Official Software
Get notified when we add a new ACCobra Manual

We cover 60 AC vehicles, were you looking for one of these?

Toys & Accessories - Fisher-Price - Menacer - (I8031)
2006 HIACE ELECTRICAL WIRING DIAGRAM PDF (EWD622E)
1975-1988--AMC--Pacer--6 Cylinders E 3.8L 1BL OHV--31318001
Hombre S Space Cab 2WD V6-4.3L (2000)
Tracer L4-110 1.8L DOHC (1995)
1975-1988--AMC--Pacer--6 Cylinders A 4.2L 1BL OHV--31338702
Isuzu Hombre S Space Cab 2wd Workshop Manual (V6-4.3L (2000))
Ajs - Motorcycle - Ajs_1951_AJS_Instuction_and_Maintenace_16M_16MS_16MC_16MCS_18_18S_18C_18CS
Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
Isuzu Hombre Xs Space Cab 2wd Workshop Manual (L4-2.2L CPC (1999))
Isuzu Hombre Xs Space Cab 4wd Workshop Manual (V6-4.3L (1999))
Daelim - Motorcycle - daelim_citiace110
Hombre XS Space Cab 4WD V6-4.3L (1999)
Toys & Accessories - Fisher-Price - Barbie Dune Racer - (Y9367)
AC - ACE - Sales Brochure - 1957 - 1957
Hombre XS Space Cab L4-2.2L CPC (1997)
Isuzu Hombre Xs Space Cab 2wd Workshop Manual (V6-4.3L (1998))
Isuzu Hombre Xs Space Cab Workshop Manual (L4-2.2L CPC (1997))
Watches & Wearables - Timex - Ironman Race Trainer Pro HRM
Hyundai - Auto - hyundai-acera-2011-manual-del-propietario-79007
AC - Aceca - Sales Brochure - 1960 - 1960
Toyota - Liteace - Parts Catalogue - 1986 - 1986
Tracer L4-1589cc 1.6L SOHC (1989)
Citroen - Auto - citroen-spacetourer-2017-kullan-m-k-lavuzu-111013
Mitsubishi Mitsubishi Space Runner Mitsubishi Space Runner 1999 Workshop Manual
Ajs - Motorcycle - Ajs_1953_AJS_Instuction_and_Maintenace_16M_16MS_16MC_16MCS_18_18S_18C_18CS
Ajs - Motorcycle - Ajs_1954_AJS_Instuction_and_Maintenace_16M_16MS_16MC_16MCS_18_18S_18C_18CS
Lexus Lexus IS 300 Lexus IS300 2001 Misc. Document Automatic Spark Plug Replacement Procedures
Ducati - Motorcycle - Ducati_ST3_ST3SABS_Service_Frace___Dutch_2006_5d8a7f75dba066a02643504
1975-1988--AMC--Pacer--6 Cylinders E 3.8L 1BL OHV--31359801
Fireplaces, Heaters, & Accessories - Blue Rhino - Blue Rhino 92000
Mitsubishi Mitsubishi Space Star Mitsubishi Space Star 1998 Misc Documents Body Repair Manual
Ducati - Motorcycle - Ducati_ST3_ST3SABS_Service_Frace___Dutch_2006
Mitsubishi Mitsubishi Space Wagon Mitsubishi Space Wagon 1992 1997 Workshop Manual
Fireplaces, Heaters, & Accessories - Blue Rhino - Blue Rhino 200219
Hombre XS Space Cab 2WD V6-4.3L (1998)
Mitsubishi Mitsubishi Space Runner Mitsubishi Space Runner 2000 Misc.Document Service Bulletins
Derbi - Motorcycle - Derbi_Senda_X_Race_SM_2006_parts_list
Mitsubishi Mitsubishi Space Star Mitsubishi Space Star 2003 Misc. Document Electrical Wiring
Toys & Accessories - Fisher-Price - Green Dune Racer - (W2602)
Toyota - RaceRunner - Workshop Manual - 2001 - 2014
Honda - Auto - honda-grace-2014-89192
Jaguar Jaguar XK Jaguar XK 2006 Misc. Document Rear Window Regulator Replacement
Alfa Romeo Alfa Romeo Alfetta Alfa Romeo Alfetta 1982 Workshop Manual Wind Screen Replacement
Mitsubishi Mitsubishi Space Runner Mitsubishi Space Runner 2000 Misc.Document Workshop Manual Supplement
Mitsubishi - Space Star - Sales Brochure - 2013 - 2013 (2)
Mitsubishi Mitsubishi Space Gear Mitsubishi Space Gear 1997 Owners Manual
Mitsubishi Mitsubishi Space Wagon Mitsubishi Space Wagon 2000 Misc. Document Workshop Manual Supplement
Jaguar Jaguar XK Jaguar XK 2002 Misc. Document Thermostat Replacement
AC - ACE - Sales Brochure - 1953 - 1963
Toys & Accessories - Fisher-Price - Diego Lil Quad - (K4565)
Fireplaces, Heaters, & Accessories - Blue Rhino - Blue Rhino 200605
Jaguar Jaguar X-Type Jaguar X Type 2004 Misc Document Lubricate Replacement Latches
Cars & Automotive Accessories - Fleetwood RV - Pace Arrow Eleganza
Mitsubishi - Space Star - Sales Brochure - 2013 - 2013
Ajs - Motorcycle - Ajs_Big-end_replacement_instructions
Jaguar Jaguar XK Jaguar XK 2004 Misc. Document Removal and Replacement of Lower Control Arms
Hyundai - Auto - hyundai-acera-2011-manual-del-propietario-79007_5d8a7f6bcc2af1a64133102
Citroen - Auto - citroen-spacetourer-2016-instruktionsbog-97792
Harley Davidson - Motorcycle - Harley_Davidson_1961-HD-KR-XLR-Racer-Manual
Summary of Content
INDEX Line Card ................................................................................................................................... 2 Front Suspension ..................................................................................................................... 3-8 Complete kits, Control arms, Spindles, Hubs, Springs, Shocks, Sway bars, Steering boxes and Linkage Rear Suspension ...................................................................................................................... 9-13 Complete kits, Springs, Bushings, Shackles, Spring plates, Shocks, Traction devices, and Sway bars Front Brakes ............................................................................................................................. 14-19 Complete kits, Calipers, Rotors, Hats, Caliper brackets, Cooling kits, Pads, Master cylinders and Lines Rear Brakes .............................................................................................................................. 20-22 Complete kits, Drums, Shoes, Wheel cylinders, Lines, Cooling kits and Rear disc brake kits Drive Train ................................................................................................................................. 23-28 Transmissions, Shifters, Clutches, Driveshafts, Yokes, Center sections, Differentials, Axles and Housings Engines ..................................................................................................................................... 29-60 Complete engines, Internal components, Valve train, Intakes, Carburetors, Ignition, Valve covers, Breathers, Oil pans, Radiators, Water pumps, Pulleys, Headers, Exhaust systems, Fasteners, Gaskets and Seals Body Exterior ............................................................................................................................ 61-65 Front aprons, Debris screens, Hoods, Hood pin kits, Windshields, Mirrors, Fuel cells. Wheels and Tires Body Interior ............................................................................................................................. 66-69 Steering wheels, Dash kits, Gauges, Dash delete panels, Door panels, Seats, Harnesses, and Shift boots Accessories .............................................................................................................................. 70-75 Fire systems, Export braces, Monte Carlo bars, Tie-down kits, Catch cans, Batteries, Battery caps, Cable kits, Kill switches, Vintage stickers, Stripe kits, Spray paints, Lubricants, Cleaning and Detailing supplies Apparel ...................................................................................................................................... 76-78 T-shirts, Polo shirts, Caps, Long sleeve denim shirts, Twill dress shirts and jackets Company Policies and Ordering Information......................................................................... x-i Shelby GT350 R-Models For decades, Cobra Automotive has specialized in restoring and vintage racing the ultimate race version of Shelby’s GT350. Ten of the original 36 R-models have been upgraded or restored here with as many as four on the premises at one time. Historic Sports Cars and Trans-Am Cars This is 5R333 which was campaigned as an “All Out” vintage racer before we returned it to the period correct “Brown Brothers” livery depicted here. Ford GT40 P/1037 prepared and crewed by Cobra Automotive for Europe during 2008 at Le Mans, Nürburgring and Spa. sales: 203-284-3863 Cobra Automotive has years of experience developing and providing trackside support for some of the most significant vintage race cars ever campaigned. We have also built, developed and campaigned vintage Trans-Am competition cars including 1967 and 1968 Mustangs, 1970 Boss 302s and 1967 and 1970 Camaros. 1967 Camaro Trans-Am race car # 00 completely re-engineered and restored by Cobra Automotive. email: sales@cobraautomotive.com 1 www.cobraautomotive.com Rev051112 LINE CARD ACCEL IGNITION AFCO RACING PRODUCTS ALINABAL AMERICAN RACING WHEELS AMERICAN STAINLESS TUBING AMK PRODUCTS ARP FASTENERS ATI PERFORMANCE PRODUCTS ATL FUEL CELLS AUTO METER AUTOLITE AVIAID COMPETITION OIL SYSTEMS GATES GLOBAL WEST SUSPENSION GOODRIDGE USA GOODYEAR RACING GRIFFIN RADIATORS HOLLEY PERFORMANCE PRODUCTS HOLMAN MOODY HOOKER HEADERS HOOSIER TIRES HURST B&M AUTOMOTIVE BAER BRAKE SYSTEMS BHJ PRODUCTS BLP CARBURETORS BLUE THUNDER BORGSON UNIVERSAL BURNS STAINLESS INTERSTATE BATTERY ISKENDERIAN RACING CAMS JBA PERFORMANCE EXHAUST JE PISTONS JERICO PERFORMANCE PRODUCTS JESEL JME ENTERPRISES JOE GIBBS PERFORMANCE CALICO TECHNOLOGIES CALVERT RACING SUSPENSIONS CANTON RACING PRODUCTS CARTER PRODUCTS CENTERFORCE CHAMPION SPARKPLUGS CLASSIC AUTO AIR CLASSIC TUBE CLEVITE CLOYES COLEMAN MACHINE COMPETITION CAMS CRANE CAMS CROWER CAMS CURRIE ENTERPRISES CV PRODUCTS K&N FILTERS KFP MAGNUM PAD KING ENGINE BEARINGS KIRKHAM MOTORSPORTS KIRKEY RACING FABRICATION KONI LAKEWOOD LONGACRE RACING PRODUCTS LONG’S MACHINE AND TOOL LUNATI CAMS DANIEL CARPENTER MUSTANG REPRODUCTIONS DART MACHINERY DEKA BATTERIES DETROIT LOCKER DRIVE TRAIN SPECIALTIES DYNACORN INTERNATIONAL DYNOMAX PERFORMANCE EXHAUST EAGLE SPECIALTY PRODUCTS EARL’S PERFORMANCE EATON POSI EDELBROCK ENERGY SUSPENSION EXTRUDE HONE FEDERAL-MOGUL FEL-PRO GASKETS FERREA FIREBOTTLE/SAFETY SYSTEMS FLAMING RIVER FLEX-A-LITE FLOWMASTER FORD RACING FRAGOLA FUEL SAFE sales: 203-284-3863 M&R PRODUCTS MALLORY MANLEY PERFORMANCE PRODUCTS MARCH PERFORMANCE MASTER POWER BRAKES MELLING MOOG CHASSIS MOROSO PERFORMANCE PRODUCTS MOSER ENGINEERING MOTIVE GEAR MOTIVE INDUSTRIES MOTO-LITA MR. GASKET MSD IGNITION O.E.M. GLASS OLIVER RACING PARTS OPTIMA BATTERIES PSI VALVE SPRINGS PS ENGINEERING PAINLESS PERFORMANCE PRODUCTS PARKER FLUID CONNECTORS PENSKE RACING SHOCKS PERTRONIX PERFORMANCE PRODUCTS PIONEER AUTOMOTIVE PRODUCTS PORTERFIELD ENTERPRISES PRO-GRAM ENGINEERING email: sales@cobraautomotive.com 2 PROTHANE QA1 MOTORSPORTS RACE TECHNOLOGY RACING HEAD SERVICES RACING PRODUCTS MUFFLERS RARE PARTS RAYBESTOS REIDER RACING RICHMOND GEAR ROCKER ARM SPECIALIST ROLTEK RACING TRANSMISSIONS ROSS RACING PISTONS RUSSELL PERFORMANCE PRODUCTS SCAT CRANKSHAFTS SCOTT DRAKE SEALED POWER SETRAB OIL COOLERS SPICER SPIN TECH MUFFLERS SIMPSON SPA TECHNIQUE SPARCO MOTOR SPORTS STANDARD MOTOR PRODUCTS STAINLESS STEEL BRAKES STANT STEWART COMPONENTS STEWART WARNER PERFORMANCE STRANGE ENGINEERING T&D MACHINE TAYLOR/VERTEX TEX RACING ENTERPRISES TILTON TOTAL CONTROL PRODUCTS TOTAL SEAL TOTALLY STAINLESS TREND PERFORMANCE TRIGO ULTRADYNE VETTE BRAKES & PRODUCTS VHT CHEMICALS VICTORY 1 PERFORMANCE VINTAGE AIR WAGNER WEATHERHEAD WEBER CARBURETORS WILWOOD WIRE WORKS WIX FILTRATION WORLD PRODUCTS XCELDYNE TECHNOLOGIES www.cobraautomotive.com Rev051112 FRONT SUSPENSION 100-1000 1965-66 KIT PICTURED Complete COMPETITION front suspension kits We consider our front suspension kit to be the best vintage legal style system on the market today. Each component has been designed to provide the ultimate in performance and reliability under the most extreme conditions. Refer to individual listing for component description. This kit comes with the 1-1/4” hollow sway bar and 1-3/4” lowering templates. 1” templates can also be specified. Please see separate listing for details. 100-1000 1965-66 Mustang (pictured above) 100-1000-1 1967-69 Mustang excludes Boss. Excludes quick steer and roller idler 100-1000-2 1969 Boss and 1970 Mustang. Excludes quick steer and roller idler COMPETITION Control arm kits for early Mustangs 100-925 sales: 203-284-3863 Improve your front-end geometry while retaining a full range of suspension movement. Our exclusive kits feature lower control arms with inner spherical bearings, gusseted for strength and friction-free movement. With a mounting drop point from 1” to 1-3/4”, our control arms improve the camber angle and eliminate the need for a negative wedge kit. All components are welded and boxed for additional strength with quality Moog parts used throughout. 100-925 Complete kit, 1965-66, with 1-3/4” template 100-925-1 Complete kit, 1965-66, with 1” template 100-930 Complete kit, 1968-73, with 1-3/4” template 100-930-1 Complete kit, 1968-73, with 1” template 100-950 Reinforcement plates, 1965-66, with 1-3/4” template 100-950-1 Reinforcement plates, 1965-66, with 1” template 100-967 Reinforcement plates, 1967-73, with 1-3/4” template 100-967-1 Reinforcement plates, 1967-73, with 1” template 100-CA3082 Upper control arms, 1965-66 100-CA3092 Upper control arms, 1967-73 256-SPF-1 Lower control arms, 1965-66 256-SPF-3 Lower control arms, 1968-73 (Can be modified for 1967) email: sales@cobraautomotive.com 3 www.cobraautomotive.com Rev051112 FRONT SUSPENSION BIG SPINDLE KIT Similar to the heavy duty Trans-Am variation, our big front spindle kit is the next step for anyone interested in maximum reliability. Smaller stock spindles are known for failure under harsh high performance conditions. Larger bearings increase load capacity and life for competition use. Each spindle goes through a series of checks and procedures, including magna fluxing, so you can rely on its full performance. Utilizes larger 1/2” ES387 outer tie rods for additional steering linkage strength. Accepts four bolt caliper mounting bracket for four piston Kelsey-Hayes fixed calipers. Bearing and seal kit available separately. (196566 with power steering require special left hand outer tie rod and adjusting sleeve). Cast iron gray high temperature painted finish. 