Get notified when we add a new AroSpartana Manual

We cover 60 Aro vehicles, were you looking for one of these?

Skoda - Auto - skoda-karoq-2017-110444
Skoda - Auto - skoda-karoq-2017-brukerhandbok-110449
Skoda - Auto - skoda-karoq-2017-110460
Skoda - Auto - skoda-karoq-2017-ipasnieka-rokasgramata-110447
Skoda - Auto - skoda-karoq-2017-110457
Skoda - Auto - skoda-karoq-2017-omistajan-kasikirja-110439
Skoda - Auto - skoda-karoq-2017-manual-del-propietario-110438
Skoda - Auto - skoda-karoq-2017-savininko-vadovas-110446
Cars & Automotive Accessories - Kenwood - C929
Toys & Accessories - Lego - DUPLO Town - AROUND THE WORLD - 10805
Skoda - Auto - skoda-karoq-2017-kullan-m-k-lavuzu-110458
Barossa - Motorcycle - Barossa__Barossa_PYTHON_100cc_parts_5d8a7f921c3648a62136367
Skoda - Auto - skoda-karoq-2017-navod-k-obsluze-110433
Skoda - Auto - skoda-karoq-2017-110453
Skoda - Auto - skoda-karoq-2017-handleiding-110448
Pool Equipment - Haywood-Pool - Super Pump~All Super Pump Models
Skoda - Auto - skoda-karoq-2017-prirocnik-za-lastnika-110456
Skoda - Auto - skoda-karoq-2017-110431
VCRs & Accessories - Hitachi Electronics - VTM171A
Skoda - Auto - skoda-karoq-2017-instrukcja-obslugi-110450
Skoda - Auto - skoda-karoq-2017-agarmanual-110454
Skoda - Auto - skoda-karoq-2017-manualul-de-utilizare-110452
Barossa - Motorcycle - Barossa_PYTHON_100cc_parts
1981-1995--Chrysler--Lebaron--4 Cylinders J 2.5L MFI Turbo SOHC--31034803
1981-1995--Chrysler--Lebaron--4 Cylinders C 2.2L FI Turbo SOHC--31006701
Skoda - Auto - skoda-karoq-2017-manual-do-proprietario-110451
Furniture & Storage - Blue Rhino - GAD1375SP
Skoda - Auto - skoda-karoq-2017-110441
Barossa - Motorcycle - Barossa__Barossa_PYTHON_100cc_parts
Sewing Machine - Singer - 14T968DC %7C PROFESSIONAL 5
Skoda - Auto - skoda-karoq-2017-manuel-du-proprietaire-110440
Cars & Automotive Accessories - Kenwood - DPX-510
Skoda - Auto - skoda-karoq-2017-instruktionsbog-110435
Grills & Accessories - Blue Rhino - Blue Rhino WAD996SP
Video Cameras, Camcorders, & Accessories - Canon - ZR900 Camcorder
Skoda - Auto - skoda-karoq-2017-uzivatelska-prirucka-110455
Skoda - Auto - skoda-karoq-2017-110432
Cameras & Accessories - Nikon - Nikon COOLPIX S203
1981-1995--Chrysler--Lebaron--4 Cylinders D 2.6L 2BL SOHC--31218102
Skoda - Auto - skoda-karoq-2017-kezelesi-utmutato-110443
1981-1995--Chrysler--Lebaron--4 Cylinders B 2.2L 2BL SOHC--31218101
Skoda - Auto - skoda-karoq-2017-manuale-del-proprietario-110445
Skoda - Auto - skoda-karoq-2017-omaniku-kasiraamat-110436
Printers & Accessories - Xerox - WorkCentre Pro C2128~C2636~C3545
Cars & Automotive Accessories - Ford - F-150 2001
Skoda - Auto - skoda-karoq-2017-110459
Speaker Systems - JBL - Xtreme
1981-1995--Chrysler--Lebaron--4 Cylinders D 2.2L TBI SOHC--31034802
1981-1995--Chrysler--Lebaron--4 Cylinders D 2.2L TBI SOHC--31095601
Skoda - Auto - skoda-karoq-2017-owner-s-manual-110437
1981-1995--Chrysler--Lebaron--4 Cylinders J 2.5L MFI Turbo SOHC--31006702
Speakers & Audio Accessories - Dual - Dual - SX652 ~ SX692
Power Tools & Accessories - STIHL - STIHL Trimmer FS 40, FS 50
Sewing Machine - Brother - Brother BAS-511
Skoda - Auto - skoda-karoq-2017-vodic-za-korisnike-110442
Sewing Machine - Brother - Brother DB2-B798
Ducati - Motorcycle - Ducati_M620_ie_Parts_2002
Printers & Accessories - Epson - Stylus Pro 9000
DJ Equipment - Kramer AV - VM-4HDT
Printers & Accessories - Epson - WorkForce 40
Summary of Content
CD AUTO CHANGER DCM-390/290 DCM-27 OPERATING INSTRUCTIONS MODE D’EMPLOI INSTRUCCIONES DE FUNCIONAMIENTO ENGLISH FRANCAIS ESPAÑOL n SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: 9. 10. 11. 12. 13. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THIS PRODUCT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. n Laser Class (IEC 60825-1:2001) $-"44 -"4&3 130%6$5 n Copyrights / Droits d’auteur / Derechos de Autor • It is prohibited by law to reproduce, broadcast, rent or play discs in public without the consent of the copyright holder. • La reproduction, la diffusion, la location, le prêt ou la lecture publique de ces disques sont interdits sans le consentement du détenteur des droits d’auteur. • De acuerdo con las leyes está prohibido reproducir, emitir, alquilar o interpretar discos en público sin la autorización del propietario de los derechos de autor. I 1. 2. 3. 4. 5. 6. 7. 8. IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. 16. Please keep the unit in a good ventilation environment. 17. The main plug is used as the disconnect device, the disconnect device shall be readily operable. 18. