 on the vehicle and the rear wheel with a 2 should match the 2 on the vehicle. 12 K8285b-0920 CORRECT 18 • Position the wire clip so that the wavy side is out. • Insert the straight side of the clip through the hole in the axle. INCORRECT 19 • Slide the clip so that the straight end goes through the other hole in the axle. • Make sure the straight end of the clip is through both holes in the axle. 20 INCORRECT • If the clip is upside down or not through both holes in the axle, you have not assembled it properly. Please remove the clip and go back to step 18. 13 K8285b-0920 Seat 21 Hubcap • Align the tabs on a hubcap with the slots in a rear wheel. “Snap” a hubcap into the center of the rear wheel. Hint: If the hubcap does not "snap" into place, you may not have assembled the wire clip properly. Remove the wire clip and refer back to step 18. • Repeat steps 17 - 21 to assemble the other rear wheel, wire clip and hubcap. Slots 23 BACK VIEW • Turn the vehicle upright. • Insert both tabs on the back edge of the seat into the slots inside the bed. Short Seat Belts Screws Long Seat Belt 22 • Insert the "T" fastener end of a short seat belt strap through the slot near the outer edge of the seat. Make sure the fastener side of the seat belt faces inward. Note: You will pull only one T-Loop through the slot. • Repeat this procedure to assemble the other short seat belt strap. • Insert each fastener end of the long seat belt strap through the slots in the center of the seat. Make sure the fasteners face the outer edge of the seat. • Pull each side of the long seat belt strap evenly through the slots. Make sure to pull each T-loop through a slot. 24 • Insert two screws through the back of the seat and into the vehicle. Tighten the screws. 14 K8285b-0920 Screws 25 TOP VIEW • Insert two screws into the tabs on the front edge of the seat and tighten. 26 FRONT VIEW • Fit the long tabs on the hood into the slots in the front end of the vehicle. • Pull the hood forward and lower. Note: The hood is held down by magnets. Simply lift to open the hood. Do not use around items that are sensitive to or affected by magnetic fields. 15 K8285b-0920 1.5V x 4 "C" (LR14) 27 Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). • Insert batteries as indicated inside the battery compartment. • Remove batteries during long periods of non-use. Always remove exhausted batteries from the toy. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak. • Never short-circuit the battery terminals. • Use only batteries of the same or equivalent type, as recommended. • Do not charge non-rechargeable batteries. • Remove rechargeable batteries from the toy before charging. • If removable, rechargeable batteries are used, they are only to be charged under adult supervision. DASH VIEW • Locate the radio on the dash. • Loosen the screws in the radio cover and remove it. • Insert four “C” (LR14) alkaline batteries Hint: We recommend using alkaline batteries for longer battery life. • Replace the radio cover and tighten the screws. • When sounds become faint or stop, it’s time for an adult to change the batteries! • Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities (Europe only). 16 K8285b-0920 DECORATION • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. • Place the labels exactly as shown in the illustrations. For best results, avoid repositioning a label once it has been applied to the vehicle. • After applying a label, rub the label firmly with a clean, dry cloth to make sure the label is adhered to your vehicle. Start at the center of a label, and smooth towards the outer edges to remove air bubbles. 14 18 TOP VIEW 23 20 6 7 8 FRONT VIEW 15 16 25 23 22 20 3 RIGHT SIDE VIEW 1 3 3 21 LEFT SIDE VIEW 9 5 1 4 19 17 3 2 REAR VIEW 17 K8285b-0920 BATTERY INSTALLATION IMPORTANT! Use only a Power Wheels® 12 volt lead-acid rechargeable battery with built-in thermal fuse. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels® 12 volt charger before operating your vehicle for the first time. Charge the battery for at least 14 hours after each use of the vehicle. Never charge the battery longer than 30 hours. Failure to follow these instructions may damage your battery and will void your warranty. Power Wheels® 12 Volt Battery 2 Battery Retainer • First lift and then slide the battery retainer toward you. • Then, place the battery in the battery compartment. Make sure the battery retainer slides over the top of the battery. • Close the hood. 1 Motor Harness Connector • Lift the hood. • Plug the motor harness connector into the battery. 