100-3100 Complete spindle kit as pictured 100-3103 Bearing and seal kit only 100-3102 Hardware kit only BILLET ALUMINUM RACING HUB KIT If you are converting to our 12’’ competition brakes, take it one step further with a set of these CNC machined 7075 T6 aircraft-grade aluminum hubs. They come with bearings, seals and wheel studs. The bearing races for our big spindles and the studs come already pressed in place. (Weight 3.2 lbs. each, hub and bearings only) Bare aluminum finish. (3” competition studs require hollow race style lug nuts; studs can be supplied loose and cut down for use with acorn style lug nuts). 100-7075HS Complete kit with bearings and studs pressed in 100-7075H Hubs with bearings only 100-7703 Wheel studs only, five per pack (3” competition type) BILLET STEEL RACING HUB KIT For the ultimate in strength and reliability our CNC machined 1018 steel hubs are virtually bullet proof. Like the aluminum kit above, they come with bearings, seals and wheel studs. The bearing races for our big spindles and the studs come already pressed in place. (Weight 6.2 lbs. each, hub and bearings only) Bare steel finish. (3” competition studs require hollow race style lug nuts; studs can be supplied loose and cut down for use with acorn style lug nuts). 100-HUBS-S Complete kit with bearings and studs pressed in 100-HUBS Hubs with bearings only 100-7703 Wheel studs only, five per pack (3” competition type) WHEEL BEARING PRE-LOAD SPACER KIT Cutting edge NASCAR CUP series technology for your Shelby or Mustang vintage road racer. These specially designed spacers fit solidly between the inner races of the front wheel bearings. Utilizing special shims they eliminate bearing play that can produce unwanted rotor run out which, in turn, can produce caliper piston kick back and a low brake pedal. For use with Cobra Automotive competition hubs equipped with A12 and A13 bearings, not included. Precision machined from 12L14 steel these are primarily designed for all out competition use. Bare steel finish. 100-WBS (pair) 100-WBS installed WHEEL BEARINGS, SEALS AND DUST CAPS Federal-Mogul wheel bearings and their National brand oil seals have been trusted names in the automotive replacement parts business for over 50 years. These are the same premium quality parts we run in our own cars and use in our restorations. A2 Outer wheel bearing, 1964-69 (small spindle) V8 excluding 1969 Boss A6 Inner wheel bearing, 1964-69 (small spindle) V8 excluding 1969 Boss A3 Outer wheel bearing, 1969 Boss, 1969-70 Shelby GT350 and GT500 A5 Inner wheel bearing, 1969 Boss, 1969-70 Shelby GT350 and GT500 A12 Outer wheel bearing, 1970-73 (big spindle) excluding 1970 GT350 and GT500 A13 Inner wheel bearing, 1970-73 (big spindle) excluding 1970 GT350 and GT500 6815 Seal, wheel bearing (V8), excluding 1969 Boss, 1970 GT350 and GT500 9150S Seal, wheel bearing, 1969 Boss, 1969-70 Shelby GT350 and GT500 B5A1131A Dust cap, wheel bearing (V8), excluding 1969 Boss 05194 Spindle nut kit, each 1970-73 (big spindle) sales: 203-284-3863 email: sales@cobraautomotive.com 4 100-WBS www.cobraautomotive.com Rev051112 FRONT SUSPENSION COMPETITION COIL SPRING PIVOTS FOR 1965-1973 Because they handle the full load of the front coil springs, these modified spring perches (pivots) are an important part of your front suspension and one of Cobra Automotive’s trademark products. Our specially designed perches are fit with oil-impregnated bronze bushings riding on CNC machined; 3/4” diameter polished 1045 steel shafts, which provides a free moving solid pivot and enhances front suspension motility. To service easily, these pivots are equipped with snap rings and grease fittings and are completely rebuildable to ensure longevity. 100-3388 1965-73 COIL SPRINGS The experience we gain at the highest levels of competition is directly translated into the development of our products such as these coil springs, manufactured from high quality tempered steel. We consider our springs among the finest and recommend using the polyurethane spring insulators for all street applications. Upon request, custom springs are also available for different applications, although modification is required for final ride height. 250-C305 1965-66 250-C307 1967-73 (1965-66 for full competition) 250-CIN303 Polyurethane spring spacers, 1/8” Pair 250-GT578 Polyurethane spring spacers, 1/4” Pair 250-GT2276 Polyurethane spring spacers, 3/4” Pair COIL SPRING RUBBERS These are used as a fine suspension tuning tool when a spring rate needs to be changed in a hurry at the track. Can be inserted or removed quickly for that final ride height or spring rate adjustment. Each spring rubber is grooved on two sides and must be cut to fit between coils. MRG.1287.130 Front: 5-1/2”, 10 lb. rate (red stripe), each MRG.1287.148 Front: 5-1/2”, 15 lb. rate (white stripe), each MRG.1287.182 Front: 5-1/2”, 25 lb. rate (yellow stripe), each COIL SPRING LOCATORS Here is a very simple part that eliminates a complicated problem. This bolt-in spring locator eliminates the need for bolting or affixing the coil spring to the top of the spring bucket so that it does not fall out and dislocate under full suspension droop. The locators bolt into the stock three bolt pattern in the upper shock brace by replacing the factory bolts and provides an extended locating sleeve for the coil spring to ride on. Light weight steel construction. 1965-66 application only. Black powder coat finish. 100-CSL 5/16” studs, fits stock holes 100-CSL.375 3/8” studs, holes must be enlarged COIL SPRING COVERS Our custom super duty coil spring covers solve several common problems associated with competition prepared Mustang front ends. They are designed to work in conjunction with lowered racing upper control arms, along with competition alignment specs to avoid ball joint and tire interference during maximum suspension travel. This additional tire and suspension clearance allows you to run the proper profile tire along with the alignment specs needed. Our own design, and an integral strengthening member of the unibody. Black powder coat finish. 100-800 1965-66 100-800-67-70 1967-70 COMPETITION FRONT STRUT RODS Adjustable competition strut rods are a must for maximum performance for high speed braking stability. They eliminate the conventional rubber strut bushings which can flex causing excessive front end movement under heavy braking and extreme driving conditions. They completely eliminate this problem by using much heavier duty solid spherical rod ends in place of the stock bushings. Front end alignment is made easier by a simple turn of the adjusting sleeve for caster changes. Requires minor modification and welding to the original mounting points. 100-750 1965-66 sales: 203-284-3863 email: sales@cobraautomotive.com 5 www.cobraautomotive.com Rev051112 FRONT SUSPENSION FRONT STRUT RODS Here is an alternative to our all out competition front strut rod kit. This adjustable strut rod kit bolts-in without further modification. Provides good front end stability under most competition applications. All hardware included. Gloss black powder coated finish. 256-ASR-4 1964-66 Mustang 256-ASR-5 1967 Mustang 256-ASR-6 1968-70 Mustang KONI SHOCKS Used as original equipment on all early Shelby’s. We feel they are still one of the best oil filled performance shocks on the market for your early Mustang. Many original shocks are still in service today making them an excellent choice for the money. Adjustable dampening helps you achieve the ride you desire for race or street application. Optional polyurethane front eye bushings are easy to install and add life to your shock. 264-821388SP3 Front shocks (pair) 1964-70 208-98116G Polyurethane eye bushing 100-9800 Complete polyurethane kit upper and lower for front shocks KONI SHOCK BOLTS Our own reproduction of the unique 1965-1966 Shelby upper front Koni shock bolts, 5/16”24 X 1.60” long. Features include correct 9/16” hex head with slight dome and unthreaded “bull nose” tip. Includes a separate star washer. It’s a perfect finishing touch for that correct restoration or reproduction early Shelby. Silver cadmium plated finish. 100-SHOCK-BOLTS (set of four) QA1 ADJUSTABLE GAS SHOCKS Here is a great alternative to the Koni shock without quite the expense of our Penske shocks. These direct bolt-in aluminum shocks are externally adjustable. Simply turn the knob to simultaneously adjust rebound and compression with 12 different settings. Comes with heavy duty nylon incorporated into mounting points already with no need to replace rubber bushings. A completely rebuildable, single adjustable, shock at a very attractive price. 256-TC1544P Front shocks (pair) 1965-70 PENSKE COMPETITION SHOCKS In working with the engineers at Penske, we’ve developed the ultimate shock for the early vintage competition Mustang. This is a single adjustable aluminum bodied gas shock with no external reservoir. These shocks can be adjusted externally and can be rebuilt or custom valved for your specific application. The nitrogen charge can be checked with a special gauge available separately. Minor spring rate changes can be made by increasing or decreasing the pressure. 265-0065F Front shocks (Pair) (Specify year) SOME MODIFICATIONS REQUIRED (Instructions included) 265-PG Penske shock pressure gauge tool SWAY BARS There’s no question that the front sway bar is one of the most important chassis tuning components on a high performance vehicle. We believe in a larger sway bar and a softer spring that tends to be easier on the driver while making the vehicle more forgiving. Made of the finest quality tempered steel, they come complete with polyurethane frame mounts and end links. Most vintage organizations do not allow rod end front sway bars on early Mustangs. These are the very bars we use on our team cars. If you are looking to save some weight, try our custom made hollow tube sway bar. Our 1-1/4” diameter hollow bar is approximately 9 lbs. lighter than the equivalent 1-1/8” solid bar while maintaining the same stiffness. Hollow bars are gloss black powder coated finish. 250-536 1965-66 Solid 1” 250-549S 1965-66 Solid 1-1/8” 337-1000 1965-66 Hollow 1-1/4” 250-537 1967-70 Solid 1” 250-708S 1967-70 Solid 1-1/8” 337-1010 1967-70 Hollow 1-1/4” (Small block only) COMPETITION CROSS MEMBER Developed on the track and fantastic for the street. This cross member ties the lower control arms in with the chassis for more structural rigidity and support. Especially needed for unibody cars. A time tested improvement incorporated during the Boss 302 Trans-Am days. Gloss black powder coated finish. 336-101 1965-66 Mustang 336-1010 1967-70 Mustang and Cougar sales: 203-284-3863 email: sales@cobraautomotive.com 6 336-101 1965-66 Mustang 336-1010 1967-70 Mustang and Cougar www.cobraautomotive.com Rev051112 FRONT SUSPENSION STEERING BOXES Our steering boxes are a brand new Flaming River product. All new castings, sector gears and shaft with new needle bearings for smoother operation. Most of these boxes use the 16:1 quick steering ratio. With the original steering box turning 45 years of age, these new units are a must for high performance driving while keeping an absolutely stock appearance. 207-FR1497Q 1965-66, Quick ratio, 16:1, long shaft with 1” sector shaft 207-FR1497-1Q 1965-66, Quick ratio, 16:1, short shaft with 1” sector shaft for use with swivel or rag joint 207-FR1497-1 1965-66, Slow ratio, 19:1, short shaft with 1” sector shaft for use with swivel or rag joint 207-FR1498 1967-70, Quick ratio, 16:1, short shaft with 1-1/8” sector shaft for use with swivel or rag joint 207-FR1498-1 Early 1967, Quick ratio, 16:1, long shaft with 1-1/8” sector shaft. S736X6X2-1/2 Stub shaft, 3” X 3/4” 36 spline, (one end only) regular steel 207-FR1711 U-Joint 3/4”-36 Spline (both ends) steering box and steering shaft 207-FR1714DD U-Joint 3/4”-36 Spline (one end) X 1” DD on opposite end POWER STEERING CONTROL VALVE / CYLINDER Tired of unreliable power steering parts? Try these brand new power steering control valves and rams from Flaming River. These new components take the guess work out of your car’s age old steering problems. 207-FR1498PWR Power ram 1967-70 all Ford products 207-FR1498VLV Control valve 1967-70 all Ford products POWER STEERING HOSES These are the highest quality, most accurate, reproduction power steering hoses for the early Mustang that we know of. Manufactured to OE specifications with attention paid to correct bends, crimps and fittings. Perfect for replacing old leaking original lines or incorrect poorly fitting replacement lines. Most popular hoses listed; others available on request. PS7U1B 1967-69 Short line (Ford C60A 3A 717-A) PS4U1A 1967-69 Short line (Ford C60A 3A 714-A) PS3U4 1967-70 Valve to pump (Ford C8ZA 3A 713-A) PS4U2 1967-70 High pressure to valve (Ford C8ZA 3494-A) PS9C5 Pump/Cobra Jet (Ford C9ZA 3A 719-A) ROLLERIZED STEERING KIT Our roller bearing kit eliminates the stock pressed in combination rubber and steel idler arm bushing. This stock bushing flexes and eventually wears out, causing loss of steering input. Our roller bearing kit uses a greasable roller bearing for smooth operation and service. An important upgrade and something that will give new life to your original quick steering components. 