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION: • The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc. • No naked flame sources, such as lighted candles, should be placed on the unit. • Observe and follow local regulations regarding battery disposal. • Do not expose the unit to dripping or splashing fluids. • Do not place objects filled with liquids, such as vases, on the unit. ATTENTION: • La ventilation ne doit pas être gênée en recouvrant les ouvertures de la ventilation avec des objets tels que journaux, rideaux, tissus, etc. • Aucune flamme nue, par exemple une bougie, ne doit être placée sur l’appareil. • Veillez à respecter les lois en vigueur lorsque vous jetez les piles usagées. • L’appareil ne doit pas être exposé à l’eau ou à l’humidité. • Ne pas poser d’objet contenant du liquide, par exemple un vase, sur l’appareil. PRECAUCIÓN: • La ventilación no debe quedar obstruida por haberse cubierto las aperturas con objetos como periódicos, manteles, cortinas, etc. • No debe colocarse sobre el aparato ninguna fuente inflamable sin protección, como velas encendidas. • A la hora de deshacerse de las pilas, respete la normativa para el cuidado del medio ambiente. • No exponer el aparato al goteo o salpicaduras cuando se utilice. • No colocar sobre el aparato objetos llenos de líquido, como jarros. CAUTION: To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user. PRECAUTION: Pour déconnecter complètement ce produit du courant secteur, débranchez la prise de la prise murale. La prise secteur est utilisée pour couper complètement l’alimentation de l’appareil et l’utilisateur doit pouvoir y accéder facilement. PRECAUCIÓN: Para desconectar completamente este producto de la alimentación eléctrica, desconecte el enchufe del enchufe de la pared. El enchufe de la alimentación eléctrica se utiliza para interrumpir por completo el suministro de alimentación eléctrica a la unidad y debe de encontrarse en un lugar al que el usuario tenga fácil acceso. ESPAÑOL FRANCAIS ENGLISH FCC INFORMATION (For US customers) 1. PRODUCT This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation. n NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO 2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product. 3. NOTE This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the product into an outlet on a circuit different from that to which the receiver is connected. • Consult the local retailer authorized to distribute this type of product or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Eviter des températures élevées. Tenir compte d’une dispersion de chaleur suffisante lors de l’installation sur une étagère. • Evite altas temperaturas. Permite la suficiente dispersión del calor cuando está instalado en la consola. • Do not let foreign objects into the unit. • Ne pas laisser des objets étrangers dans • Keep the unit free from moisture, water, l’appareil. and dust. • No deje objetos extraños dentro del • Protéger l’appareil contre l’humidité, l’eau equipo. et la poussière. • Mantenga el equipo libre de humedad, agua y polvo. • Do not let insecticides, benzene, and thinner come in contact with the unit. • Unplug the power cord when not using the • Ne pas mettre en contact des insecticides, du benzène et un diluant avec l’appareil. unit for long periods of time. • Débrancher le cordon d’alimentation • No permita el contacto de insecticidas, gasolina y diluyentes con el equipo. lorsque l’appareil n’est pas utilisé pendant de longues périodes. • Desconecte el cordón de energía cuando no utilice el equipo por mucho tiempo. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Manipuler le cordon d’alimentation avec précaution. Tenir la prise lors du débranchement du * (For apparatuses with ventilation holes) cordon. • Maneje el cordón de energía con cuidado. Sostenga el enchufe cuando desconecte el cordón de energía. • Do not obstruct the ventilation holes. • Ne pas obstruer les trous d’aération. • No obstruya los orificios de ventilación. • Never disassemble or modify the unit in any way. • Ne jamais démonter ou modifier l’appareil d’une manière ou d’une autre. • Nunca desarme o modifique el equipo de ninguna manera. II ENGLISH Getting Started Before using Getting Started Thank you for purchasing this DENON CD Player. Please read the operation instructions thoroughly in order to acquaint yourself with the CD player and achieve maximum satisfaction from it. Be sure to keep these instructions for future reference, should any questions or problems arise. Contents Getting Started Operation Accessories······················································································1 Before using ················································································1, 2 About discs Discs usable on this set ·································································2 Before playing MP3 or WMA (Windows Media® Audio) files ······2 Holding discs··················································································2 Loading discs ·················································································2 Cautions on loading discs ······························································3 Cautions on handling······································································3 Cautions on storing discs·······························································3 Cleaning discs ················································································3 About the remote control unit Inserting the batteries ····································································3 Operating range of the remote control unit ···································3 