Official Software
Get notified when we add a new DaewooNubira Manual

We cover 22 Daewoo vehicles, were you looking for one of these?

Summary of Content
Factory Workshop Manual Make Daewoo Model Nubira Sx Wagon Engine and year L4-2.0L DOHC D-TEC MFI (1999) Please navigate through the PDF using the options provided by on the sidebar. This manual was submitted by Anonymous Date 1st January 2018 Daewoo Nubira Sx Wagon Workshop Manual (L4-2.0L DOHC D-TEC MFI (1999)) Daewoo Workshop Manuals > Relays and Modules > Relays and Modules - Brakes and Traction Control > ABS Light Relay > Component Information > Service and Repair ABS Light Relay: Service and Repair LAMP DRIVER MODULE The lamp driver module is taped to the ABS wiring harness near the electronic brake control module (EBCM), above the left-side kick panel. Removal Procedure 1. Disconnect the negative battery Gable. 2. Move the wiring harness to allow access to the lamp driver module. 3. Open the lamp driver module cover. 4. Remove the module from the housing. Inserting the blade of a screwdriver into the slot near the end of the card and using the screwdriver as a lever to free the card from its connector inside the housing may be needed. Installation Procedure