299-333 Roller bearing steering kit with bushing for 1965-66 HEAVY DUTY TIE ROD END KIT Rollerized Steering Kit 299-333 Heavy Duty Tie Rod End Kit 100-1005 sales: 203-284-3863 This heavy duty tie rod end kit is a high quality replacement package for all V8 manual steering, 1965-66 Mustangs. We use larger Moog 1/2” outer tie rod ends instead of the stock 3/8” units. This kit must be used with our heavy-duty large spindle kit. These larger tie rods offer much more strength and reliability in a very stressful area. Parts also sold separately. 100-1005 1965-66 Super duty tie rod end kit, for 1965-66 manual steering with 1970-73 spindles ES336R Outer tie rod end, 1965-66 ES336L Outer tie rod end left hand 1965-66 power steering ES336L-CUSTOM Outer tie rod end left hand 1965-66 power steering for use with 1970-73 big spindles ES360RL Outer tie rod end, 1967-69 ES387R Outer tie rod end, 1970-73 ES713 Inner tie rod end, 1965-66 ES714 Inner tie rod end left hand 1965-66 power steering ES364RL Inner tie rod end, 1967-69, Except Boss ES387L Inner tie rod end, 1970-73 and 1969 Boss ES2004S Adjusting sleeve, 1965-70 ES638S Adjusting sleeve left hand 1965-66 power steering K8036 Upper ball joint 1965-73 four bolt style K8142 Upper ball joint 1967-73 three bolt style email: sales@cobraautomotive.com 7 www.cobraautomotive.com Rev051112 FRONT SUSPENSION BUMP STEER KIT Our bump steer kit compensates for toe changes that occur as the front suspension moves up and down. This is extremely important, up to 3/8” of toe change can be experienced when your suspension is moving through its full range of motion causing erratic steering. This kit completely eliminates your stock outer tie rod ends by replacing them with heavyduty aircraft-quality spherical rod ends. Our rod ends feature a carbon fiber lined race which is self lubricating and maintenance free. Special bushings located between the spindle arm and rod end give you the adjust ability needed to correct your car’s bump steer problem. We find an average of approximately 1/2”-5/8” of bushing is needed for normal bump steer correction. Adjusting sleeves are finished in yellow cadmium plating. 100-BSK-1 1965-66 Spindles 100-BSK-2 1967-69 Spindles 100-BSK-3 1970-73 Spindles COMPETITION REINFORCED CENTER LINKS Cobra Automotive reinforced competition center link for 1965–70 Mustangs with manual steering. We start with a new reproduction center link that is U.S. made to exceed OE standards. Gussets made of 1/4” thick mild steel are laser cut to fit the contours of the center link then welded in place. These gussets are located in two places, across the back and bottom edges so there are no clearance issues with the oil pan. This greatly reduces any center link flex that could cause unwanted toe changes, alignment or suspension movement. The improved strength of this piece allows the driver to get the full benefit of high performance suspension modifications such as bump steer kits, competition alignments, etc. Cast iron gray high temperature finish. 100-25756-G 1965-66 Manual steering 100-25823-G 1967-69 Manual steering (excluding Boss) 100-25824-G 1969 Manual steering Boss and all 1970 manual steering QUICK STEER KIT This road race quick steer kit consists of a high quality forged steel idler arm and pitman arm. These were first introduced on the original Shelby GT350s. This will fit any 1965-66 Mustang steering box with a 1” sector shaft, and will enhance your car’s handling with increased road feel and response time while reducing the need for excessive steering input. A must for any early Mustang set up for handling. Optional roller bearing kit reduces steering effort while adding service life to the idler arm. 100-3590R 1965-66 Quick steering kit, idler arm, pitman arm and frame pin 100-3590RR 1965-66 Quick steering kit, idler arm, pitman arm, frame pin and roller bearing kit 299-20203 Frame pin only, 1965-66, manual steering 273-QS2 Quick steering idler arm only, 1965-66, manual steering 273-QS3 Quick steering pitman arm only, 1965-66, manual steering Quick Steer Kit KONI POLYURETHANE SHOCK BUSHINGS This polyurethane bushing kit for Koni shocks provides an alternative to the stock rubber bushings that split and break down in a short period of time. If you want to maximize your shock potential this is the way to go. Easy to install yourself. 100-9800 Complete front shock kit, 1965-73 208-98116G Upper front bushing only, 1965-73 250-CIN302 Lower front bushing only, 1965-73 POLYURETHANE BUSHINGS Polyurethane replacement bushings give a more positive feel while extending suspension life. Replace your new or worn out old rubber bushings and your car will feel like it never has before. We have the right polyurethane bushing for your classic Mustang front suspension. 9-8120G End link kit, 1965-66 9-8117G End link kit, 1967-73 9-5108G Sway bar bushing, 7/8” bar 9-5109G Sway bar bushing, 15/16” bar 9-5110G Sway bar bushing, 1” bar 9-5112G Sway bar bushing, 1-1/8” bar 9-5113G Sway bar bushing, 1-1/4” bar 4-3101G Lower control arm bushing, 1965-66 4-3102G Lower control arm bushing, 1967-73 (1-7/16”) 4-3106G Lower control arm bushing, early 1967 (1-9/16”) 4-7111G Strut rod bushing, 1965-66 4-7112G Strut rod bushing,1967-73 sales: 203-284-3863 email: sales@cobraautomotive.com 8 www.cobraautomotive.com Rev051112 REAR SUSPENSION REAR SUSPENSION KITS We offer three basic stages of rear suspension kits so that you may select the level of performance needed for your application. From a street performance set-up, to full race, all three kits use only the best components available. Each kit features heavy-duty ½” U-bolts, heavy-duty spring perches, heavy-duty shackles, Koni shocks and new leaf springs. Individual component descriptions are featured on the following pages. Select a complete kit or order each item individually. Kits are shown with Koni shocks as a first choice. Optional shocks include QA1 Stocker Star gas shocks and Penske gas shocks. Both being gas filled aluminum bodied shocks and are an improvement over the tried and true Koni’s. Penske shocks being the top on the option chart are fairly easy to install. Some of the kits highlights are heavy-duty spring perch plates that are designed to work on all axle tube sizes and have a thicker shock mounting area for more shock support. 1/2” U-bolts that can be torqued higher for more clamping force and additional length allows for insertion of lowering blocks at a later date if need be. All variations of shackles have beefier side plates for more lateral support and reduced unwanted body roll. Leaf springs are new and made or selected to our standards for each individual application. Spring eye bushings provided with each kit offer the right combination of materials for the usage each vehicle will see. These kits have a combination of the perfect parts for the job, selected from years of experience with rear suspension tuning. Traction control devices are sold separately due to the wide variety of applications and products available. Please consult a Cobra Automotive representative regarding the proper traction control for your car. Stage 1 kit STAGE 1 KIT Stage 2 kit STAGE 2 KIT This is a great kit for high performance street and open track type events. You will feel a tremendous improvement over your stock components with this kit. It features high quality replacement springs approximately 120 lb. rating, heavy-duty polyurethane shackle kit, Koni shocks, 1/2” U-bolts and our own extra thick spring perches. 100-2000-1 1965-66 with standard 2-3/8” diameter axle tubes with 2-1/2” wide spring pads 100-2001-1 1965-66 with heavy-duty 3’’ diameter axle tubes 100-2002-1 1967-73 with standard 2-7/8” diameter axle tubes This kit is right at home on the race track while providing borderline usage for the street. The upgrades over the Stage 1 kit are the beefier 150 lb. or 160 lb. rate springs and the racing shackle kit with Del-a-lum bushings. Both of these components add a stiffer more positive ride. 100-2000-2 1965-66 with standard 2-3/8” diameter axle tubes and 2-1/2” spring pads. (Rate: 150 lbs.) 100-2001-2 1965-66 with heavy-duty 3” diameter axle tubes. (Rate: 150 lbs.) 100-2002-2 1967-73 with standard 2-7/8” diameter axle tubes. (Rate: 160 lbs.) Stage 3 kit STAGE 3 KIT Our state-of-the-art Stage 3 kit features the same heavy-duty components as our Stage 2 kit, plus Cobra Automotive’s exclusive slider shackles, solid front eye bushings and leaf springs. This kit automatically lowers the car 1” with these de-arched springs while allowing the ultimate in freedom of rear spring movement without any lateral deflection. Welding is required to mount rear sliders. This kit is designed for use on full competition cars. 100-2000-3 1965-66 with standard 2-3/8” diameter axle tubes and 2-1/2” spring pads 100-2001-3 1965-66 with heavy-duty 3” diameter axle tubes 100-2002-3 1967-73 with standard 2-7/8” diameter axle tubes sales: 203-284-3863 Chuck Bentley hammering his 1965 Shelby (#137) around Turn 2 at Road America with Curt Vogt (#530) barely visible as he rides Chuck’s bumper. Closely followed by Scotty Hackenson (#317) and John Brice (#70), bumperto-bumper, door handle-to-door handle racing is not uncommon in these stateof-the-art vintage racers. email: sales@cobraautomotive.com 9 www.cobraautomotive.com Rev051112 REAR SUSPENSION REAR LEAF SPRINGS If you are serious about handling, you’ll need to replace your original tired-out rear springs. These conventional-arched rear leaf springs are your best choice. We have a few different ratings, standard 120 lbs. for street and high performance applications or 150 lbs. for more of a competition use. Competition leaf springs with conventional or reverse eyes are designed for a 1-1/4” drop in ride height. Competition leaf springs are also available with a 2” drop. Reverse eye leaf springs greatly reduce spring wrap-up and require larger diameter bushings. Category 5 competition leaf springs (with shackles) are available in reverse eye only and include the highest quality spherical bearings, mounted front and rear in Del-a-lum bushings. These springs allow the rear end to tilt in a corner, keeping both rear tires planted firmly on the ground while providing enhanced rear end control and increased corner exit speed. 250-42437 1967-70 Standard 120 lb. spring rate 256-L10 1964-66 Competition 150 lb. spring rate (1-1/4” drop) 256-L11 1967-73 Competition 160 lb. spring rate (1-1/4” drop) 256-L10R 1964-66 Competition 150 lb. spring rate, reverse eye (1-1/4” drop) 256-L11R 1967-73 Competition 160 lb. spring rate, reverse eye (1-1/4” drop) 256-L10CAT5R 1964-66 Competition 150 lb. spring rate, reverse eye (1-1/4” drop) with shackles 256-L11CAT5R 1967-73 Competition 160 lb. spring rate, reverse eye (1-1/4” drop) with shackles Full Competition Springs COBRA AUTOMOTIVE FULL COMPETITION SPRINGS Developed by Cobra Automotive and race proven. These springs have several unique features including a smaller eye on one end to accommodate the slider shackle along with de-arching to lower the car automatically. These springs are de-arched 1” to lower the rear of the car and increase the spring rate. A special front solid eye bushing kit is included. These bushings are made of a combination of aluminum and high impact polyethylene to eliminate lateral deflection and body sway while allowing free movement. These race springs can only be used with our slider mounts. Welding is required to mount rear sliders. These springs are designed for use on full competition cars. 297-3315A 1965-70 Leaf springs with front bushings 297-3315AA 1965-70 Leaf springs with front bushings and rear sliders SLIDER SPRING MOUNTS SLIDER SPRING MOUNTS These slider mounts are developed to free up movement of the rear end by preventing suspension bind. The use of these sliders will also improve traction control by working more independently than a conventional shackle. These sliders along with the racing springs, make the ultimate handling package. Only for use with Cobra Automotive dearched road race springs. Supplied in bare steel, welding is required. 298-20236S (pair) SLIDER MOUNT REPAIR KIT SLIDER MOUNT REPAIR KIT Everything you need to rebuild or repair our slider spring mounts. Due to the harsh operating environment and severe loads placed on competition suspension components they should be inspected and lubricated regularly. Free movement without excessive play is key to obtaining the maximum benefit from the rear sliders. Each kit includes: one bolt, nut, steel tube, aluminum tube, two washers and bearings. A wise addition to your race spares package. (two kits required per car) 298-20236S-RK (each) ALUMINUM COMPETITION FRONT EYE BUSHINGS These bushings are assembled from a combination of 4130 steel, 6061 aircraft aluminum and high impact polyethylene for maximum control and longevity. A simple but very effective part for eliminating unwanted deflection during acceleration, deceleration and cornering. They fit any standard size front leaf spring eye and come automatically installed in our road race springs. Another unique race item designed and offered only by Cobra Automotive. Grade 8 Bolt kit for front spring eye bushings available separately. 