18 K8285b-0920 BATTERY CARE AND DISPOSAL Disposal Care If a battery leak develops, avoid contact with the leaking acid and place the damaged battery in a plastic bag. See information below for proper disposal. If acid comes in contact with skin or eyes, flush with cool water for at least 15 minutes and call a physician. If acid is internally ingested, give water, milk of magnesia or egg whites immediately. Never give emetics or induce vomiting. Call a physician. • Charge a new battery for at least 18 hours before first use. Never charge the battery longer than 30 hours. Overcharging or undercharging the battery may shorten battery life and decrease vehicle running time. • After the first charge, recharge the battery for at least 14 hours after each use. Never charge the battery longer than 30 hours. Charge the battery after each use, regardless of how long the vehicle was used. • The battery must be upright while charging. • Do not allow the battery to run down completely before charging. • Charge the battery before storing the vehicle. • Charge the battery at least once per month, even if the vehicle has not been used. • Leaving the battery in a discharged condition will ruin it. • Always remove an exhausted battery from the vehicle. Battery leakage and corrosion can damage the vehicle. • Do not store the battery on a surface (such as a kitchen counter top) which could be damaged by the acid contained inside the battery. Take precautions to protect the surface on which you store the battery. • Do not store the battery in temperatures above 75° F or below -10° F. • Use only a Power Wheels® 12 volt battery. Remember to charge the new battery for at least 18 hours before first use. • Prevent the battery from moving freely inside the battery compart-ment. Always use the battery retainer to secure the battery in the battery compartment. • Examine the battery, charger and their connectors for excessive wear or damage each time you charge the battery. If damage is detected, do not use the charger or the battery until you have replaced the worn or damaged part. • Your Power Wheels® battery is a non-spillable, sealed lead-acid battery. It must be recycled or disposed of in an environmentally sound manner. • Do not dispose of a lead-acid battery in a fire. The battery may explode or leak. • Do not dispose of a lead-acid battery in your regular, household trash. The incineration, landfilling or mixing of sealed lead-acid batteries with household trash is prohibited by law in most areas. • Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities (Europe only). • Return an exhausted battery to a federal or state approved lead-acid battery recycler, such as a Power Wheels® authorized service center or a local seller of automotive batteries. For the authorized service center location nearest to you, please visit us on-line at www.powerwheels.com or call 1-800-348-0751. Contact your local waste management officials for other information regarding the environmentally sound collection, recycling and disposal of lead-acid batteries. If you live in the State of Florida or the State of Minnesota, it is prohibited by law for anyone to throw away lead-acid batteries in the municipal waste stream. 19 K8285b-0920 SAFE DRIVING RULES Teach Safety Rules to Children RIDING HAZARD While children can quickly develop the skill necessary to drive this vehicle, it is important to remember that their judgment skills are still very immature. Unsupervised driving by children can lead to serious injury. Before children use this vehicle, an adult should carefully evaluate the driving area as well as the children’s skill level and ability to drive this vehicle safely. Children are not always able to recognize or anticipate hazards, even when they have been taught about them. There is no acceptable substitute for direct adult supervision. Teach appropriate safety rules to your child before allowing operation of this vehicle. These rules should also be reviewed with neighborhood children or other playmates who want to drive this vehicle. WARNING • Prevent Injuries and Deaths • Direct Adult Supervision Required. • Never Ride at Night. • Keep Children Within Safe Riding Areas. These areas must be: - away from swimming pools and other bodies of water to prevent drownings - generally level to prevent tipovers - away from steps, steep inclines, cars, roads and alleys. • Riding Rules Make sure children know and follow these rules for safe driving and riding. - Always sit on the seat. - Always wear shoes. - Only 2 (two) riders at a time. - Never ride in cargo bed. Riding Rules Make sure children know and follow these rules for safe driving: 1. Always sit on the seat. 2. Always wear shoes. 3. Only 2 (two) riders at a time. A child who is not sitting on the seat or who is standing on the vehicle could fall off, cause a tip-over or block the driver’s view. A child could be seriously injured. 4. Never ride in the cargo bed. Cargo bed weight limit is 25 lbs (11.3 kg). 5. Do not allow any child to drive the vehicle in the street or near moving (motorized) vehicles. 