Toyota - Land Cruiser - Workshop Manual - 1996 - 2000

S4.1 CarProg TOYOTA immobiliser manual Toyota Model 4 RUNNER ARISTO AURIS AVALON AVENSIS AYGO CAMRY CARINA CELICA CELSIOR COLORADA COROLLA ECHO ESTIMA (J) GAIA (J) HIACE HIGHLANDER HILUX (J) IPSUM (J) LANDCRUISER, 100 LANDCRUISER, 100 MATRIX MR2 PASEO PICNIC PLAZ (J) PRADO PREVIA PRIUS Year 1999-2003 200319981998-2003 20031998-1999 2000-2003 200320051997-2003 20031996- 1996-1999 2000199819971996-1999 1999-2002 1999-2002 1999-2002 2002200219991997199919972001-2003 2004199919991996-2000 2000-2003 2003200419971997199619991996199720032001-2003 2003- Transponder type TEX TEX/CR TEX TEX TEX TEX/CR TEX TEX/CR TEX/CR TEX/CR TEX TEX/CR PHI PHI TEX PHI TEX TEX TEX TEX TEX TEX TEX TEX/CR TEX/CR TEX PHI TEX TEX TEX TEX/CR TEX TEX TEX TEX TEX/CR TEX/CR TEX PHI TEX TEX TEX PHI TEX/CR TEX TEX/CR All right reserved www.codecard.lt Instruction S4.1.1 S4.1.1 S4.1.1 68HC05E6 68HC05E6 S4.1.1 IC601 93C56 S4.1.1 S4.1.1 S4.1.1 S4.1.2 24C02 ECU 95080 ECU 95080 ECU 24C02 ECU S4.1.1 S4.1.1 S4.1.1 S4.1.1 S4.1.1 S4.1.1 S4.1.1 S4.1.2 IC601 93C56 S4.1.3 S4.1.1 24C04 S4.1.1 S4.1.1 S4.1.1 24C04 S4.1.3 1 PROGRESS NC300 RAV 4 SEQUOIA SIENNA SCION SOLARA STARLET TACOMA TARAGO TUNDRA YARIS 19981996-2004 20052001-2003 20031999-2003 200420041999-2003 2004199720031999-2002 1999-2002 2003- TEX TEX TEX/CR TEX TEX/CR TEX TEX/CR TEX/CR TEX TEX/CR PHI TEX TEX/CR TEX TEX TEX TEX/CR S4.1.1 S4.1.1 25080 ECU S4.1.1 S4.1.3 S4.1.1 S4.1.3 S4.1.3 S4.1.1 S4.1.3 S4.1.1 S4.1.1 25020 ECU 25080 ECU 95080 ECU S4.1.1 Older Toyota immobiliser system with separated immo box and Texas transponder (4D by Silca). Immobiliser box are located near to ignition key. Usually this is black or brown box marked “immobilizer” or “134.2 kHz”. All right reserved www.codecard.lt 2 Remove immobiliser ECU from the car and open it. Find 93CL66 EEPROM in DIP package. Use A5 or A4 adapter and follow CarProg instruction to program transponder key. Short quartz resonator for in-circuit EEPROM programming or remove 93C66 from immobiliser board. S4.1.2 Toyota immobiliser system with transponder antenna and AMP unit on the ignition key and motor ECU. Used in 1999 – 2003 Toyota/Lexus cars. All right reserved www.codecard.lt 3 Transponder information is stored in motor ECU. Remove motor ECU from the car, open it and find 93C56 EEPROM marked IC900. Use A6 or A4 adapter and follow CarProg instruction to program transponder key. Remove 93C56 from ECU board, in-circuit programming is not stable. All right reserved www.codecard.lt 4 S4.1.3 Toyota cars with Texas Crypto transponder (4D by Silca). Transponder key is stored in separated immobiliser unit marked “ECU IMMOBILIZER”. Remove immobiliser ECU from the car, open it and find 93LC66 SMD EEPROM. All right reserved www.codecard.lt 5 Use only original factory key. With Silca 4D transponder car will not start. Use A6 or A4 adapter and follow CarProg instruction to program transponder key. Short quartz resonator for in-circuit EEPROM programming or remove 93C66 from immobiliser board. S4.1.4. European Toyota immobiliser system used in small engines ECU like Yaris or Corolla. Remove motor ECU (made by Bosch) from car and open it. Find 25040 or 25020 EEPROM in SMD package. Use A6 or A4 adapter and follow CarProg instruction to program transponder key. Short quartz resonator for in-circuit EEPROM programming or remove EEPROM from ECU board. All right reserved www.codecard.lt 6 All right reserved www.codecard.lt 7 S4.1.5. European Toyota immobiliser system used from 2003 in small engines ECU like Yaris or Corolla. Used key is Texas 4C transponder. All right reserved www.codecard.lt 8 Remove motor ECU (made by Bosch) from car and open it. Find 95080 or 25080 EEPROM in SMD package. Use A6 or A4 adapter and follow CarProg instruction to program transponder key. Short quartz resonator for in-circuit EEPROM programming or remove EEPROM from ECU board. S4.1.6. European Toyota immobiliser system used in small engines ECU like 1.4 VVT Corolla. Remove motor ECU (made by Bosch) from car and open it. Find 24C02 EEPROM in SMD package. Use A6 or A4 adapter and follow CarProg instruction to program transponder key. All right reserved www.codecard.lt 9 S4.1.7 Older Toyota immobiliser system with separated immo box and Philips PCF7931 transponder. Immobiliser box are located under dash panel. Usually this is brown box marked “immobilizer” or “125 kHz”. All right reserved www.codecard.lt 10 Remove immobiliser ECU from the car and open it. Find 24C04 EEPROM in DIP package. Use A5 or A4 adapter and follow CarProg instruction to program transponder key. Short quartz resonator for in-circuit EEPROM programming or remove 24C04 from immobiliser board. S4.1.8 Toyota immobiliser system with transponder antenna and AMP unit on the ignition key and motor ECU. Used in 2001 – 2003 Toyota/Lexus cars. All right reserved www.codecard.lt 11 Transponder information is stored in motor ECU. Remove motor ECU from the car, open it and find 93C56 EEPROM marked IC601 Use A6 or A4 adapter and follow CarProg instruction to program transponder key. Remove 93C56 from immobiliser board. S4.1.9 Toyota Avensis or Corolla immobiliser system with transponder antenna and AMP unit (on the ignition key lock) and motor ECU. Transponder 4C. Are two very similar immobiliser types – with Texas transponder and with Texas Crypto transponder. Different is only processor inside immobiliser: • Texas 4C: (immobiliser unit: 89730-05010) – works only this system! • Texas Crypto with “Valeo” mark on the blade (immobiliser unit: 89780-02010; Key blank: 89785-02050, key with remote: 89070-05020) All right reserved www.codecard.lt 12 Use A9 adapter, connect like in picture ( pull up pins 1, 2 and 15 and connect white, blue, green, yellow, orange, black and red wires) and follow CarProg instruction to program transponder key. All right reserved www.codecard.lt 13