100-3305 1965-73 (pair) 100-3306 Grade 8 bolt kit (pair) ALUMINUM COMPETITION FRONT EYE BUSHINGS ROLLERIZED ALUMINUM COMPETITION FRONT EYE BUSHINGS These are the next step up for positively locating the front leaf spring eye while ensuring free spring movement. Manufactured exactly the same as our regular competition bushings, described above, with the addition of two heavy-duty shell needle roller bearings per bushing. These roller bearings are rated for a dynamic load of 4400 lbs each and are retained with snap rings for easy lubrication and/or replacement. Grade 8 Bolt kit for front spring eye bushings available separately. 100-3305-ROLLER 1965-73 (pair) 09017344 Replacement roller bearing (each) 100-3306 Grade 8 bolt kit (pair) sales: 203-284-3863 email: sales@cobraautomotive.com 10 ROLLERIZED ALUMINUM COMPETITION FRONT EYE BUSHINGS www.cobraautomotive.com Rev051112 REAR SUSPENSION SOLID COMPETITION SHACKLE KIT Designed for better control under race conditions, this shackle kit with Del-a-lum bushings allows for less body roll during lateral loads with smoother suspension movement throughout its entire range of motion. This is the best set up to use when slider spring mounts are not allowed. Constructed of heat treated aluminum and high impact nylon also equipped with grease fittings for longevity. Anodized and plated for corrosion resistance. 256-CA5230 1965-73 (Fits stock size spring eyes) 256-CA5230-R 1965-73 (Fits larger size reverse spring eyes) STREET AND HIGH PERFORMANCE SHACKLE KIT Polyurethane compound bushings along with extra thick side plates gives a solid positive feel without compromising the ride characteristics. For high performance street and moderate track use. Side plates plated for corrosion resistance. 208-42135G 1965-73 (Fits stock size spring eyes) POLYURETHANE LEAF SPRING BUSHING KIT Replacing your stock rubber bushings with polyurethane will provide a great improvement over the stock components. These polyurethane bushings will greatly enhance your ride control and outlast the rubber bushing 2 to 1. 208-42101G 1965-73 (Fits stock size spring eyes) LEAF SPRING LOWER MOUNTING PLATES FOR STOCK EARLY 9” Heavy-duty spring plates for stock 1965-66 rear axle housings with 2-3/8” diameter axle tubes and 3” wide spring pads. Drilled to accept our larger 1/2“ U-bolts and reinforced to withstand the greater torque rating those bolts can handle. Will not flex or bend under extreme use or heavy shock loads. Satin black powder coat finish. 100-5796 1965-66 (pair) LEAF SPRING LOWER MOUNTING PLATES Our spring plates feature heavy gauge steel construction and are designed to withstand greater torque required by extra heavy-duty 1/2” U-bolts. Will not flex or bend under extreme use or heavy shock loads. A perfect addition to your street car as well. Slotted to accommodate all year rear end housings with standard 2-1/2” wide spring pads, including larger than stock 3” diameter axle tubes. Automatically machined to accept our heavy-duty 1/2” U-bolts. Will NOT fit staggered shocks. Satin black powder coat finish. 100-5795A 1965-73 (pair) SPRING PLATES WITH UNDERRIDE BRACKETS Same as the above, but with the underride traction bar brackets already welded into place. This is the ideal way to mount underride bars without having to sandwich multiple plates together. Results in a less complicated, cleaner look and a stronger installation. Slotted to accommodate all year rear end housings with standard 2-1/2” wide spring pads, including larger than stock 3” diameter axle tubes. Will NOT fit staggered shocks. Satin black powder coat finish. 100-5795B 1965-73 (pair) SPRING PLATES FOR PENSKE SHOCKS Heavy-duty spring plates for 3’’ axle tubes, required to mount racing coil-over style shocks or our aluminum Penske racing shocks. Designed for rear end housings with standard 2-1/2” wide spring pads. Plated for corrosion resistance. 298-20250 1965-73 (pair) sales: 203-284-3863 email: sales@cobraautomotive.com 11 www.cobraautomotive.com Rev051112 REAR SUSPENSION COMPETITION U-BOLTS Our 1/2” diameter steel U-bolts allow you to use 65 lbs. of torque when tightening as opposed to the OE 7/16” U-bolts only withstanding 45 lbs. of torque. This significantly increases the clamping force as they are much stronger than the stock units. Automatic increased length also allows use with 1“ lowering blocks. Unfinished steel set includes four washers and four nuts. 297-400 1965-66 (2-3/8” axle tubes) 297-500 1967-73 (2-7/8” axle tubes) 297-300 1965-73 (aftermarket 3” axle tubes) KONI SHOCKS Used as original equipment on all early Shelby Mustang’s. They are still one of the best performing oil filled shocks on the market for your early Mustang. Fully adjustable to help with traction control in the rear suspension. Polyurethane upper bushings sold separately. 264-821389 1965-73 Rear shocks (pair) 9-8101G Rear shock bushings, black polyurethane (set of four) QA1 ADJUSTABLE GAS SHOCKS Here is a great alternative to the Koni shock without the expense of our Penske shocks. These are a direct bolt in aluminum shock that is externally adjustable. With a simple turn of the knob, these direct bolt-in aluminum shocks can be externally adjusted for rebound and compression through twelve different settings. Includes heavy-duty nylon upper bushings and lower mounting brackets. A completely rebuildable single adjustable, shock at a very attractive price. 256-TC2511P 1965-70 Rear shocks (pair) PENSKE RACING SHOCKS We have worked with the people at Penske to come up with the ultimate shock for the early vintage race Mustangs. This is a single adjustable aluminum bodied gas shock with no external reservoir. These shocks can be adjusted externally and can be rebuilt or custom valved for each specific application. The nitrogen charge can be checked with a special gauge available separately. Minor spring rate changes can be made by increasing or decreasing the pressure. These will bolt in with the use of coil-over style rear spring plates, available separately. We have found more stability at any speed with these shocks while greatly reducing lap times. 265-0066R Rear shocks (pair) (specify year) 265-PG Penske shock pressure gauge tool QA1 ADJUSTABLE GAS SHOCKS PENSKE RACING SHOCKS CENTER MOUNTED TORQUE LINKS These center-mounted torque links are used as a centrally-located single traction bar for your early Mustang. One torque link in the center of the car allows for adjustable traction control while enabling the car to roll or pivot around this traction device. The result is a car that has more bite in the corners, eliminating the forces of two traction bars trying to control the car. We offer two different links, a Single action link with a 1000 lb “pull” spring acting on acceleration loads, and a rubber bumper to dampen down shifting/braking loads. The other is a Dual action link with a 1050 lb “pull” spring acting on acceleration loads and a 3700 lb spring to dampen down shifting/braking loads. Spring preloads are adjustable and additional spring rates are available for full tuneability. Chassis modifications and welding required. (Dual Spring unit pictured) 824-101-10 Single action torque link 25” center to center with 3/4” rod ends 206-20408 Dual action torque link 25” center to center with 3/4” rod ends 298-20402 Brackets for 9” Ford axle housing 298-20381 Brackets (5 hole) for front mount Center mounted Torque Link OVERRIDE SPRING RODS The override traction bar design has been the standard for years. Most racers have experienced the wheel hop that occurs when you combine down shifting with hard braking. Complete loss of rear wheel control can occur under these conditions. These spring rods have a 900 lb. rated compression spring and are designed to dampen this wheel hop condition while allowing the suspension to move more independently from left to right. The rod end mounting points let the body roll during cornering, creating a more neutral feel while not affecting the roll center of the car. Sturdy aircraft aluminum construction is virtually undetectable once painted in car. Spring preloads are adjustable with additional spring rates available. Available as a direct replacement for your original early Shelby or as a complete kit with rear end and interior floor brackets, includes all hardware. Chassis modifications and welding required, instructions are included. 100-20068A-2-3/8 1965-66 with 2-3/8” axle tubes, complete kit 100-20068A-2-7/8 1967-70 with 2-7/8” axle tubes, complete kit 100-20068A-3 1965-70 with 3” aftermarket axle tubes, complete kit 206-20068-1 1965-70 Spring rods only with rod ends 22-1/4’’ long sales: 203-284-3863 email: sales@cobraautomotive.com 12 OverRide Spring Rods Complete Kit Spring rods only www.cobraautomotive.com Rev051112 REAR SUSPENSION UNDERRIDE SPRING RODS This kit features the same spring rods as our popular override kit, but made to mount under your car. When mounted in the underride position, the 900 lb. rated compression springs dampen wheel hop due to extreme acceleration loads. Spring preloads are adjustable and additional spring rates are available. Aircraft quality rod end mounting points provide further adjust ability and trouble free service. Includes our leaf spring plates with integral traction bar mounts that are slotted to accommodate all year rear end housings with standard 2-1/2” wide spring pads, including larger than stock 3” diameter axle tubes. 100-20068B 1965-70 SHELBY STYLE UNDERRIDE TRACTION BARS 100-TMK1 100-TMK2 These traction bars can be used on any early Mustang chassis. They are an exact replacement underride traction bar as used on 1966 Shelby Mustangs. They will control axle wind-up and wheel hop at a very reasonable cost while maintaining that original vintage correct look. We also offer an upgraded version using heavier wall tubing and aircraft quality rod end mounting points for more positive location and adjustability. For rear end housings with standard 2-1/2” wide spring pads. Welding is required. 100-TMK1 1965-66 with 2-3/8” axle tubes, stock rubber bushings, painted finish 100-TMK2 1967-70 with 2-7/8” axle tubes, stock rubber bushings, painted finish 100-TMK3 1965-66 with 2-3/8” axle tubes, with rod end upgrade, satin black powder coat finish 100-TMK4 1967-70 with 2-7/8” axle tubes, with rod end upgrade, satin black powder coat finish 100-TMK5 1965-66 Stock Override bars Shelby 100-TMK3 100-TMK4 “CALTRAC” TRACTION CONTROL This is another traction control device that we have discovered. This unique style of bar offers unequaled control during hard acceleration without any welding or modification to the car. Preload is fully adjustable and properly adjusted, can be used successfully in road racing as well. Mostly used for drag racing, a great alternative to other styles of more complicated bars and ladder systems that need considerable fabrication to install. Comes complete with all mounting hardware, which includes leaf spring perches that will accept both staggered and regular shocks. For rear end housings with standard 2-1/2” wide spring pads. Instructions are included. Gloss black powder coat finish 340-6400 1965-73 Must be special ordered for other applications or use with mid eye springs “STAM-BAR” REAR SWAY BAR KIT This bolt-on rear sway bar kit features 5160H spring steel sway bar that will not bend or lose it’s “memory” like tempered mild steel bars will. Polyurethane mounting bushings give the bar firm support and feature grease fittings to maximize efficiency and reduce wear. The adjustable end links allow you to tailor the bars effect for different driving styles and track conditions. Kit includes all hardware, installation and tuning instructions. Fits OE staggered shock applications. 250-3SB 1965-70 5/8” diameter 250-2SB 1965-70 11/16” diameter 250-1SB 1965-70 3/4” diameter BILLET 1” LOWERING BLOCKS These solid billet aluminum rear lowering blocks are machined from 6061 T6 aluminum and will not snap when the U-bolts are tightened like cheap cast lowering blocks will. They come complete with 3/8” oversized grade 8 locating pins, hardware, and a special hardened drill bit for opening up locating pin hole in the leaf springs. This is a great way to get the handling and look you want at a cost that is reasonable. Heavy-duty 1/2” U-bolts can be purchased separately that will work in conjunction with lowering blocks. For use with standard 2-1/2” wide springs. 