Official Software
Get notified when we add a new BeijingOther Model Manual
Summary of Content
Vehicle Application Installation Instructions TrekStep™ • Ford Super Duty F-250 / F-350 / F-450 1999 – Current Part Number: 75303-15 www.bestop.com - We’re here to help! Visit our web site and click on “Ask a Question”. Click here for more Truck Accessories by Bestop. INSTALLATION TIME SKILL LEVEL 1/2 Hour 1 - Easy TOOLS 17 mm and 21 mm 3/16" TrekStep™ – Installation Instructions Parts List and Hardware Identi cation Left End Cap, Part Number 460.83, Qty - 1 Running Board Assembly, Part Number 476.24, Qty - 1 M6-1.0 x 10mm Socket Cap Screw, Part Number 460.85, Qty - 2 Linkage Assembly, Part Number 476.01, Qty - 1 Locate Rear Bumper Attachment Locate the rear bumper attachment point on the driver’s side of the vehicle. T-Nut Insert, Part Number 460.84, Qty - 2 M6 Nut Plate, Part Number 460.86, Qty - 2 Right End Cap, Part Number 460.82, Qty - 1 Mounting Bracket, Part Number 476.04, Qty - 1 Remove Rear Bumper Fasteners Remove the bumper fasteners. Set them aside to be reused. M10 Washer, Part Number 473.20, Qty - 2 M6-1.0 x 20 Socket Cap Screw, Part Number 470.00, Qty - 3 M10-1.5 x 65 Partial Thread Hex Head Screw, Part Number 476.02, Qty - 2 Rev. C 0810 75303 pg. 2 TrekStep™ – Installation Instructions Assemble Linkage to Mounting Bracket Install Linkage Assembly Assemble the Mounting Bracket to the Linkage. Use the set of holes that applies to your vehicle. M10-1.5 x 65 Partial Thread Hex Head Screw Slide the holes in the Mounting Bracket over the studs on the vehicle. Reinstall the fasteners removed in Step 2. Install Step Use the M6-1.0 x 20 Socket Head Cap Screws to mount the Step to the Linkage Assembly. M10 Washer Mounting Bracket ALL MODELS Linkage M6-1.0 x 20 Socket Head Cap Screws Adjust Step Adjust the Step from side to side. Make sure to leave clearance for foot access to lower step. Tighten the allen head bolts. Operation • • • • • The TrekStep™ is foot operated and deploys and retracts with a nudge of your foot. To deploy, press down using your left foot, on the forward outside corner of the step pad. To retract, gently kick the underside of the step pad. Max Load Capacity: 300 lbs. Always use appropriate hand holds when stepping up to or down from your truck’s cargo bed. Maintenance Tips The step pad surface and linkage arms can be washed with mild soap and water using a soft brush or sponge to dislodge any mud, dirt or accumulated road grime. Rinse with fresh water. To prevent slipping, avoid applying waxes, lubricants or protectants like Armor All® to the step surface. Allow foot access to lower step Attention! TrekStep™ SHOULD ALWAYS BE STOWED IN THE RETRACTED POSITION WHEN DRIVING. Rev. C 0810 75303 pg. 3 TrekStep™ – Installation Instructions LIMITED WARRANTY We warrant our product to be free from defects in material and workmanship, for the terms speci ed below, provided there has been normal use and proper maintenance. This warranty applies to the original purchaser only. All remedies under this warranty are limited to the repair or replacement of any item or items found by the factory to be defective within the time period speci ed. If you have a warranty claim, rst you must call our factory at the number below for instructions. You must retain proof of purchase and submit a copy with any items returned for warranty work. Upon completion of warranty work, if any, we will return the repaired or replaced item or items to you freight prepaid. Damage to our products caused by accidents, re, vandalism, negligence, misinstallation, misuse, Acts of God, or by defective parts not manufactured by us, is not covered under this warranty. THE WARRANTY TIME PERIOD IS AS FOLLOWS FOR ALL TrekSteps™ MANUFACTURED BY OUR COMPANY: THREE YEARS / 36,000 MILES FROM DATE OF PURCHASE. ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY ARE LIMITED IN DURATION TO THE SAME DURATION AND SCOPE AS THE EXPRESS WRITTEN WARRANTY. OUR COMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you speci c legal rights, and you may also have other rights which vary from state to state. For further information or request for warranty work, please contact: Bestop Inc. Customer Service Toll-Free: (800)845-3567 Main: (303)465-1755 E-mail: [email protected] Website: www.Bestop.com Rev. C 0810 75303 pg. 4