6. Do not allow any child to drive near bodies of water (such as pools or creeks), obstructions (such as furniture, low tree limbs or play equipment), or drop-offs (such as stairs or decks). 7. Do not allow any child to drive the vehicle in the dark. A child could encounter unexpected obstacles and have an accident. Operate the vehicle only in the daytime or a well-lit area. 8. Teach your child to avoid driving on steep inclines or slopes. Restrict your child's driving to areas that are fairly level with gentle inclines or slopes. 9. Do not allow your child to drive down or across a steep slope. - The vehicle may gain unsafe speed, even if the pedal is released to stop. - The vehicle may tilt and tip over. - The wheels could lose traction, causing the vehicle to slip. 10. Do not allow your child to drive up steep inclines. The motor may stop and the vehicle could roll backwards at an unsafe speed. 11. Never put anything near any moving parts. Rotating parts such as motors, gear boxes and wheels can snag fingers, hair, etc., causing serious injury. Do not allow operation of the vehicle when it is on its side or in an upside-down position. 12. Do not operate the vehicle near flammable vapors (gasoline, paint thinner, acetone, liquid wax, etc.). The vehicle’s electrical switches, like most electrical switches, emit an internal spark when first turned on or turned off. The presence of flammable liquids or vapors could cause an explosion or a fire. Keep all flammable products in tightly sealed containers and away from the vehicle. 13. Do not allow a child to operate the vehicle without direct adult supervision. To prevent unsupervised use of the vehicle, disconnect the motor harness from the battery when the vehicle is not in use. Restrict your child's driving to areas that are generally level. 20 K8285b-0920 VEHICLE OPERATION As assembled, your vehicle is ready to roll in low speed (21/2 mph, maximum). After your child has mastered the basic skills of driving and understands the rules for safe driving, it’s time to remove the high speed lock-out screw to allow the vehicle to operate in low or high speed. See the instructions in this section to remove the high speed lock-out screw. STOP! Low Speed • Your vehicle has a patented, electronic braking system that auto-matically stops the vehicle when your child’s foot lifts from the pedal. • Make sure your child is comfortable with steering the vehicle and automatically knows how to stop. High Speed • Make sure the shifter is in the low speed position . • Press down on the foot pedal. The vehicle moves forward at a maximum of 2 1/2 mph. Help your child practice steering to learn how far and how quickly to turn the steering wheel when driving forward in low speed. Store lock-out screw here Remove lock-out screw for high speed. To Back Up • Before you disconnect the high speed lock-out, make sure your child knows how to steer, how to start and stop the vehicle and knows the rules for safe driving. When the high speed lock-out is disconnected, the vehicle can be driven forward in low speed (2 1/2 mph, maximum) or high speed (5 mph, maximum). • Make sure the shifter is in the low speed position. • Loosen and remove the screw in the shifter base. • Place the lock-out screw into the hole in the shifter handle for future use. It can be re-inserted into the shifter base to lock-out high speed. IMPORTANT! To avoid damaging the motors and gears, stop the vehicle before shifting from forward to reverse. • Once your child is completely comfortable with operating the vehicle in the forward mode, introduce reverse. • Make sure the shifter is in the reverse position. • Press down on the foot pedal.The vehicle will go in reverse at a maximum of 2 1/2 mph. The vehicle is designed to operate in low speed only in reverse. Help your child practice steering to learn how far and how quickly to turn the steering wheel when driving in reverse. • Make sure the shifter is in the high speed position. • Press down on the foot pedal. The vehicle moves forward at a maximum of 5 mph. Help your child practice steering to learn how far and how quickly to turn the steering wheel when driving forward in high speed. 21 K8285b-0920 CHARGE INDICATOR CARGO BED Button 12 VOLT BATTERY CHARGE INDICATOR • Lift and lower the tailgate to open. • To close the tailgate, lift and lower it back in place. Note: Cargo bed weight limit is 25 lbs (11.3 kg). • Press the 12 volt battery charge indicator button to check the power level of your battery: All four lights means the 12 volt battery is 100% (fully) charged. Three lights means the 12 volt battery is 75% (mostly) charged. VEHICLE CARE Two lights means the 12 volt battery is 50% charged. We recommend recharging your battery for 14 hours. One or no lights means the 12 volt battery needs charging. Fully charge your battery for 14 hours. Hint: For the most accurate reading, do not press the battery charge indicator while the vehicle is