100-5570 1965-73 sales: 203-284-3863 email: sales@cobraautomotive.com 13 www.cobraautomotive.com Rev051112 12” FRONT BRAKES 100-3000 COMPETITION 12” FRONT BRAKE KIT Our giant 12” competition front disc brake kit is the largest vintage legal disc brake setup you can run with 15” wheels on any early Mustang. Our kit comes with 12” x 1-1/4” directionally ventilated and stress relieved rotors, billet 6061 aluminum hats and our large Kelsey-Hayes cast iron 4 piston (Lincoln) calipers. Also included are billet steel caliper mounting brackets, all necessary grade 8 hardware, braided stainless steel front flex lines and instructions. Many years of development have gone into this state of the art vintage legal brake setup. The rotor/hat assembly is a “slide-on/slide-off” design allowing for easy maintenance. Available with your choice of street or race compound carbon Kevlar pads for incredible stopping power. These are the same brakes used on the Bud Moore Trans-Am Boss 302 Mustangs of 1969 and 70 made with today’s manufacturing technology. Can be used with cast iron 1965-67 Mustang disc brake hubs or Cobra Automotive’s billet racing hubs. Compatible with Ford spindles that utilize the standard 4 bolt mounting pattern found on 1965-73 drum brake and 1965-67 disc brake Mustang spindles. (hubs and spindles are Not included, see front suspension section) 100-3000 1965-73 (Specify street or race compound pads) LARGE FOUR PISTON CALIPERS These are the largest 4 piston calipers Ford made for the 60’s era applications. Originally used on T-birds, Galaxies and Lincolns of the Day. Bud Moore used these same style calipers on his famous Trans-Am race cars that brought Ford the championship. The pistons are large 1.950 diameter for superior braking force, made to our own specs for lighter weight and no groove for stock dust boots. These calipers are machined and remanufactured in-house to our own specifications. Fit with new custom seals, stainless steel bleeders, pad retainers and crossover lines. Finished in a maintenance free, silver High-Temp, thermal barrier coating. (pads are Not included) 100-2812 Pair of large four piston calipers 100-120 Right Hand (pass. side) large four piston caliper only 100-121 Left Hand (driver side) large four piston caliper only sales: 203-284-3863 email: sales@cobraautomotive.com 14 www.cobraautomotive.com Rev051112 12” FRONT BRAKES COMPETITION 12” DIAMETER ROTORS Cobra Automotive’s own custom made 12” diameter directional vented rotors are a full 1-1/4” thick vs. the stock 13/16” thick 11” ones from the factory. Thirty-six directional cooling vanes compliment this rotors ability to dissipate heat while the special stress relieving process reduces the possibility of warping during the break in period. Made of the same high quality material used in all forms of professional racing. Also available with additional Cryogenic treatment for extra life and rotor stability. Sold individually. 200-DV36R Right Hand (pass. side) 200-DV36L Left Hand (driver side) Cryo-Rotor Each (Cryogenic treat rotor only, no hub) BRAKE ROTOR HATS CNC machined from aluminum with the proper 1.59” offset for compatibility with our caliper and caliper mounting brackets. These hats can be used with stock cast iron 1965-67 Mustang disc brake hubs or our own billet disc brake hubs for easy “slide-on/slide-off” rotor removal. Buy these hats once and then simply replace only the rotors when needed for cost reducing efficiency. Makes rotor replacement on the vehicle a snap. Designed with a common 8 on 7” rotor bolt pattern these must be used with our racing rotors. Aluminum finish. (for standard Ford 5 on 4-1/2” wheel stud pattern) 100-HAT-1 (each) 100-HATS-PAIR-1 (pair) 211-0233D Bolt kit, Grade 8 (pair) CALIPER MOUNTING BRACKETS These brackets are CNC machined of high quality billet steel to our rigid standards and specifications to mount our specially machined large four piston calipers. Made specifically for the big Lincoln style calipers used with our 12” brakes just like the ones made for Ford’s Trans Am program. Compatible with Ford spindles that utilize the standard 4 bolt mounting pattern found on 1965-73 drum brake and 1965-67 disc brake Mustang spindles. Comes with all the necessary grade 8 mounting hardware and spacers for proper rotor offset and caliper spacing. Finished in yellow cadmium plating. 100-212 (pair) STANDARD 12” FRONT BRAKE COOLING KIT This kit includes our “industry standard” single piece cooling plates for our large 12” road racing brakes. Utilizing 3” reinforced hoses, these brake duct cooling plates mount directly to the spindle sealing the back of the rotor. This design forces air into the center of the rotor and out through the curved vanes greatly increasing brake cooling while extending rotor and pad life. This all adds up to better braking efficiency and reduced rotor warping. Cooling plates finished in a maintenance free, silver high-temperature thermal barrier coating. 100-2100 Complete kit for 12” Competition front brakes 100-2100P 12” Single piece cooling plates only (pair) RFH3 Cooling hose, each, black, 3” diameter by foot length, rated to 300* F Scat-12 Cooling hose, each, orange, 3” diameter by 11 foot length, rated to 500* F COMPETITION MULTI PIECE 12” FRONT BRAKE COOLING PLATES These competition multi piece cooling plates are designed for the absolute maximum cooling effect to our 12” disc brake rotors. Intricately made in two pieces to fit our big spindles like the proverbial glove, these cooling plates also feature a special lip around the outer circumference for a complete 360 degree seal to the rotor. Developed on our own in-house No. 530 competition car as part of our ongoing efforts to provide the finest components possible for the vintage racing Mustang. Finished in a maintenance free, silver high-temperature thermal barrier coating. 100-ADSP 12” multiple piece cooling plates only (pair) sales: 203-284-3863 email: sales@cobraautomotive.com 15 www.cobraautomotive.com Rev051112 12” FRONT BRAKES COMPETITION 12” FRONT BRAKE COOLING KIT We have found this to be the ultimate in state of the art cooling for our competition 12” front brakes. Featuring our competition multi-piece cooling plates, this kit goes yet another step further in answering the problem of cooling the front brakes on a maximum effort vintage road race Mustang. Additional 3” reinforced hoses feed air from twin electric cooling blowers mounted in the high pressure area of the wheel house just behind the front tires. This combined with the ram effect air from the front apron provides maximum cooling to the front brakes at all vehicle speeds. The blowers included are purpose built for racing applications providing 145 CFM of flow each, with five blade fans and low AMP draw motors. Kit includes all hoses, clamps, brackets and hardware for installation. Debris screens are provided to protect the blower fans from damage. Plates are finished in a maintenance free, silver high-temperature, thermal barrier coating. 100-ADS-KIT Complete competition 12” front brake cooling kit RFH3 Cooling hose, each, black, 3” diameter by foot length, rated to 300* F Scat-12 Cooling hose, each, orange, 3” diameter by 11 foot length, rated to 500* F BRAKE PADS & SHIMS FOR T-BIRD CALIPERS - D1 SIZE We believe the Carbon Kevlar R4 compound to be one of the best all round compounds for “Full Race” competition use. This compound “beds-in” quickly so you can concentrate on driving at speed almost immediately. Also available in a R4S compound, great for auto-crossing, driver’s schools, solo events, and rallies. We offer a broad selection of compounds based on years of testing & racing at various tracks. Friction coefficients from highest to lowest would be ST47, DTC70, PFC.01, ST43 and R4. Approximate temperature ranges from highest to lowest are: ST47 and DTC70 at 400F to 1600F, PFC.01 and ST43 at 300F to 1400F and R4 at 200F to 1000F. However all peak their performance in the 700F to 900F range. As far as rotor wear goes, from least to most, the order is R4, ST47, ST43, PFC.01 and DTC70. Please call to discuss which compound(s) would suit your driving style or typical race length. 201-D1R4 12’’ Caliper full race carbon Kevlar compound, .600 thick 201-D1R4S 12” Caliper street and autocross carbon Kevlar compound, .600 thick 201-APD1-PFC.01ET 12” Caliper full race Perf. Friction 01 compound, .600 thick 201-HawkDTC70-D1 12” Caliper full race Hawk DTC70 compound, .600 thick 201-D1ST43 12” Caliper full race Raybestos ST-43 compound, .600 thick 201-D1ST47 12” Caliper full race Raybestos ST-47 compound, .600 thick Shims are used to offset pad wear on good “bedded in” pads and keep the pistons from cocking or sticking. Quicker and less expensive than replacing pads in enduro races. Laser cut from stainless steel, in 2 thicknesses. Sold individually. 100-ERW2681-1 Shim, caliper pad (each) .060” stainless steel, Kelsey/Hays T-bird D-1 100-ERW2681-2 Shim, caliper pad (each) .125” stainless steel, Kelsey/Hays T-bird D-1 CALIPER PISTONS – ASSOCIATED PARTS We manufacture our own caliper pistons for the large Kelsey-Hayes 4 piston (Lincoln) calipers. Made of 41L40 cold drawn steel with electrolysis nickel plating for a 32 micron smooth surface and an overall size of 1.945” diameter. The piston’s wall thickness has been reduced to .20’’ for lighter weight and the dust boot grove has been deleted for competition use. 0215-5-1001 Piston each for large four piston caliper S6858 Bleeder screw each for large four piston caliper 100-0001 Pad retainer each stainless steel, for large four piston caliper TBD 1001 Transfer tubes pair stainless steel, for large four piston caliper 0215-5-1001 CALIPER PISTON SEALS FOR T-BIRD CALIPERS OE seal kits include 4 seals and 4 dust boots per kit (1 kit per caliper) with an operating range up to 250 F. WK515 Seal Kit each OE for 12” Caliper Piston (1 required per caliper) WK515 BRAIDED FRONT BRAKE LINES These race quality braided stainless steel lines are specially made for the large four piston 12” brake calipers with 3/8” inlets. They can withstand the high pressures of competition use and will not swell like stock rubber lines. Flexible with extra length for ease of routing. Sold in pairs complete with all necessary fittings, copper crush washers and retaining clips. 230-173 Lines (pair) for the large four piston calipers sales: 203-284-3863 email: sales@cobraautomotive.com 16 www.cobraautomotive.com Rev051112 11” FRONT BRAKES FRONT BRAKE KITS (11”) FOUR PISTON CALIPERS 11” This period correct 11” disc brake kit features cast iron 4 piston calipers nearly identical to the originals used on 1965 Mustangs except they are fitted with lighter weight pistons made of stainless steel and have 1967 style 7/16” inlet ports. Rotors are one piece cast iron, straight vane ventilated, .8125” thick x 11.25” diameter, suitable for most vintage race applications requiring OE type brakes. This nonpower application kit includes everything pictured above with a 1” dual master cylinder, adjustable proportioning valve, OE type pads and rubber flex lines. We also offer a non-vintage style kit featuring aluminum four piston calipers, slotted rotors, high performance pads and stainless braided lines as well as the 1” dual master and adjustable proportioning valve, etc. Both kits fit manual brake applications only. Cryogenic treatment of the rotors is an available upgrade for extra life. 203-A120D Period correct type kit with cast iron calipers fits four bolt 1964-69 Mustang drum brake spindle or 1964-67 Mustang disc spindle 203-A120-2 Non-vintage style kit with aluminum calipers fits four bolt 1964-69 Mustang drum brake spindle or 1964-67 Mustang disc spindle Cryo-Rotor+Hub Each (Cryogenic treated rotor-hub assembly) FOUR PISTON CALIPERS 11” 203-A62-2 203-A63-2 Caliper each, period correct cast iron, LH with light weight stainless steel pistons and 3/8” inlet port (D11 size replacement pads) Caliper each, period correct cast iron, RH with light weight stainless steel pistons and 3/8” inlet port (D11 size replacement pads) FRONT 11’ DIAMETER ROTORS FRONT 11’ DIAMETER ROTORS BD60208 BD60209 BD60210 FBR4 1965-67 Mustang, one piece, Wagner brand (Use A2 and A6 WB & 6815 Seal) 1968-69 Mustang, one piece, Wagner brand Use A2 and A6 WB & 6815 Seal) 1970-73 Mustang, one piece, Wagner brand (Use A2 and A6 WB & 6815 Seal) 1969-70 Shelby GT350, GT500 and 69 Boss 302, 2pc, USA made (Use A3 and A5 WB and 9150S Seal) Cryo-Rotor+Hub Each (Cryogenic treat rotor-hub assembly) CALIPER MOUNTING BRACKETS 11” CALIPER MOUNTING BRACKETS 11” These four bolt caliper mounting brackets fit 1964-73 Mustang drum brake spindle or 1964-67 Mustang disc brake spindle and will mount the calipers listed above. Gloss black powder coat finish. 203-A2400 Caliper mounting bracket, LH 203-A2401 Caliper mounting bracket, RH B-12700 Bolts pair, caliper mounting 1965-67 (Req. 1 pair / caliper) FRONT BRAKE COOLING KIT 11” FRONT BRAKE COOLING KIT 11” sales: 203-284-3863 It’s a fact that the smaller the brakes are, the harder they have to work. Stock 11” brakes benefit greatly from our tried and true cooling kit. This kit is designed to fit the stock or repro four piston, fixed caliper 11” disc brakes as found on 1965 to 1967 Ford Mustangs. Works just like our 12” version. Please refer to that description on page 15 for more details. Cooling plates finished in a maintenance free, silver high-temperature, thermal barrier coating. 100-2105 Complete kit 1965-67 11” front brakes 100-2105P 11” Single piece cooling plates only pair 1965-67 11” front brakes RFH3 Cooling hose, each, black, 3” diameter by foot length, rated to 300* F Scat-12 Cooling hose, each, orange, 3” diameter by 11 foot length, rated to 500* F email: sales@cobraautomotive.com 17 www.cobraautomotive.com Rev051112 11” FRONT BRAKES COMPETITION - HIGH PERFORMANCE BRAKE PADS 11” These pads are the same premium competition – high performance compounds fully described in the 12” brake section. Please refer to those descriptions on page 16 to see which compound suits your particular driving style or typical race length. Call for other applications not listed. 