Part names and functions Front panel ·····················································································4 Display····························································································4 Rear panel ······················································································5 Remote control unit ·······································································5 Turning the power on·····································································7 Opening and closing the drawer and loading a disc ··················7 Starting playback············································································8 To stop playback·············································································8 Various playback functions Playing the desired disc and desired track [Direct play] ················8 To move to the next disc during playback ·····································8 To pause playback ··········································································8 Automatic search ···········································································8 Manual search················································································9 Programmed play ···········································································9 Random play ················································································10 Repeat play ··················································································10 Other functions ············································································10 Connections Cable indications ············································································6 Analog connections········································································6 Digital connections·········································································6 Connecting the power supply cord ··············································6 Troubleshooting············································································11 Specifications ················································································12 Accessories Check that the following parts are attached in addition to the main unit: q Operating instructions .............................................................1 w Service station list....................................................................1 e Remote control unit (RC-1033) ................................................1 r R03/AAA batteries ...................................................................2 t Pin-plug cable (Cable length: Approx. 39-3/8 ft 1 m) ...............1 y Power supply cord (Cable length: Approx. 78-47/64 ft 2 m) ...1 e r t 1 ENGLISH y • Remove two shipping screws. At the bottom of the player there are two red shipping screws for use when the player is transported. Before using the player, turn these screws counterclockwise and remove them. If the shipping screws are still in place and the power is turned on, the disc tray will not open. If this happens, turn off the power, unplug the power supply cord from the power outlet and remove the shipping screws. Retain these screws as they will be needed when the player is transported. Before transporting the player, take out the discs, close the disc tray, turn off the power after “0 000 00:00” is displayed and unplug the power supply cord from the power outlet. Then install the shipping screws by turning them clockwise. Be sure to fasten them securely. • Handle the power supply cord carefully. Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When disconnecting the power supply cord from the wall outlet, hold the plug and do not pull on the cable. • Do not open the top cover. In order to prevent electric shock, do not open the top cover. If problems occur, contact your DENON dealer. • Do not place anything inside. Prevent metal objects from entering the CD player and avoid spilling liquids on it. Electric shock or malfunction may result. • Cautions on moving. First, if a disc is loaded, eject it, then turn off the power, unplug the power supply cord from the power outlet and disconnect the connection cables with other devices. • Cautions on using mobile phones. Using a mobile phone near this unit may result in noise. If so, move the mobile phone away from this unit when using it. • Store these instructions in a safe place. After reading, store this instructions along with the warranty card in a safe place. • Note that the illustrations in these instructions may differ from the actual unit for explanation purposes. ENGLISH Getting Started NOTE: • This CD player uses a semiconductor laser. To ensure stable operation, it is recommended to use the set indoors at a temperature of 5°C (41°F) ~ 35°C (95°F). About discs Discs usable on this set q Music CDs Discs with the mark at the right can be used on this set. Note however that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played. Do not attempt to play them, as doing so could damage the set. w CD-R/CD-RW • Some discs and some recording formats may not