moving. • Check all screws regularly and tighten as required. Check plastic parts on a regular basis for cracks or broken pieces. • During snowy or rainy weather, the vehicle should be stored inside or under a protective cover. Remember to charge the battery at least once per month while your vehicle is not in regular use. • An extremely dirty vehicle can be rinsed with a hose but avoid spraying directly into switches, motors and battery compartment. Water or moisture in the motors or electrical switches can cause them to corrode, and could cause switch or motor failure. • Avoid operating the vehicle on sand. Sand in the motors or electrical switches can cause them to jam, and could cause switch or motor failure. • The vehicle can be wiped down with a soft, dry cloth. For a shiny finish, you can wipe plastic parts with a non-wax furniture polish applied to a soft-cloth. Do not use automotive wax. • To ensure that your vehicle stays in good operating order, we recommend that you periodically have your vehicle checked by a Power Wheels® authorized service center. For the location of the authorized service center nearest you, please visit us on-line at www.powerwheels.com or call 1-800-348-0751. FM RADIO Power Scan Reset Volume Main Reset Button Scan • • • • • Press the power button to turn on or off. Turn the volume dial to adjust to a comfortable listening level. Press the scan button to find a station. Press the scan button again to go to the next station. To reset the radio to the first station (88.5), press the scan reset button . • FM Radio reception varies from area to area. If the tuned station is lost due to poor reception, the radio automatically scans to the next station with good reception. Hint: The FM Radio will turn off automatically after several minutes of non-use. Each time power is turned off and back on, the FM Radio will reset to 88.5. IMPORTANT! If the FM Radio functions erratically, press the main reset button with the point of a pen (or similar object). 22 K8285b-0920 PROBLEMS AND SOLUTIONS IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still experience a problem, please contact Power Wheels® Consumer Relations, toll-free at 1-800-348-0751 between 9 AM - 7 PM (EST) Monday through Friday and 11 AM - 5 PM (EST) Saturday. Or, contact your local Power Wheels® authorized service center. For the location nearest you, please visit us on-line at www.powerwheels.com, or call 1-800-348-0751. PROBLEM Vehicle does not run POSSIBLE CAUSE SOLUTION Undercharged battery Charge the battery. A new battery should have been charged for at least 18 hours before using the vehicle for the first time. After firsttime use, recharge the battery for at least 14 hours after each use. Never charge the battery longer than 30 hours. Check all connectors. Make sure the charger connector is plugged into the battery, and that the charger is plugged into the wall. Make sure power flow to the wall outlet is “ON”. Charger is not working There is no sure way to tell if your charger is working unless you have a volt meter. If you suspect there is a problem with your charger, contact your local Power Wheels® authorized service center. They can test your charger for you. Tripped thermal fuse The built-in thermal fuse may “trip” and shut down operation of the vehicle if the vehicle is overloaded or the driving conditions too severe. Once a fuse has “tripped”, remove your foot from the pedal and wait approximately 25 seconds before operating the vehicle again. To avoid repeated automatic shutdowns, do not overload the vehicle by exceeding the 130 lbs. (59 kg) maximum weight capacity or by towing anything behind the vehicle. Do not drive up hills or run into fixed objects, which can cause the wheels to stop spinning while power is still being supplied to the motors. If a thermal fuse continually trips, contact your local Power Wheels® authorized service center. Loose wire or loose connectors Check all wires and connectors. Make sure the motor harness connector is plugged into the battery, and that there are no loose wires around the motors. Dead battery If your battery is old or if you have not followed Battery Care instructions, your battery may be dead. If you are unsure whether or not the battery is dead, you can have it tested at your local Power Wheels® authorized service center. Electrical switch damage The electrical switches can become corroded due to exposure to water or moisture, or can jam due to loose dirt, sand or gravel. Contact your local Power Wheels® authorized service center for diagnosis and repair. Motor damage Contact your local Power Wheels® authorized service center for diagnosis and repair. 