201-D11R4 1965-67 11” Caliper full race carbon Kevlar compound set 201-D11R4S 1965-67 11” Caliper high performance street and autocross carbon Kevlar compound set 201-D34R4 1968-70 11” Caliper full race carbon Kevlar compound set 201-D34R4S 1968-70 11” Caliper high performance street and autocross carbon Kevlar compound set CALIPER PISTONS – ASSOCIATED PARTS 11” These caliper pistons are made of stainless steel to resist corrosion. Machined for lighter weight they retain less heat and retract quicker than stock pistons. The dust boot groove is retained for street use. 203-A0108R Piston each 1965-67 11” caliper S6858 Bleeder screw each 1965-67 11” caliper 203-A17 Pad retainer each, stainless steel, 1965-66 11” caliper (one large retainer) 203-A14 Pad retainer each, stainless steel, 1967 11” caliper (two small retainers) 203-C1407 Transfer tube LH each, stainless steel, 1965-67 11” caliper 203-C1408 Transfer tube RH each, stainless steel, 1965-67 11” caliper 203-AO108R CALIPER PISTON SEALS FOR MUSTANG CALIPERS OE seal kits include 4 seals and 4 dust boots per kit (1 kit per caliper) with an operating range up to 250 F. Designed to fit the stock or repro 4 piston calipers as found on 1965 to 1967 Ford Mustangs. WK518 Seal Kit each OE 1965-67 for 11” Caliper Piston (1 required per caliper) DUAL RESERVOIR MASTER CYLINDERS When preparing your brake system for competition use, the proper master cylinder for your application is all-important. Our large-bore dual reservoir master cylinders come in three piston sizes: 15/16”, 1” & 1-1/8”. Brake size and line pressure requirements will dictate which is the correct size master cylinder for your application. The 1” and 1-1/8” master cylinders are made of lightweight aluminum and the 15/16” unit is made of iron. The aluminum versions weigh 4 pounds less than the iron ones. Built by the OE manufacture, they are a safe alternative to your single reservoir master cylinder in the event of a front or rear brake circuit failure. Will fit original master cylinder bolt pattern of all Mustangs and most Ford products. Pre-bent stainless steel lines for Mustangs included with complete kits. Line kits also available separately. For manual brakes only. (Note: manual brake pedals have a different pivot point). 100-131602 15/16” bore, cast iron, master cylinder only 100-101518 1” bore master cylinder only 100-101518K 1” bore master with lines for stock proportion valve 100-101518K1 1” bore master with lines for adjustable proportioning valve 100-101897 1-1/8” bore master cylinder only 100-101897K 1-1/8” bore master with lines for adjustable proportioning valve HELP-42069 Gasket, master cylinder lid, fits 15/16” bore & Mustang disc brake 1967-71 HELP-42080 Gasket, master cylinder lid, fits 1” & 1-1/8” bore SINGLE RESERVOIR REPRODUCTION OE-TYPE MASTER CYLINDER (see below) 203-A0404 Master cylinder, 1965-66 Mustang disc brake, non-power, single bowl WK518 BRAKE LINE JUNCTION BLOCK When replacing your lines or plumbing a new brake system it is nice to start with a new junction block to insure proper seating of lines. Anti-corrosive brass construction. 652075 1965-66 Brake line junction block PROPORTIONING VALVE REBUILDING KIT If your stock proportioning valve has not been rebuilt recently chances are it needs attention. The kits come complete with instructions, special Viton seals and replacement springs if applicable. (Note; The kits do not include the proportioning valves, which are shown here for visual identification only. Valve pictured on the left is for 1965-66, valve on the right is for 1967-69). 100-1656 1965-66 Proportioning valve rebuilding kit 100-1679 1967-69 Proportioning valve rebuilding kit sales: 203-284-3863 email: sales@cobraautomotive.com 18 www.cobraautomotive.com Rev051112 FRONT BRAKES ADJUSTABLE BRAKE PROPORTIONING VALVE These proportioning valves are made of aluminum and provide easy adjustment for setting front to rear brake bias when using a front disc brake system. Whether you have drums or discs in the back you can change bias simply by turning the knob in or out to decrease or increase rear brake line pressure. Easily mounted under the hood in a similar to stock location or in the drivers compartment within reach for adjustment while driving. 300-2220 Adjustable brake proportioning valve ADJUSTABLE BRAKE PUSH ROD This adjustable rod replaces your stock non adjustable brake push rod. This rod is located between your brake pedal and master cylinder. When the brake pedal is pushed this rod presses on the back of the master cylinder starting the flow of pressure through the system. By installing this adjustable rod, it will allow you to take out any play in your brake pedal, therefore reducing reaction time of pressure to the brakes. The end result is a more consistently high and hard brake pedal. A great confidence builder when diving deep into a corner. Will fit all years. Recommended for manual brakes only. Some years require fabrication of a pedal up-stop. (Supplied assembled with extra long adjuster for reinforced firewalls, stock adjuster also included). 100-A21161 Adjustable brake push rod BRAKE RESIDUAL VALVES These valves are used to maintain a small amount of pressure in the lines so the caliper or wheel cylinder pistons are poised for instant movement. This will help give a more responsive pedal. Please specify drum or disc brakes. Disc brakes use 2 psi valve and drum brakes require 10 psi valve because of extra tension from drum brake return springs. WIL-260-1874 front 2 psi (Disc brake) WIL-260-1876 rear 10 psi (Drum brake) RACING BRAKE FLUID If you are experiencing brake pedal fade, you may be boiling your brake fluid. When everything else in your brake system is just right you need a good brake fluid. We feel that AP600 brake fluid is one of the finest you can use. It has a minimum dry boiling point of 600 degrees and comes in convenient 16.9 oz bottles. Larger bottles tend to get contaminated faster by exposure, due to constant opening and closing of the container. Don’t rely on a second rate fluid when it comes to your brakes. We rely on AP600 brake fluid in our own race cars. AP600 Racing Brake Fluid,16.9 US fluid oz (each) BRAIDED BRAKE LINES These race quality braided stainless steel lines can withstand the high pressures of competition use and will not swell like stock rubber lines. These kits are a very cost effective way to improve your brake system’s performance and reliability. Sold as complete sets (two front lines and one rear) with OE type brackets and fittings for Mustangs originally equipped with front disc & rear drum brakes. 209-SBH6086 1965-66 three piece set GT & Shelby with front disc brake (3/8” caliper fitting) 209-SBH6305 1965-66 three piece set NON GT with front disc brake (3/8” caliper fitting) set 209-SBH6087 1967 three piece set with front disc brake (7/16” caliper fitting) 209-SBH6088 1968-69 three piece set with front disc brake, 28 spline 9” rear end 209-SBH6311 1968-69 three piece set with front disc brake, 31 spline 9” rear end 209-SBH6306 1970 three piece set with front disc brake FRONT LINES ONLY 203-14325 Front lines Only pair with OE type fittings 1965-66 11” caliper 3/8” inlet fitting 203-14326 Front lines Only pair with OE type fittings 1967 11” caliper 7/16” inlet fitting 230-171 Front lines Only pair NON OE fittings 1965-66 11” caliper 3/8” inlet fitting 230-172 Front lines Only pair NON OE fittings 1967 11” caliper 7/16” inlet fitting COMPETITION WHEEL STUDS These race quality extra long wheel studs are 3” long with an unthreaded bull nose tip for quick installation of lug nuts. Made of heat treated 8740 chrome moly steel they have a tensile strength of 200,000 psi. This enables them to handle the shear and lateral loads found in competition applications. Must be used with open end, hollow type, lug nuts or they can be cut down to accommodate standard “Acorn” style lug nuts. Finished in yellow cadmium plating. 100-7707 Studs five piece set 1965-67 rotors sales: 203-284-3863 email: sales@cobraautomotive.com 19 www.cobraautomotive.com Rev051112 REAR BRAKES COMPETITION 11” REAR DRUM BRAKE KIT This kit features top quality new, all American made components. It will increase the size of your existing 10” rear brakes to a full 11’’ in diam. and will greatly increase your braking capability. This is the largest rear drum brake kit available for a vintage Mustang and requires the use of 15” wheels. Our kit comes in two variations. The Competition kit comes with Carbon Kevlar race compound shoes and large 1-1/8” wheel cylinders. The Street / Performance kit comes with OE compound shoes and 15/16” wheel cylinders. Our Competition 11” rear drum brake kit works so well, it is not unusual to out perform cars with 4 wheel disc brakes. If you want awesome stopping power, this is definitely the set up to use. These kits must be used with the large Torino Style housing flanges with the 3.150” diameter axle bearings. Cryogenic treatment of the drums is an available upgrade for extra life and stability. 100-210S 11” Street/Performance drum brake kit 100-210R 11” Competition drum brake kit 100-210 STREET/PERFORMANCE 11” REAR DRUM BRAKE KIT This is a complete 11” rear drum brake kit for street / performance applications. Comes with 11” x 2” finned drums and is designed for Ford 8” & 9” small (2.835” diam.) axle bearing housing flanges. Supplied assembled on backing plates with e-brake hardware and high performance shoes. Requires the use of 15” wheels. MPB-DR1504K Drum brake Ford 8” & 9” small bearing housing flanges SPECIAL ORDER NEED MEASUREMENTS Cryo-Drum Each (Cryogenic treat drum only) MPB-DR1504K SHELBY STYLE COMPETITION 10” REAR DRUM BRAKE KIT Just like it’s big brother this competition drum brake kit is a top quality re-issue of the original 1965-67 Shelby Mustang 10”x 2-1/2” rear brakes. Supplied with competition upgrades like Carbon Kevlar race shoes and larger 1” wheel cylinders. No e-brake hardware provided, may be used with original emergency brake hardware, if desired. Designed for use with Ford 8” & 9 small (2.835” diam.) axle bearing housing flanges. 100-209R 10”x 2-½” Race drum brake kit 100-209R 10” x 2-1/2 Race Drum Brake Kit COMPETITION REAR BRAKE DRUMS These premium quality drums are the same ones we use in our competition brake kits. Available in 10” x 2-1/2” and 11” x 2-¼” sizes. The 11” drums available in Finned or Non finned configurations. Also available with additional Cryogenic treatment for extra life and drum stability. 304-2603 each 10”x 2-1/2” Drum Raybestos Brand WITH drum locator ring for OE axles w/ 2.425” locator 2603 each 10”x 2-1/2” Drum Raybestos Brand NO machining or locator ring included. Must be modified for use 100-1002 Locating rings, pair, for 10” X 2-1/2” drum, 2.45” ID x 2.795” OD BD60351 each Non finned 11”x 2-1/4” Drum Wagner Brand for axles with 2.77” locator 304-60288F each Finned 11”x 2-1/4” Drum Wagner Brand for axles with 2.77” locator Cryo-Drum Each (Cryogenic treat drum only) sales: 203-284-3863 email: sales@cobraautomotive.com 20 www.cobraautomotive.com Rev051112 REAR BRAKES CARBON KEVLAR BRAKE SHOES These direct replacement shoes are lined with Carbon Kevlar material that is both bonded and riveted for added strength. Carbon Kevlar material provides superior stopping capability combined with a very drum friendly nature. We believe the R4 compound to be one of the best all round compounds for “Full Race” competition use. Optimum operating range is 450F to 1200F. This compound “beds-in” quickly so you can concentrate on driving at speed almost immediately. Also available in a High Performance Street and Autocross R4S compound. The “S” compound is very fade resistant and is good for autocrossing, some driver’s schools, solo events, and rallies. 201-169R4 10”x 2-1/2” Full Race compound set 201-169R4S 10”x 2-1/2” High Performance Street and Autocross compound set 201-263R4 11”x 2-1/4” Full Race compound set 201-263R4S 11”x 2-1/4” High Performance Street and Autocross compound set BACKING PLATES For those people needing to replace worn out and rusted backing plates or that need to build a new brake system these will do the job. Factory new Ford stampings made in the USA that are available in 10” or 11”. 10” plates are designed for use with Ford 8” & 9 small (2.835” diam.) axle bearing housing flanges and will fit 2 ½” shoes. 11” plates are designed for use with large (3.150” diam.) axle bearing, Torino Style, housing flanges and will fit 2 ¼” shoes. 