be playable. • Non-finalized discs cannot be played. Finalization: Finalization is the process that makes recorded CD-R/CD-RW discs playable on compatible players. Getting Started Before playing MP3 or WMA (Windows Media® Audio) files There are many music distribution sites on the Internet allowing you to download music files in MP3 or WMA format. The music (files) downloaded from such sites can be stored on CD-R or CD-RW discs and played on the this CD player. “Windows Media” and “Windows” are registered trademarks or trademarks in the United States and other countries of the Microsoft Corporation of the United States. According to copyright laws, recordings you have made should only be used for your personal enjoyment and must not be used in other ways without the consent of the copyright holder. NOTE: • Multisession and CD-R/CD-RW discs that have not been completely written can be played, but we recommend using discs closed after a maximum of 10 sessions or discs that have been completed. • The maximum number of files and folders playable is 512 (total of the number of folders and files). The maximum number of folders is 256. • Copyright-protected WMA files cannot be played. (“– – : – –” is displayed. Use the 8/6 or 7/9 button on the main unit (the 8 or 9 button on the remote control unit) to select a different file.) Holding discs NOTE: • This CD player is compatible with “MPEG-1 Audio Layer-3” standards (sampling frequency of 44.1 and 48 kHz). It is not compatible with “MPEG-2 Audio Layer-3”, “MPEG-2.5 Audio Layer-3”, MP1 or MP2 standards. • The signals are output with a sampling frequency of 44.1 kHz. • When writing MP3 files on a CD-R or CD-RW disc, set the writing software’s format to “ISO9660 Level 1”. The files may not play properly if they are recorded in other formats. Also note that with some writing software it is not possible to record in ISO9660 format. If so, use a different program allowing you to record in ISO9660 format. • With MP3 files, the higher the bit rate, the better the sound quality. The compatible bit rate range is 32 to 320 kbps for MP3 files, 64 to 160 kbps for WMA files. We recommend using MP3 files with bit rates of 128 kbps or greater on the this CD player. • Be sure to add the extensions “.MP3” or “.WMA” to MP3 or WMA files, respectively. Files with extensions other than “.MP3” or “.WMA” or files without extensions cannot be played. (On Macintosh computers, MP3 files can be played by giving the extension “.MP3” after the file name consisting up a maximum of 8 alphanumeric characters and storing the files on a CD-R or CD-RW disc.) • This CD player is not compatible with packet write software or playlists. • The time may not be displayed properly when searching or pausing during variable bit rate playback. • The time display cannot be switched “TOTAL REMAIN” using the TIME button on the remote control unit. Do not touch the signal surface. Loading discs • Set the disc with the labeled side facing up. • Make sure the disc tray is fully open when inserting the disc. • Place the discs flatly, 12 cm discs in the outer tray guide (Figure 1), 8 cm discs in the inner tray guide (Figure 2). Figure 1 Figure 2 Outer tray guide 12 cm discs Inner tray guide 8 cm discs • Place 8 cm discs in the inner tray guide without using an adapter. • “0 000 00:00” is displayed if no disc is loaded, if a disc that cannot be played is loaded or if the disc is loaded upside-down. 2 ENGLISH ENGLISH Getting Started Cautions on loading discs • Only load one disc per tray at a time. Loading two or more discs per tray can damage the set or scratch the discs. • Do not use cracked or warped discs or discs that have been repaired with adhesive, etc. • Do not use discs on which the sticky part of cellophane tape or labels is exposed or on which there are traces of where labels have been removed. Such discs could get caught inside the player and damage it. Getting Started Cleaning discs • If there are fingerprints or dirt on discs, wipe them off before using the disc. If not the sound quality could be reduced and the sound may be broken. • Use a commercially available disc cleaning set or a soft cloth to clean discs. Cautions on handling • Do not get fingerprints, oil or dirt on discs. • Take special care not to scratch discs when removing them from their cases. • Do not bend or heat discs. • Do not enlarge the hole at the center. • Do not write on the labeled (printed) surface with ball-point pens, pencils, etc., or stick new labels on discs. • Water droplets may form on discs if they are moved suddenly from a cold place (outdoors for example) to a warm place, but do not try to dry them off using a hairdryer, etc. Notes on batteries: • Replace the batteries with new ones if the set does not operate even when the remote control unit is operated nearby the unit. (The attached batteries are only for verifying operation.) • When inserting the batteries, be sure to do so in the proper direction, following the “<” and “>” marks in the battery compartment. • To prevent damage or leakage of battery fluid: • Do not use a new battery together with