23 K8285b-0920 PROBLEM Vehicle was running but suddenly stopped Short run time (Less than 1 - 3 hours per charge) POSSIBLE CAUSE SOLUTION Loose wire or loose connectors Check all wires and connectors. Make sure the motor harness connector is plugged into the battery, and that there are no loose wires around the motors. Tripped thermal fuse The built-in thermal fuse may "trip" and shut down operation of the vehicle if the vehicle is overloaded or the driving conditions too severe. Once a fuse has “tripped”, remove your foot from the pedal and wait approximately 25 seconds before operating the vehicle again. To avoid repeated automatic shutdowns, do not overload the vehicle by exceeding the 130 lbs. (59 kg) maximum weight capacity or by towing anything behind the vehicle. Do not drive up hills or run into fixed objects, which can cause the wheels to stop spinning while power is still being supplied to the motors. If a thermal fuse continually trips, contact your local Power Wheels® authorized service center. Undercharged battery Charge the battery. A new battery should have been charged for at least 18 hours before using the vehicle for the first time. After firsttime use, recharge the battery for at least 14 hours after each use. Never charge the battery longer than 30 hours. Check all wires and connectors. Make sure the charger connector is plugged into the battery, and that the charger is plugged into the wall. Make sure power flow to the wall outlet is “ON”. Overcharged battery Do not charge the battery longer than 30 hours. If you suspect that your battery is damaged as a result of overcharging, contact your local Power Wheels® authorized service center. They can test your battery for you. Battery is old and will not accept full charge Even with proper care, a rechargeable battery does not last forever. Average battery life is 1 to 3 years depending on vehicle use and use conditions. Replace the battery with a new Power Wheels® 12 volt battery. Do not substitute parts. Tripped thermal fuse The built-in thermal fuse may “trip” and shut down operation of the vehicle if the vehicle is overloaded or the driving conditions too severe. Once a fuse has “tripped”, remove your foot from the pedal and wait approximately 25 seconds before operating the vehicle again. To avoid repeated automatic shutdowns, do not overload the vehicle by exceeding the 130 lbs. (59 kg) maximum weight capacity or by towing anything behind the vehicle. Do not drive up hills or run into fixed objects, which can cause the wheels to stop spinning while power is still being supplied to the motors. If a thermal fuse continually trips, contact your local Power Wheels® authorized service center. 24 K8285b-0920 PROBLEM Vehicle runs sluggishly POSSIBLE CAUSE Undercharged battery SOLUTION Charge the battery. A new battery should have been charged for at least 18 hours before using the vehicle for the first time. After firsttime use, recharge the battery for at least 14 hours after each use. Never charge the battery longer than 30 hours. Check all connectors. Make sure the charger connector is plugged into the battery, and that the charger is plugged into the wall. Make sure power flow to the wall outlet is “ON”. Battery needs charging Be sure to charge the battery after each use. Battery is old and will not accept full charge Even with proper care, a rechargeable battery does not last forever. Average battery life is 1 to 3 years depending on the vehicle use and use conditions. Replace the battery with a new Power Wheels® 12 volt battery. Do not substitute parts. Vehicle is overloaded Make sure you do not overload the vehicle by allowing more than one rider at one time, by exceeding the 130 lb. (59 kg) maximum weight capacity, or by towing objects behind the vehicle. Driving conditions are too stressful Restrict your child's driving to areas that are generally level with gentle inclines or slopes. High speed lock-out not disconnected The vehicle was pre-set to run only in low speed. To allow the vehicle to run in low and high speed, you must disconnect the High Speed Lock-Out. Follow the instructions on page 21 to remove the High Speed Lock-Out screw. When the foot pedal is pressed one rear wheel spins Operation of vehicle in low speed It is possible that only one rear wheel may spin when both rear wheels are raised off the ground and the vehicle is in low speed. This does not necessarily indicate a problem. Check for proper operation of the drive system by raising the rear wheels off the ground and pressing the foot pedal. If only one rear wheel spins, carefully press your hand on the spinning wheel to slow it down. The other rear wheel should begin to spin. If the other rear wheel does not begin to spin, there may be a problem with the vehicle. Contact your local Power Wheels® authorized service center for diagnosis and repair. Sometimes the vehicle doesn’t run, but other times it does Loose wire or connector Check all wires around the motors and all connectors to make sure they are tight. Motor or electrical switch damage Contact your local