Get notified when we add a new AroSpartana Manual

We cover 60 Aro vehicles, were you looking for one of these?

Skoda - Auto - skoda-karoq-2017-110444
Skoda - Auto - skoda-karoq-2017-brukerhandbok-110449
Cars & Automotive Accessories - Kenwood - C929
Toys & Accessories - Lego - DUPLO Town - AROUND THE WORLD - 10805
Skoda - Auto - skoda-karoq-2017-savininko-vadovas-110446
Skoda - Auto - skoda-karoq-2017-manual-del-propietario-110438
Skoda - Auto - skoda-karoq-2017-110460
Skoda - Auto - skoda-karoq-2017-navod-k-obsluze-110433
Skoda - Auto - skoda-karoq-2017-omistajan-kasikirja-110439
Skoda - Auto - skoda-karoq-2017-110457
VCRs & Accessories - Hitachi Electronics - VTM171A
Skoda - Auto - skoda-karoq-2017-110431
Skoda - Auto - skoda-karoq-2017-kullan-m-k-lavuzu-110458
1981-1995--Chrysler--Lebaron--4 Cylinders C 2.2L FI Turbo SOHC--31006701
1981-1995--Chrysler--Lebaron--4 Cylinders J 2.5L MFI Turbo SOHC--31034803
Skoda - Auto - skoda-karoq-2017-110441
Skoda - Auto - skoda-karoq-2017-prirocnik-za-lastnika-110456
1981-1995--Chrysler--Lebaron--4 Cylinders J 2.5L MFI Turbo SOHC--31006702
Barossa - Motorcycle - Barossa__Barossa_PYTHON_100cc_parts_5d8a7f921c3648a62136367
Pool Equipment - Haywood-Pool - Super Pump~All Super Pump Models
Skoda - Auto - skoda-karoq-2017-uzivatelska-prirucka-110455
Skoda - Auto - skoda-karoq-2017-instrukcja-obslugi-110450
Skoda - Auto - skoda-karoq-2017-110453
Barossa - Motorcycle - Barossa_PYTHON_100cc_parts
Skoda - Auto - skoda-karoq-2017-ipasnieka-rokasgramata-110447
Skoda - Auto - skoda-karoq-2017-omaniku-kasiraamat-110436
Skoda - Auto - skoda-karoq-2017-manuale-del-proprietario-110445
Sewing Machine - Singer - 14T968DC %7C PROFESSIONAL 5
Skoda - Auto - skoda-karoq-2017-manuel-du-proprietaire-110440
1981-1995--Chrysler--Lebaron--4 Cylinders D 2.2L TBI SOHC--31095601
1981-1995--Chrysler--Lebaron--4 Cylinders D 2.6L 2BL SOHC--31218102
Skoda - Auto - skoda-karoq-2017-handleiding-110448
1981-1995--Chrysler--Lebaron--4 Cylinders B 2.2L 2BL SOHC--31218101
Skoda - Auto - skoda-karoq-2017-agarmanual-110454
Furniture & Storage - Blue Rhino - GAD1375SP
Skoda - Auto - skoda-karoq-2017-kezelesi-utmutato-110443
Skoda - Auto - skoda-karoq-2017-110459
Barossa - Motorcycle - Barossa__Barossa_PYTHON_100cc_parts
Skoda - Auto - skoda-karoq-2017-110432
Skoda - Auto - skoda-karoq-2017-manualul-de-utilizare-110452
Speakers & Audio Accessories - Dual - Dual - SX652 ~ SX692
Skoda - Auto - skoda-karoq-2017-instruktionsbog-110435
Skoda - Auto - skoda-karoq-2017-vodic-za-korisnike-110442
Grills & Accessories - Blue Rhino - Blue Rhino WAD996SP
Printers & Accessories - Xerox - WorkCentre Pro C2128~C2636~C3545
1981-1995--Chrysler--Lebaron--4 Cylinders D 2.2L TBI SOHC--31034802
Cars & Automotive Accessories - Kenwood - DPX-510
Skoda - Auto - skoda-karoq-2017-owner-s-manual-110437
Sewing Machine - Brother - Brother BAS-511
Video Cameras, Camcorders, & Accessories - Canon - ZR900 Camcorder
Speaker Systems - JBL - Xtreme
Cars & Automotive Accessories - Ford - F-150 2001
Ducati - Motorcycle - Ducati_M620_ie_Parts_2002
Cameras & Accessories - Nikon - Nikon COOLPIX S203
Skoda - Auto - skoda-karoq-2017-manual-do-proprietario-110451
Sewing Machine - Brother - Brother DB2-B798
Printers & Accessories - Epson - Stylus Pro 9000
DJ Equipment - Kramer AV - VM-4HDT
Power Tools & Accessories - STIHL - STIHL Trimmer FS 40, FS 50
Printers & Accessories - Epson - WorkForce 40
Summary of Content
Block Diagram BUS ASSIGNMENT BUS A BUS B 600/10K TBL1S Transformer Balanced Line Input Module GATE ENABLE/ DISABLE Input Wiring Balanced Connection Use this wiring when the source equipment supplies a balanced, 3-wire output signal. Connect the shield wire of the source signal to the “G” terminal of the input. If the “+” signal lead of the source can be identified, connect it to the plus “+” terminal of the input. If the source lead polarity cannot be identified, connect either of the hot leads to the plus “+” terminal. Connect the remaining lead to the minus “-” terminal of the input. Features Note: If polarity of the output signal versus the input signal is important, it may be necessary to reverse input lead connections. • Audio Gating Unbalanced Connection When the source device provides only an unbalanced output (signal and ground), the input module should be wired with the "-" input shorted to ground (G). The unbalanced signal's shield wire is connected to the input module’s ground and the signal hot wire is connected to the "+" terminal. Since unbalanced connections do not provide the same amount of noise immunity that a balanced connection does, the connection distances should be made as short as possible. 50 Spring Street, Ramsey, NJ 07446, U.S.A. 201-934-8500; Fax: 201-934-9832 www.bogen.com • Transformer-isolated line level input • Gain/Trim control • Bass and treble • Gating with threshold and duration adjustments • Variable signal ducking when muted • Fade back from mute • 4 levels of available priority • Can be muted from higher priority modules • Can mute lower priority modules • Pluggable screw terminal strip Printed in Taiwan. © 2007 Bogen Communications, Inc. 54-2084-01D 0704 Specifications subject to change without notice. Module Installation 1. 