an old one. • Do not use two different types of batteries. • Do not short-circuit, disassemble, heat or dispose of batteries in flames. • If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries. • Remove the batteries from the remote if it will not be in use for long periods. Do not wipe with a circular motion. Gently wipe the disc from the inside towards the outside. NOTE: • Do not use record spray, antistatic agents, or benzene, thinner or other solvents. About the remote control unit Operating range of the remote control unit • Point the remote control unit at the remote sensor when operating it. • The remote control unit can be used from a distance of up to about 8 meters, at a horizontal angle of up to 30° with respect to the sensor. Cautions on storing discs • Be sure to remove discs after using them. • Be sure to store discs in their cases to protect them from dust, scratches, warping, etc. • Do not store discs in the following places: 1. Places exposed to direct sunlight for long periods of time 2. Dusty or humid places 3. Places exposed to heat from heating appliances, etc. Inserting the batteries q Remove the remote control w Set two R03/AAA batteries in the battery compartment in unit’s rear cover. the indicated direction. 30° 30° Approx. 8 m e Put the rear cover back on. NOTE: • It may be difficult to operate the remote control unit if the remote sensor is exposed to direct sunlight or strong artificial light. 3 ENGLISH ENGLISH Getting Started Getting Started Part names and functions For buttons not explained here, see the page indicated in parentheses ( ). Front panel DCM-390 q w e r t y u i o !0 !1 DISC SKIP button !3 Loading Drawer Each time this button is pressed, the carousel will rotate in a clockwise direction to the next tray position. This allows for loading or unloading of discs. This button is also used to select the next disc, in the normal play continuously. !2 OPEN/CLOSE button (5) • Press this button when opening. • The drawer is opened toward the front. • Press the button again to close the drawer. Discs can be loaded and unloaded when this drawer is open. Do not force the drawer closed by hand. !4 PHONES jack For private listening, you can connect your headphones (commercially available)to this jack. !5 Disc Trays (1 ~ 5) One disc per tray can be loaded. Display q !4 !3 we r t !2 !1 y Automatic/Manual Search Reverse button !5 q POWER switch • Press once to turn the power on. w Remote control sensor This sensor receives the infrared light transmitted from the wireless remote control unit. e Display r REPEAT button Press this button for repeated playback. The “REPEAT” indicator appears on the display. Three types of repeat modes are available.( page 10) t RANDOM button Press this button to begin random play. (8/6) • Press this button to return the pickup to the beginning of the present track. Press again to return to other tracks. • Keep on pressing this button for more than 0.5 seconds during playback for fast reverse search. !0 q Disc indicator w Play indicator e Pause indicator r Playing disc indicator u Automatic/Manual Search Forward button (7/9) • Press this button to move the pickup forward to the beginning of the next track. Press again to move ahead to other tracks. • Keep on pressing this button for more than 0.5 seconds during playback for fast forward search. • HDCD indicator (DCM-390 only) t Playing mode indicator i Stop button (2) o i u y y 20-track music calender u Time indicator i Time display mode indicator o Track number indicator !0 Remote control signal receive indicator ®, HDCD®, High Definition Compatible Digital® and Microsoft® are either registered trademarks or trademarks of Microsoft Corporation, Inc. in the United States and/or other countries. HDCD system manufactured under license from Microsoft Corporation, Inc. This product is covered by one or more of the following: In the USA: 5,479,168, 5,638,074, 5,640,161, 5,808,574, 5,838,274, 5,854,600, 5,864,311, 5,872,531, and in Australia: 669114. Other patents pending. • “Windows Media®”, “Windows®”are a trademarks of Microsoft Corporation, Inc. • Press this button to stop playback. o Pause button (3) Press this button to stop play temporarily. !0 Play button (1 PLAY) Press this button to play a disc. 4 ENGLISH ENGLISH Getting Started Getting Started Rear panel Remote control unit DCM-390 only q w u er t y q RS-232C terminal (DCM-390 only) This is a terminal for future system expansion. w LINE OUT terminal Connect these to the amplifier’s input terminal. e REMOTE CONTROL jack (ROOM TO ROOM IN) This is the input connector for wired remote control. Consult your DENON dealer if you wish to use this connector. r REMOTE CONTROL jack (ROOM TO ROOM OUT) This is the output connector for wired remote control. Consult your DENON dealer if you wish to use this connector. t COAXIAL terminal This terminal outputs digital data. Connect using a 75 Ω/ohms coaxial cable (commercially available) intended for digital audio connections. y OPTICAL terminal Digital data is output in optical form from this terminal. Connect using an optical fiber cable (commercially available). Number buttons (0 ~ 9, +10) ····················(8, 9) OPEN/CLOSE button DIRECT button CLEAR button ···············································(9) ···············································(9) PROGRAM button CALL button ···············································(9) ···············································(9) DISC SELECT button ···············································(8) DISC SKIP (+/–) buttons ··········································(7, 8) RANDOM button A-B button ············································(10) ············································(10) REPEAT button TIME button ·················(2, 5) Switches the time display ············································(10) u AC inlet DISPLAY button Connect to an AC power supply using the included power supply cord. ··········································(7, 8) ············································(10) Pause button (3) Elapsed time of currently playing track Remaining time of currently playing track ···············································(8) Remaining time of all remaining tracks Skip buttons (8, 9) ························(8) Play button (1) Search buttons (6, 7) ··························(9) ···································(8, 9, 10) Stop button (2) ··········································(7, 8) • If the automatic search forward button (9), automatic search reverse button (8) or +10 button are held in, the function of these button will be repeated. 5 ENGLISH ENGLISH Connections Digital connections Connections NOTE: • Do not plug in the power supply cord until all connections have been completed. • When making connections, also refer to the operating instructions of the other components. • Be sure to connect the left and right channels properly (left with left, right with right). • Making connections with the power turned on could result in noise or damage the speakers. • Bunching the power supply cords and connection cables together could result in humming or noise. CD recorder etc. B COAXIAL IN C OPTICAL IN Cable indications Connect using the connection cables shown below. Audio cable A Signal direction (White) L (Red) R • Digital signals are output from optical terminal and coaxial terminal with parallel. Audio signal Analog connections (Stereo) ¢ When connecting the OPTICAL digital output connector with an optical transmission cable (commercially available) L R OUT IN Pin-plug cable B Digital connections (Coaxial) Protective cap (Orange) Remove the protective cap, match the shapes then insert firmly all the way in. Coaxial cable (75 Ω/ohms pin-plug cable) C Match the shapes • Store the protective cap in a safe place so as not to lose it, and use it when not using the terminal. Digital connections (Optical) Connecting the power supply cord Optical fiber cable AC outlet Analog connections AC 120 V, 60 Hz Use the included pin-plug cable to connect the left (L) and right (R) output terminal (LINE OUT) of the CD Player to the CD, AUX or TAPE PLAY left (L) and right (R) input terminal of the amplifier. NOTE: • Insert the plugs securely. Incomplete connections will result in the generation of noise. • Do not unplug the power supply cord while the set is operating. Stereo amplifier A AUDIO IN L L L R R R 6 ENGLISH ENGLISH Operation Operation Turning the power on <7/9> 3 <8/6> 2 1 Press . ¢ To turn off the power: Press again. NOTE: • To turn off the power while a disc is playing, be sure to press 2 to stop playback before turning off the power. 5 NOTE: • The player will not operate properly and the disc may even be damaged if it is not set correctly. • If your finger should get caught in the drawer when it closes, press 5. • Do not place any foreign objects on the disc tray, and do not place more than one disc on the tray at a time. Otherwise malfunction may occur. • Do not push in the disc tray manually when the power is off as this may cause malfunction and damage the CD player. • Do not touch the carousel while it is turning. Also, do not turn the carousel by hand when it is stopped. Doing so could damage it. • Do not insert disc where indicated by arrow. This could damage the internal mechanism in the unit. DISC SKIP 5 Opening and closing the drawer and loading a disc LABEL SIDE UP WARD 1 Press 5. [NUMBER] (0~9, +10) • Make sure the drawer is completely open. Hold the disc by the edges and place it on the disc tray. (Do not touch the signal surface, i.e., the glossy side.) [DISC SELECT] DISC SKIP 3 1 [8] 2 Set the disc properly in the tray according to its size. • Set 8 cm discs in the center hole. • Set 12 cm discs in the outer hole. [9] 2 3 Press DISC SKIP. The carousel turns and a disc can be loaded in the another disc tray. When the drawer is opened during the play mode, it is possible to load and unload discs in all of the disc trays other than the one whose disc is currently playing. 