Power Wheels® authorized service center for diagnosis and repair. Loose wire or connector Check all wires around the motors and all connectors to make sure they are tight. “Dead Spot” on motor Contact your local Power Wheels® authorized service center for diagnosis and repair. Damaged battery Contact your local Power Wheels® authorized service center for diagnosis and repair. Child is switching between FORWARD and REVERSE without stopping Teach your child to stop the vehicle before switching direction. Vehicle runs in low speed, but does not run in high speed. Please note: The vehicle is designed to operate in low speed only in reverse . When the go foot pedal is pressed, the vehicle won’t run without a push Battery's thermal fuse constantly "trips", but the vehicle is not overloaded nor the driving conditions too severe 25 K8285b-0920 PROBLEM POSSIBLE CAUSE SOLUTION Loud clacking or grinding noise from a motor-gearbox Broken gears Contact your local Power Wheels® authorized service center for diagnosis and repair. Charger gets warm during use It is normal for some chargers to get warm during use and is not reason for concern. No action required. If your charger does not get warm during use, it does not mean that it is not working properly. Battery makes a sizzling or gurgling noise when charging It is normal for some batteries to make noise and swell slightly while charging and is not reason for concern. No action required. If your battery does not make noise or swell slightly during charging, it does not mean that it is not accepting the charge. FM Radio does not function FM Radio station changes automatically FM Radio functions erratically Power is off Power automatically turns off after several minutes of non-use. Press the power button to turn it back on. Batteries are weak or dead Replace all four batteries with four, new "C" (LR14) alkaline batteries. Poor reception You may find better reception of a particular station in a different location. Power was turned off and the radio reset back to the first station Use the scan button to reset to your favorite station. Electronic lock-up Press the main reset button on the front of the unit with the point of the pen (or similar object). 26 K8285b-0920 FCC STATEMENT LIMITED WARRANTY (United States Only) Bumper-to-Bumper* Limited Warranty This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Consult the dealer or an experienced radio/TV technician for help. Note: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. One year limited warranty from the date of purchase on the Power Wheels® vehicle. Six month limited warranty on the 12 volt battery. For the original purchaser, this one year limited warranty covers the Power Wheels® ride-on vehicle (purchased from Power Wheels®) against defects in materials and workmanship. The six month limited warranty applies only to the 12 volt battery included by Power Wheels® with the original purchase of the vehicle. This warranty covers normal use and does not cover the Power Wheels® vehicle or battery if damaged by unreasonable use, neglect, accident, abuse, misuse, improper service or other causes not arising out of defects in materials or workmanship. Evidence of any attempt at consumer repair will void this warranty. THIS WARRANTY DOES NOT COVER, AND IS INTENDED TO EXCLUDE, ANY LIABILITY ON THE PART OF POWER WHEELS®, WHETHER UNDER THIS WARRANTY OR IMPLIED BY LAW FOR ANY INDIRECT OR CONSEQUENTIAL DAMAGES FOR BREACH OF WARRANTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION SO THIS LIMITATION MAY NOT APPLY TO YOU. Should you need service or assistance with your vehicle during the warranty period, do not return the vehicle to the store. Power Wheels® has provided a nationwide network of authorized service centers. If there is not an authorized service center in your area, please visit us on-line at www.powerwheels.com or call Consumer Relations for information, 1-800-348-0751. This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. PLEASE SAVE YOUR ORIGINAL SALES RECEIPT. ICES-003 • This Class B digital apparatus complies with Canadian ICES-003. • Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. 27 K8285b-0920 Before first-time use, you must charge the battery 18 hours! Charge the battery immediately after each use. Charge the battery once a month, even if the vehicle is not used or stored. Do not return your vehicle to the store! Or contact your local independently owned and operated Power Wheels® Authorized Service Center. For the location nearest you, visit us on-line at www.powerwheels.com. Ford Oval and F-150 are registered trademarks owned and licensed by Ford Motor Company. Manufactured by Fisher-Price, Inc., a subsidiary of Mattel, Inc. www.ford.com Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 U.S.A. ©2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN MEXICO K8285b-0920