100-5001 10” x 2-1/2” LH backing plate (2” x 3.375” bolt pattern) 100-5002 10” x 2-1/2” RH backing plate (2” x 3.375” bolt pattern) E5TZ-2212B 11” x 2-1/4” LH backing plate (2” x 3.5625” bolt pattern) E5TZ-2211B 11” x 2-1/4” RH backing plate (2” x 3.5625” bolt pattern) 100-1002 Locating Rings pair, 2.45” ID x 2.795” OD WHEEL CYLINDERS We are a believer in larger wheel cylinders. Standard size wheel cylinders are not large enough to have sufficient force for severe braking conditions. Larger wheel cylinders will increase the ability to apply more pressure to the shoes and drums . We recommend a 1” wheel cylinder on 10” brakes and a 1-1/8” wheel cylinder on 11” brakes under most conditions. A great upgrade for the street as well. We also recommend our larger master cylinder to compliment the need for more fluid volume with larger wheel cylinders. All wheel cylinders universally fit either brake size. WC9025 LH 1” wheel cylinder Raybestos Brand WC9026 RH 1” wheel cylinder Raybestos Brand WC36057 LH 1-1/8” wheel cylinder Raybestos Brand WC36058 RH 1-1/8” wheel cylinder Raybestos Brand BRAKE HARDWARE KITS Brake hardware should be replaced often as springs lose their critical tension over a period of time. Weak springs cannot hold the shoes in place for proper seating. All American made hardware guaranteed to fit. F78521S Hardware kit 10” x 2 1/2” brakes Wagner Brand (one per car) F113825S LH Adjuster kit only 10” x 2 1/2” brakes Wagner Brand F113826S RH Adjuster kit only 10” x 2 1/2” brakes Wagner Brand F78551S Hardware kit 11” x 2 ¼” brakes Wagner Brand (one per car) F98374S LH adjuster kit only 11” x 2 ¼” brakes Wagner Brand F98375S RH adjuster kit only 11” x 2 ¼” brakes Wagner Brand H1191 Hold Down Cup each 10” & 11” BRAIDED REAR BRAKE LINE Race quality braided stainless steel line that is able to withstand the high pressures of competition use. Will not swell like a stock rubber line. Designed for 1965-66 Mustangs with factory 9” rear axle housing and dual exhausts. Complete with 7/16” x 20 vent bolt, brass junction block and frame clip. Hard lines must be made to fit. 230-174 1965-66 sales: 203-284-3863 email: sales@cobraautomotive.com 21 www.cobraautomotive.com Rev051112 REAR BRAKES STANDARD REAR DRUM BRAKE COOLING KIT Keeping the rear brakes cool is very important and has a direct affect on brake shoe life. This simple but very affective kit is easy to install. The air scoops mount to the rear axle housing with clamps and 3” hoses connect to the backing plate with bolt on hose adapters. There is no ground clearance issue because the air scoops move up and down with the suspension. Holes will need to be drilled in the backing plate for cooling and adapter flange mounting. One size fits both 10” and 11” backing plates. 100-2500 1965-73 Standard cooling kit COMPETITION DUAL DUCT REAR DRUM BRAKE COOLING KIT When even more cooling is required for the rear drum brakes on a maximum effort Mustang vintage race car, this upgraded kit is the answer. Dual ducts feeding air into two 3” hose adapters on each backing plate yield an immediately noticeable increase in cooling effectiveness. We have seen less pad wear and reduced fade every time this upgrade has been installed on one of our vintage race cars. As with the standard kit there is no ground clearance issue because the air scoops move up and down with the suspension. Twice as many holes will need to be drilled in the backing plate for cooling and adapter flange mounting but it will be worth the effort. One size fits both 10” and 11” backing plates. 100-2700 1965-73 Dual Duct cooling kit REAR DISC BRAKE KITS Imagine the stopping power of 4 wheel disc brakes on your early Mustang! These kits will upgrade your Ford 8” or 9” drum brake rear to disc brakes. Manufactured from new high quality parts with all hardware needed to complete the conversion. Most kits include late model Mustang single piston calipers with built in parking brakes. Must use adjustable proportioning valve sold separately. Please specify year and model of car when ordering to determine axle splines and housing size for proper kit selection. Please call for assistance. Note, bolt pattern on Ford large bearing is different than that on Ford Torino large bearing. 203-A110-2 Ford 9” large bearing (3.150”) rear end 45 mm single-piston cast iron caliper & 10.5” rotor 203-A111 Ford 8” and 9” small bearing (2.835”) rear end 54 mm SVO caliper & 11.25” rotor 203-A111-2 Ford 8” and 9” small bearing (2.835”) rear end 45 mm single-piston cast iron caliper & 10.5” rotor 203-A111-3 Ford 9” Torino large bearing (3.150”) rear end 45 mm single-piston cast iron caliper & 10.5” rotor 203-A111-21 Ford 9” Torino large bearing (3.150”) rear end 54 mm Force 10 alum single piston caliper & 11.25” slotted & plated rotor BRAKE PADS FOR REAR DISC BRAKE KITS Here are some Carbon Kevlar R4 & R4S compound pads to fit the rear disc brake kits above. See below for applications. R4 is a “Full Race” compound with an operating temperature range of 200F to 1000F. The R4S street compound is great for autocross, driver’s schools, solo events, and rallies. 201-AP347-R4S Brake pads, street and autocross compound, fits #s 203-A110-2, 203-A111-2 and 203-A111-3 201-D204R4S Brake pads, street and autocross compound, fits #s A111 and A111-21 201-D204R4 Brake pads, full race compound, fits #s A111 and A111-21 sales: 203-284-3863 email: sales@cobraautomotive.com 22 www.cobraautomotive.com Rev051112 DRIVE TRAIN JERICO RACING TRANSMISSION Shown with optional Pro-Billet shifter These lightweight aluminum transmissions weigh 74 lbs (a full 34 lbs lighter than a stock iron toploader). They are best known for their reliability and ability to withstand hours of continued punishment under the most extreme conditions. Straight-cut gears and dog ring type synchros give you the ability to shift these transmissions with lightening speed with or without the clutch. Unlimited gear selection enables you to custom tailor your gear sets for each track and drivers personal preference. Reduced rotating weight and drag due to precision cut gears with fully rollerized mainshaft and tailshaft reduces temperature while increasing driveline horsepower. Every Jerico racing transmission is built to order. Supplied with 26 spline input shaft for Ford pilot bearing; also requires JER-1350YMW slip yoke (see page 26). Pictured with optional Pro-Billet shifter installed. JER-WC4-4 Jerico racing transmission with low profile top cover, WC4-4 JER-491-0500-0 Hurst Pro-Billet shifter, installed (does not include handle) see page 24 for shifter handles, which are sold separately FORD TOPLOADER TRANSMISSION WITH JERICO GEARS The ultimate in stealth racing transmissions. We take stock Ford Toploader cases, specially machine them, and then install Jerico internal components. The end result looks stock, but has a complete 100% Jerico-built, straight cut, dog ring style transmission inside. Virtually undetectable, built to order and available exclusively from Cobra Automotive. Has the same input and output as a regular Jerico. (pictured with optional Pro-Billet shifter installed) 100-RRT-1 Jerico racing transmission in stock Ford iron cases JER-491-0500-0 Hurst Pro-Billet shifter, installed (does not include handle) see page 24 for shifter handles, which are sold separately JER-MSTK-AO Additional for Jerico roller main shaft option FORD TOPLOADER TRANSMISSION These rebuilt Ford Toploaders are race prepared. The close ratio gears have been honed for more oiling and premium bearings are installed. Pro-Billet shifter, sold separately, can be adapted to fit. 100-RRT-2 Ford Toploader Trans, SB, 1-1/16” 10 sp Input, 28 sp output 100-RRT-3 Ford Toploader Trans, BB, 1-3/8” 10 sp Input, 31 sp output COMPETITION PRO-BILLET SHIFTERS If you are looking for a shifter that will give you crisp super fast shifting, look no further. Fits both Toploader and Jerico transmissions. Includes Hurst Pro-Billet shifter head, aircraft quality 5/8” aluminum rods, 3/8” adjustable rod ends and ¼” thick Jerico side levers. Provides smooth movement without flexing to help eliminate missed shifts under racing conditions. Features press down reverse lock out, reverse is located over and back. Not a “bolt-on”. Must be adapted to each specific application, components available individually. Shift handle must be purchased separately. JER-491-0500 Hurst Pro-Billet shifter kit ONLY w/shifter rods and heim joints DIRECT CONNECT SHIFTER FOR JERICO TRANSMISSION Jerico’s Direct Connect internal shifter option is the ultimate in smooth, jam free operation. The rail type, integral linkage, eliminates deflection for more positive shifts. Features press down reverse lockout; reverse is up and to the right. This upgrade includes the roller tailshaft bushing and requires a special slip yoke. Shift handle purchased separately. JER-HTINTSHL-O Additional for Jerico Direct Connect internal shifter option JER-HTINTSHL-O shifter pictured installed ROLTEK T-10 RACING TRANSMISSIONS We offer 3 different T-10 transmissions. All are built for Chevy applications, so are modified for use with Ford bellhousings. A conversion pilot bearing must be used for Ford cranks. The Stock version has a provision for a speedo. The Modified (racing) version features rollerized 1st, 2nd and 3rd gears, a special mainshaft, hubs, and bearings, but NO provision for a speedo. T-10 feature’s Dog-ring type design for clutchless operation with lightening speed, using special 9310 nickel alloy gears. These are race-proven for reliability under the most extreme conditions. (Optional gun-drilled mainshaft and REM treatment available) ROL-TRANS-T10S ROL-TRANS-T10M ROL-SYNC-RING ROL-TRANS-T10R ROL-RT-WELD-CASE ROL-SH-LNG-WIN-SH ROL-SH-HURST-SH sales: 203-284-3863 Roltek T-10 Stock Trans, brass synchros, w/speedo Roltek T-10 Modified Trans, brass synchros, no speedo Additional for steel banded syncro Option, each, 4 required Roltek Racing T-10 Trans, dog ring style, clutchless Additional for modifications to fit Ford bellhousing Additional for Long shifter, rail type, handle sold separately Additional for Hurst Super Shifter, handle sold separately email: sales@cobraautomotive.com 23 www.cobraautomotive.com Rev051112 DRIVE TRAIN HURST COMPETITION PLUS SHIFTER Replace that worn-out stock Ford shifter with a Hurst Competition Plus shifter. A favorite for over 3 decades these shifters feature heavy duty construction for years of trouble free use. Enjoy the more positive shifts that a Hurst shifter is famous for. A nice upgrade for your street car and very period correct for a restoration that will be driven. Fits w/ or w/ out console. 293-3180 1965-70 Mustang/Shelby Toploader or T-10 SB or BB & 1966-67 Falcon Toploader, shifter w/integral handle H3918787 1963-65 Falcon 8 cylinder w/T-10, shifter head Only (No handle) H3918789 1963-65 Falcon 8 cylinder w/T-10, shifter w/integral handle H2480003 Switch, Back Up Light for Hurst Competition Plus Shifter Assemblies HURST COMPETITION SHIFTER HANDLE These chrome plated shifter handles are constructed from high strength steel and stamped with the Hurst name. Supplied with 3/8”-16 threads to attach the shift ball and 2 mounting holes that are 3/8” diameter and 7/8” center to center. H5386836 11.16” tall, 4.12” set-back, .88” offset (fits Jerico or Toploader trans 1965-70 Mustang) H5387236 11.12” tall, 2.25” set-back, zero offset (fits Jerico or Toploader trans 1965-70 Mustang) H5387991 9.82” tall, zero set-back, 1.2” offset H5380015 8” tall, 3” set-back, zero offset H1540071 Hardware kit for Hurst bolt on handle (stick bolts & stop bolts) HURST COMPETITION SHIFTER HANDLE #H5386836 HURST COMPETITION SHIFTER INSTALLATION KIT Kit includes heat treated linkage rods and arms, all required hardware and mounting plate. H3737637 1965-70 Small Block Mustang / Shelby w/Toploader H3735587 1967-70 Big Block Mustang / Shelby w/Toploader H3733164 1963-65 Falcon 8 cylinder w/BW T-10 H3737638 1966-67 Falcon 8 cylinder w/Toploader H3327302 Steel replacement bushing kit H1630003 Hurst White classic shift ball 4 sp 3/8”-16 H1630103 Hurst Black classic shift ball 4 sp 3/8”-16 H1630002 Hurst White classic shift ball 4 sp, 3/8-24 HURST COMPETITION SHIFTER INSTALLATION KIT TOPLOADER TRANSMISSION REBUILD KIT We have put together a complete overhaul kit manufactured of the best parts available with everything you need. Kit includes: all synchros, seals, roller bearings, gaskets, small parts kit, snap rings, bushings, needle bearings, springs, thrust washers, etc. Upgraded Jerico style super rolling main case bearings are standard in our kits for those who want to go racing. Fits large and small spline transmissions. For street or track, this is the best kit on the market! 100-BK296 Toploader Master Rebuild Kit 239-2307 Gasket, transmission topcover, for 4-speed Toploader TOPLOADER TRANSMISSION REBUILD KIT POLYURETHANE REAR TRANSMISSION MOUNT This nearly indestructible Polyurethane transmission mount is strong like a solid metal mount without the vibration and noise. Designed to limit unwanted movement, control torque and transmit as much power as possible to the wheels where it belongs. Molded in black with corrosion resistant plated finish. PRO6-1605 1965-73 Mustang w/Toploader & 1966-68 Falcon w/Toploader POLYURETHANE ENGINE MOUNT SET These nearly indestructible Polyurethane engine mounts are strong like solid metal mounts but will not transmit as much vibration and noise. Designed to limit unwanted movement, control torque and transmit as much power as possible to the wheels where it belongs. The heavy duty construction of these mounts prevents damaging engine movement and reduces the possibility of breakage. Polyurethane is resistant to oil and chemicals and will not deteriorate like rubber mounts. Molded in black with a corrosion resistant plated finish. (Requires the use of 1966-70 frame brackets, Will Not Fit Factory Type Hi-Po Exhaust Manifolds) PRO6-6503 Motor Mount set, Steel-Poly OE type, 289-302-351W, Mustang 1965’70, Falcon 1966-’68 (pictured) 100-2286 Motor Mount set, Race Prepped OE type, through-bolted rubber, 289302-351W, Mustang, Nov.’65 to 1970 TCP1 Motor Mount set, Steel-Poly, adjustable race type, 289-302-351W, Mustang 1965-70, Cougar 1967-’70 TCP2 Motor Mount set, Steel-Poly, adjustable race type, 390-427-428, Mustang & Cougar 1967-’70 sales: 203-284-3863 email: sales@cobraautomotive.com 24 PRO6-6503 www.cobraautomotive.com Rev051112 DRIVE TRAIN QUARTERMASTER RACING BELLHOUSING This new, cast aluminum, bellhousing is just the thing for replacing that tired 40 year old stock part. Precision CNC machined to the close tolerances required in racing applications and checked for concentricity and parallel mounting surfaces. Accepts 157 tooth flywheels and will work with stock or mini starters. Acceptable for competition use when combined with our Tilton button style racing clutches. Must be machined to mount Tilton hydraulic release bearing and can be adapted to use stock type mechanical release arm for OE type clutches. Use in conjunction with our laser cut replacement block plate. 