4 Press 5 again. About the button names in this explanation < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only : Buttons on the main unit and remote control unit 7 ENGLISH ENGLISH Operation Operation Starting playback Various playback functions Press 1. Playing the desired disc and desired track [Direct play] • The drawer closes and the disc just loaded is played. • Playback starts. If 5 is pressed while a disc is playing, playback continues, but the drawer opens and four discs can be replaced. The disc that can be replaced switches when DISC SKIP is pressed. Playback stops automatically after the last track on the disc has been played. To stop playback Press 2 during playback. To pause playback Use this function to stop playback temporarily, and later resume playback from that point. Press 3 during playback. 1 Press [DISC SELECT]. 2 Use [NUMBER] (1 to 5) to select the disc. 3 Use [NUMBER] (0 ~ 9, +10) to select the track. Example: To play the 4th track on the 3rd disc: Press [DISC SELECT] [3] [4]. Example: To play the 12th track on the 5th disc: Press [DISC SELECT] [5] [+10] [2]. • Playback pauses. ¢ To resume playback: Press 1. Automatic search ¢ Moving ahead to the beginning of the next track (file): • Playback stops. begins from the number of the disc and 4 Playback track selected. To move to the next disc during playback 1 Press DISC SKIP. The carousel in the drawer turns and the disc on the next tray is played. 1st disc 2nd disc 5th disc 3rd disc 4th disc • When [DISC SKIP–] on the remote control unit is pressed, the carousel turns in the opposite direction and the previous disc is played. 8 ENGLISH Press [9] or <7/9> during playback. • The pickup will advance to the beginning of the next track and playback will continue. Pressing the button several times will forward the pickup the corresponding number tracks. Normal playback resumes when you release your finger from the button. ¢ Moving back to the beginning of the current track (file): Press [8] or <8/6> during playback. • The pickup will advance to the beginning of the next track and playback will continue. Pressing the button several times will forward the pickup the corresponding number tracks. ENGLISH Operation Operation Manual search <7/9> < 8 /6 > 1 Programmed play Use this function to skip forward or backward while listening to the sound. You can play certain tracks on the loaded discs in any order. Up to 32 tracks can be set in a program. ¢ Searching forward: 1 Press [PROGRAM]. • The “PROGRAM” indicator lights. Press [7] or press and hold <7/9> during playback. • “ ”is displayed if the end of the last track is reached during manual searching. If this happens, use [6] or <8/6> to turn the display off. REPEAT RANDOM 5 ¢ Searching backward: 5 [NUMBER] (0~9, +10) [DIRECT] [DISC SELECT] RANDOM [DISPLAY] [CLEAR] [CALL] [PROGRAM] [A-B] REPEAT Example: To program the 3rd track on the 2nd disc and the 12 track on the 5th disc: Press [PROGRAM] [DISC SELECT] [2] [3], [DISC SELECT] [5] [+10] [2]. Press [6] or press and hold <8/6> during playback. 3 Press 1. •“ ” is displayed if the beginning of the first track is reached during manual searching. If this happens, use [7 ] or <7/9> to turn the display off. ¢ Checking the programmed tracks: NOTE: • The sound may be interrupted momentarily when resuming normal playback from the manual search mode. This is not a malfunction. 1 [6] [DISC SELECT], [NUMBER] to select the disc to 2 Press be programmed. [7] • The tracks are played in the programmed order. Press [CALL]. The tracks are displayed in the programmed order each time the button is pressed. ¢ Clearing tracks from the program: The last track in the program is deleted each time the [CLEAR] is pressed. ¢ Stopping programmed playback: Press [DIRECT] or press 5 to open the disc tray. • Tracks on a disc not loaded can also be programmed, but if you try to play that disc, the microprocessor detects that it is not loaded and the following disc is played automatically. • When programming, do not program a track number which is not recorded on the disc. If such a number is programmed by mistake, the player ignore the program. • For programmed playback, the remaining time for the program is only displayed when the programmed tracks are all on the same disc. “– – : – –” is displayed when tracks on more than one disc are programmed. • In the case that the total playing time of programmed tracks becomes more than 99:59, “– – : – –” is displayed. About the button names in this explanation < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only : Buttons on the main unit and remote control unit 9 ENGLISH ENGLISH Operation Random play Use this function to play all the tracks on the all discs or a disc once in random order. Operation ¢ A-B repeat play: Repeat play playback, press [A-B] at the point at which 1 During you want to start repeating (point A). 1 Press REPEAT once. • The “A-B” indicator blinks. ¢ Full Random Play: One-track Repeat 1 Press RANDOM. • The “RANDOM” indicator lights. 