2. Turn off all power to the unit. Make all necessary jumper selections. 3. Position module in front of any desired module bay opening, making sure that the module is right-side up. 4. Slide module on to card guide rails. Make sure that both the top and bottom guides are engaged. 5. Push the module in to the bay until the faceplate contacts the unit’s chassis. 6. Use the two screws included to secure the module to the unit. WARNING: Turn off power to unit and make all jumper selections before installing module in unit. Jumper Selections Priority Level* This module can respond to 4 different levels of priority. Priority 1 is the highest priority. It mutes modules with lower priorities and is never muted. Priority 2 can be muted by Priority 1 modules and can mute modules set for Priority Level 3 or 4. Priority 3 can be muted by either Priority 1 or 2 modules and can mute Priority 4 modules. Priority 4 modules are muted by all higher priority modules. Remove all jumpers for “no mute” setting. * The number of priority levels available is determined by the amplifier the modules are used in. Gating Gating (turning off) of the modules output when insufficient audio is present at the input can be disabled. Detection of audio for the purpose of muting lower priority modules is always active regardless of this jumper setting. Bus Assignment This module can be set to operate so that the mono signal can be sent to the main unit’s A bus, B bus, or both buses. Impedance Selector This module can be set for two different input impedances. When connecting to a 600-ohm source, it is desirable to have a 600-ohm matching input impedance. For typical source equipment, use the 10k-ohm setting. Gate - Threshold (Thresh) Gate - Duration (Dur) Controls the amount of input signal level necessary to turn the module’s signal output on and mute lower priority modules. Clockwise rotation increases the necessary input signal level required to produce audio output and mute lower priority modules. Controls the amount of time the signal output and priority muting of the module remains applied to the main unit’s buses after the input signal falls below the required minimum signal level (set by the threshold control). Treble (Treb) Ducking (Duck) Controls the module’s output level when the module is muted or gated. The range is adjustable from no reduction in level to full muting of the output signal. Gain Provides control over the level of input signal that can be applied to the internal signal buses of the main unit. Allows a way to balance the input levels of various devices so that the main unit controls can be set to relatively uniform or optimum levels. The Treble control provides +/- 10 dB at 10 kHz. Clockwise rotation provides boost; counterclockwise rotation provides cut. Center position provides no effect. Bass The Bass control provides +/- 10 dB at 100 Hz. Clockwise rotation provides boost; counterclockwise rotation provides cut. Center position provides no effect. Balanced Input Transformer balanced, line-level input on pluggable screw terminal strip. Block Diagram BUS ASSIGNMENT BUS A BUS B 600/10K TBL1S Transformer Balanced Line Input Module GATE ENABLE/ DISABLE Input Wiring Balanced Connection Use this wiring when the source equipment supplies a balanced, 3-wire output signal. Connect the shield wire of the source signal to the “G” terminal of the input. If the “+” signal lead of the source can be identified, connect it to the plus “+” terminal of the input. If the source lead polarity cannot be identified, connect either of the hot leads to the plus “+” terminal. Connect the remaining lead to the minus “-” terminal of the input. Features Note: If polarity of the output signal versus the input signal is important, it may be necessary to reverse input lead connections. • Audio Gating Unbalanced Connection When the source device provides only an unbalanced output (signal and ground), the input module should be wired with the "-" input shorted to ground (G). The unbalanced signal's shield wire is connected to the input module’s ground and the signal hot wire is connected to the "+" terminal. Since unbalanced connections do not provide the same amount of noise immunity that a balanced connection does, the connection distances should be made as short as possible. 50 Spring Street, Ramsey, NJ 07446, U.S.A. 201-934-8500; Fax: 201-934-9832 www.bogen.com • Transformer-isolated line level input • Gain/Trim control • Bass and treble • Gating with threshold and duration adjustments • Variable signal ducking when muted • Fade back from mute • 4 levels of available priority • Can be muted from higher priority modules • Can mute lower priority modules • Pluggable screw terminal strip Printed in Taiwan. © 2007 Bogen Communications, Inc. 54-2084-01D 0704 Specifications subject to change without notice.