2 Press 1. • A track is selected automatically and playback starts. During programmed playback: The programmed tracks are played in random order. During repeat playback: The tracks are played once in random order, then played again in a different order, and this is repeated. • The “REPEAT 1” indicator lights. • The track currently playing is repeated. playback, press [A-B] at the point at which 2 During you want to stop repeating (point B). • The “A-B” indicator lights and the A-B section is played repeatedly. One-disc Repeat • The “REPEAT 1DISC” indicator lights. • The disc currently playing is repeated. ¢ Stopping A-B repeat playback: Press [A-B] again. All-disc Repeat • The “REPEAT DISC” indicator lights. • All the discs currently loaded are repeated. OFF ¢ Stopping random playback: • The pickup will now return to the starting point and repeat playback of the selected interval. • A-B repeat playback is not possible during programmed playback or random playback. Press RANDOM or [DIRECT]. NOTE: • During random play, the player may display the number of disc which is not loaded in the tray. In such a case, the player will read the disc information, then reset automatically to correct. This is not a malfunction. ¢ Disc Sequential Random Play: RANDOM and specify the disc numbers (1 to 5) 1 Press with the [DISC SELECT] and the [NUMBER]. 2 Press 1. Other functions During regular playback: All the tracks are played repeatedly. During programmed playback: The tracks are played repeatedly in the programmed order. In the random play mode: The tracks are played once each in random order, then played again in a different order. ¢ Stopping all-track repeat playback: Press REPEAT twice in a row or press 5 to open the disc tray. 2 Press 1. • A track is selected automatically and playback starts. • In the programmed play or random play mode during all-track repeat playback, normal playback resumes when REPEAT is pressed once. 10 ENGLISH ¢ Switching the display brigntness: The brightness can be switched in three steps or turned off. Press [DISPLAY]. ENGLISH Troubleshooting Troubleshooting If a problem should arise, first check the following. 1. Are the connections correct? 2. Have you operated the player according to the Operating Instructions? If this unit is not operating properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. Disconnect the power immediately and contact your store of purchase. Symptom Cause Measures Page Disc tray does not open. • The power is not on. • Turn on the power. “0 000 00:00” is displayed even though a disc is loaded. • The disc is not properly loaded. • Reload the disc. • The loaded disc is not a CD. • Load a CD. 2 Disc is not played when 1 button is pressed. • The disc is dirty or scratched. • Wipe the dirt off the disc or replace the disc. 3 No sound is produced or sound is distorted. • The output cables are not properly connected to the • Check the connections. amplifier. • The amplifier’s function setting or adjustments are • Check the amplifier’s function and controls and not right. adjust as necessary. 6 No digital signals are output. • The connection cables are not properly connected. • Check the connections. 6 Specific section of the disc cannot be played properly. • The disc is dirty or scratched. • Wipe the dirt off the disc or replace the disc. 3 • Program properly. 9 Programmed playback is not possible. • The tracks have not been programmed properly. 7 2, 3 – A CD-R or CD-RW disc cannot be played. • The disc has not been finalized. • Finalize the disc then play it. • The recording conditions are bad or the quality of the • Use a properly recorded disc. disc itself it poor. 2 2 Set does not operate properly when remote control unit is operated. • The batteries are spent. • The remote control unit is too far from the set. 3 3 • Replace the batteries with new ones. • Move the remote control unit closer to the set. “– – : – –” is displayed when playing • You have selected a copyright-protected WMA file • Use the 8/6 or 7/9 button on the main files recorded in MP3 or WMA format. or a file that cannot be played normally. unit (the 8 or 9 button on the remote control unit) to select a different file. 11 ENGLISH 2 ENGLISH Specifications Specifications ¢ Audio performance DCM-390 • Analog output Channels: Playable frequency range: S/N: Dynamic range: Harmonic distortion: Separation: Wow & flutter: Output level: Signal type: Sampling frequency: Usable discs: 2 channels 2 Hz ~ 20 kHz 112 dB 100 dB 0.0027 % (1 kHz) 098 dB Less than the measuring Fix 2.0 V (10 kΩ/kohms) 16-bit linear PCM 44.1 kHz Audio compact discs are used 12 cm (5 inch) and 8 cm (3 inch) • Digital output Coaxial: OPTICAL: Light emission wavelength: 0.5 Vp-p (75 Ω/ohms) – 15 ~ – 21 dBm 660 nm • Phones output 0.04mW DCM-290/27 108 dB 098 dB 0.003 % 098 dB ¢ General Power supply: Power consumption: Maximum external dimensions: Mass: AC 120 V, 60 Hz 15 W 434 (W) x 120 (H) x 400 (D) mm (17-3/32” x 4-3/4” x 15-3/4”) (including protruding parts) 6.3 kg (13.1 lbs.) ¢ Remote control unit (RC-1033) Remote control type: Batteries: External dimensions: Mass: Infrared pulse R03/AAA Type (two batteries) 49 (W) x 220 (H) x 21 (D) mm (1-15/16” x 8-11/16” x 7/8”) 106 g (0.23 lbs.) (included batteries) * For purposes of improvement, specifications and design are subject to change without notice. 12 ENGLISH www.denon.com D&M Holdings Inc. Printed in China 00D 511 4437 302