110302 Bell Housing, SB Ford CA7007 Block Plate, SB Ford, 157 tooth application, laser cut FLYWHEELS Made from Top quality billet steel or aluminum, properly balanced for the optimum performance you need. SFI Approved (164 tooth SB also available). 293-700220 25 lb Steel, 289-302-351W, 157 tooth ring gear, 28 oz balance 293-700225 25 lb Steel, 289-302-351W, 157 tooth ring gear, zero balance - 10.4” bolt pattern 293-900220 12 lb Aluminum, 289-302-351W, 157 tooth ring gear, 28 oz balance 293-900232 13 lb Aluminum, 289-302-351W, 157 tooth ring gear, zero balance 293-700260 30 lb Steel, 390-427, 184 tooth ring gear, zero balance 293-700270 29 lb Steel, 428, 184 tooth ring gear, 28 oz balance 293-900260 18 lb Aluminum, 390-427, 184 tooth ring gear, zero balance 293-900270 18 lb Aluminum, 428, 184 tooth ring gear, 28 oz balance PERFORMANCE CENTERFORCE DUAL FRICTION CLUTCHES These diaphragm style pressure plate and clutch disc sets are designed with a dual purpose in mind. The clutch disc is lined with two different compounds. One side gives smooth clutch engagement for ease of performance street driving while the other side has a more aggressive compound and will withstand the abuse of competition. These clutches can increase the holding capacity as much as 90% over a stock clutch setup. The diaphragm design gives a nice, easy pedal feel with out the need for typical clutch linkage reinforcing. Installs like a stock type unit with out any modifications. 279-490030 10” x 1-1/16” 10 spline 1965-73 289-302 SB Ford 279-700000 11” x 1-1/16” 10 spline 1969-73 351 SB Ford 279-226033 1” x 1-1/16” 10 spline 1967-69 390 BB Ford (use SB T/O brg) 279-559033 11” x 1-3/8” 10 spline 1968-70 427- 428 & 1971 429 BB Ford 279-161057 10” x 1-1/8” 26 spline for SB Ford w/ Jerico or Roltek racing Trans 279-N1439 SB Ford throw out bearing 279-N1493 BB Ford throw out bearing FLEXPLATES FRA203 529615 529618 FRA224 Flexplate, Ford 289-302, 28 oz balance, 157 tooth Flexplate, TCI, SBF, SFI Approved, zero balance, 157 Tooth Flexplate, TCI, SBF, SFI Approved, 28 oz balance, 157 Tooth Flexplate, Ford 428 CJ Only, 184 tooth TILTON RACING CLUTCHES These small multi-disc clutch setups greatly reduce rotating weight and offer instant lock up with metallic lined solid clutch discs. Easy to maintain and almost indestructible, these Tilton button flywheel style clutches mount to an automatic flexplate and allow you to use your stock bell housing and starter. A mechanical throw out bearing utilizing standard clutch linkage can be used or a more driver-friendly hydraulic throw out bearing. No need for a heavy scatter shield, much quicker throttle response and increased braking capability due to reduced momentum when the throttle is lifted. (Full race applications only) TIL-56157 7 1/4” double disc clutch for Toploader 10 spline (S/O) TIL-56281 7 1/4” triple disc racing clutch for Jerico 26 spline (S/O) TIL-56282 7 1/4” double disc racing clutch for Jerico 26 spline (8 Rivet) TIL-57281 5-1/2” triple disc racing clutch for Jerico 26 spline (S/O) TIL-61-027-2 Release Bearing, mechanical, double or triple disc (S/O) TIL-61-401 Release Bearing, Hydraulic, Std. 10-1/2” clutch TIL-61-402 Release Bearing, Hydraulic, 7-1/4’’ clutch, double disc TIL-61-403 Release Bearing, Hydraulic, 5-1/2’’ clutch, triple disc (S/O) 10,000 RPM STOCK APPEARING 10-1/2” RACING CLUTCHES These “Stock Appearing” racing clutches are for use when the rules prohibit small multidisc clutch setups. We offer two versions; both come complete with pressure plate, clutch disc for 1-1/8” x 26 spline input and a 9 lb flywheel with 157 ring gear teeth. The Lightweight version tips the scales at just 22.5 lbs total. The Ultra-Lite version weighs even less at 21 lbs total. Strictly for race use, they are custom built to order and can not be returned therefore exact specs must be given to assure the unit is built correctly for your application. RPM-9311-10.5 Clutch, 10-1/2” Lightweight 22.5 lbs RPM-9411C-10.5 Clutch 10-1/2” Ultra-Lite 21 lbs w/Kevlar Disc sales: 203-284-3863 email: sales@cobraautomotive.com 25 www.cobraautomotive.com Rev051112 DRIVE TRAIN HYDRAULIC CLUTCH KIT Our hydraulic clutch kit includes a Tilton release bearing, ¾” bore clutch master cylinder and billet aluminum firewall adapter plate as pictured. The adapter plate mounts brake and clutch master cylinders side by side while strengthening the critical firewall area. You will get a much smoother, driver friendly, clutch pedal feel when installing a hydraulic throw out bearing. Reduces the harshness of the instant lock up smaller diameter racing clutches. We can also machine your OE or Quartermaster bellhousing to mount the Tilton hydraulic release bearing for an additional charge. 100-74755 for 7 ¼” Tilton dual disc clutch 100-74760 for 5 ½” Tilton triple disc clutch 100-74765 for 10 ½” OE type diaphragm clutch 100-74750 Firewall adapter plate only fits 1965-66, requires adjustable brake push rod MECHANICAL CLUTCH LINKAGE KIT This high performance clutch linkage uses the stock pivot points and retains the OE appearance with greatly improved strength and operation. The TIG welded Z-bar features a CNC machined pivot tube with spherical bearings and the linkage rods are fully adjustable with high quality 3/8” rod ends. For FIA spec cars we offer the 1965 rollerized Z-bar only with bronze bushings to accept factory linkage rods, will not fit Hi-Po cast iron exhaust manifolds. MB-2001 1965-66 289-302 Mustang except Hi-Po MB-2002 1967-70 289-302-351W Mustang & Cougar MB-2003 1967-70 390-427-428 Mustang & Cougar MB-200X 1965-66 FIA spec rollerized Z bar only COMPETITION DRIVESHAFTS If you have ever experienced a driveline vibration at high speed you will appreciate a properly designed driveshaft for the job. The driveshaft is a very important part of the driveline and the only thing connecting the power plant to the rear wheels of the car. Here, at Cobra Automotive, we know about critical driveshaft speed and its affects on your car. Every driveshaft is custom made to order in steel, complete with U-joints and slip yoke to fit your application. Aluminum units are also available. Please call and speak to a Cobra Automotive representative for assistance. 285-STS Street driveshaft 3” diameter steel 285-STC Race driveshaft 3-1/2” diameter steel COMPETITION DRIVESHAFTS TRANSMISSION YOKES TRANSMISSION YOKES These driveshaft slip yokes are the same, high quality, American made parts that we use for racing and/or street use. 285-2-3-10791X 32 spl, Jerico trans, fits 1330 U-joint JER-1350YMW 32 spl, Billet, Jerico Roller tailshaft trans, fits 1350 U-joint 285-3-3-4261X 32 spl, Jerico trans, fits 1350 U-joint 285-2-3-10831X 32 spl, Tex/Roltek trans, fits 1330 U-joint 285-F681330M 31spl, BB Toploader & C6 trans, fits 1330 U-joint 285-2-3-5981X 28 spl, SB Toploader& T5 trans, fits 1330 U-joint 285-2-3-4271X 28 spl, SB Toploader, fits 1310 U-joint DRIVESHAFT SAFETY LOOP Driveshaft safety loops are required by most competition sanctioning bodies and are a good idea for any high performance application including street use. This one piece unit is designed to fit the floor pan of the 1965-67 Mustang. The ring is made from seamless DOM steel in an oversize dimension to accommodate lowered vehicles and aftermarket driveshafts. The flanges are laser-cut from heavy-duty steel and the assembly is precision welded in a fixture. Instructions and Grade 8 hardware included. Finished in black powder coat. We also offer a universal, adjustable, 4 piece loop to fit most vehicles. Includes hardware and finished in Zinc plating. MDL-6000 1965-67 Mustang, one piece, pictured 18000 Universal style, multi piece DRIVESHAFT SAFETY LOOP PINION YOKES This is the same heavy duty forged pinion yoke we use on our own race cars. It has 28 splines and accepts a 1330 series U-joint. Direct replacement for the discontinued Ford Motorsports part # M-4851-A. DTS-EY1330-9010 Ford 9”, fits 1330 U-joint sales: 203-284-3863 email: sales@cobraautomotive.com 26 www.cobraautomotive.com Rev051112 DRIVE TRAIN COMPETITION U-JOINTS AND U-BOLTS We carry the Spicer brand SDO solid racing U-Joints, which are also used in our racing driveshafts. By deleting the grease fitting hole, an inherent weak point is eliminated in the “cross” of the U-joint. Precision machined to very high tolerances to remove vibration causing play. Note # 285-5-648X is NOT solid. 285-5-785X U-Joint 1310, 3-1/4” spread X 1-1/16” cap 285-1-0134BF U-Joint 1310 to 1330 conv, spreads 3-5/8” & 3-1/4” caps 1-1/16” 285-5-790X U-Joint 1330, 3-5/8” spread X 1-1/16” cap 285-5-792X U-Joint 1330SP conv, 3-5/8” spread, caps 1-1/16” & 1-1/8” 285-5-648X U-Joint, 1330 to 1350 conv, 3-5/8” spread, caps 1-1/16” & 1-3/16” 285-5-799X U-Joint 1350, 3-5/8” spread X 1-3/16” cap 285-2-94-28X U-Bolt kit, 1310 & 1330 caps 1-1/16” 285-2-94-58X U-Bolt kit, 1330SP caps 1-1/8” 285-3-94-18X U-Bolt kit, 1350 caps 1-3/16” 9” FORD CENTER SECTIONS Dana 44 Cobra Center Section We offer custom-built “bolt in” units, with your choice of gear ratios, aluminum or iron cases, Detroit Lockers, various posi units and spools for 28 or 31 spline axles, single or double ribbed nodular iron case, aluminum or iron pinion supports and companion flanges. Listed below are several complete assemblies with gears, all of which can be upgraded with the NASCAR pinion bearing, safety wired ring gear bolts and lightened and/or REM treated gears. NOTE: Tru-Tracs require specific axle lengths, so please call and speak to a Cobra representative for assistance. 100-GEAR-TL Trac-Lock, 31 spl. S casting single ribbed carrier & pinion sup, 1330 U-joint 100-GEAR-TT True-Trac, 31 spl. S casting single ribbed carrier & pinion sup, 1330 U-joint 100-GEAR-DL Detroit Locker, 31 spl. S casting single ribbed carrier & pinion sup, 1330 U-joint 100-GEAR-N-TL Trac-Lock, 31 spl. double ribbed carrier w/Daytona pinion sup, 1330 U-joint 100-GEAR-N-TT True-Trac, 31 spl. double ribbed carrier w/Daytona pinion sup, 1330 U-joint 100-GEAR-N-DL Detroit Locker, 31 spl. double ribbed carrier w/Daytona pinion sup, 1330 U-joint 100-GEAR-A-TT True-Trac, 31 spl. Aluminum carrier and pinion sup, 1330 U-joint 100-GEAR-A-DL Detroit Locker, 31 spl. Aluminum carrier and pinion sup, 1330 U-joint F-598 Differential mtg. nut kit, OE style nuts w/copper washers (10 ea) RDS-55074 Gasket, Rear End Carrier, 9” Ford 83-1011 Bearing & seal kit (small bearing housing) 83-1038 Bearing & seal kit (large bearing housing) DANA 44 COBRA CENTER SECTIONS These new aluminum Cobra rear end assemblies come with a True-Trac unit. Weighing about 30 lbs less than an original unit, they are supplied with upgraded 30 spline axles. Just like the original units, they will fit both 289 and 427 Cobras. Light weight billet aluminum mounting brackets are available separately. KIR-Alum-CS Rear end assembly w/True-Trac KIR-ALUM-CS-B Mounting brackets, 3 pc. set (2 upper & 1 lower) 100-DL931 9” DIFFERENTIALS Differentials are available from Cobra Automotive in several types to suit any application. Trac-Lock posi-units are perfect for hot street to moderate competition use and incorporate a clutch style mechanism to do the job. True-Trac units can be used for all out competition or street use, their helical gears distribute torque to both rear wheels constantly without freewheeling and ratcheting, for example 20% to the inside tire & 80% to the outside tire while in a turn. The Detroit Locker is still the choice of many for all out racing because of its all steel locking ratchet mechanism. Today’s new Detroit Lockers are far quieter and more streetable than the older models. All differentials are available in either 28 or 31 spline. 100-TL928 Trac-Lock, 28 spline 100-TT931 True-Trac, 31 spline 100-TL931 Trac-Lock, 31 spline 100-DL928 Detroit Locker, 28 spline 100-TT928 True-Trac, 28 spline 100-DL931 Detroit Locker, 31 spline 100-TT931 RING & PINION GEAR SETS REM Treatment Shown sales: 203-284-3863 These ring and pinion gear sets are computer designed, precision CNC machined and heat-treated to ensure the highest quality possible. We offer the quietest aftermarket gear sets on the market. Available in any gear ratio for street or race. Please specify gear ratio and application when ordering. Optional REM treatment and/or lightening available. 100-RP9 Ford 9” (Base part #, please specify ratio) 100-RP8 Ford 8” (Base part #, please specify ratio) DTS-REM REM treatment, ring & pinion, upgrade DTS-Lighten Lighten ring & pinion, upgrade email: sales@cobraautomotive.com 27 www.cobraautomotive.com Rev051112 DRIVE TRAIN 9” REAR END HOUSINGS Cobra Automotive will fabricate a Ford 9” rear end for any application, either for competition or street use. These are made with all new heavy duty components, including 3” axle tubes, 7/16-20 vent hole, Torino style ends with 3.150” tapered roller bearings, and spring perches. Options can include internal baffles, jacking bung, drain plug, fill plug, traction bar brackets, and relocated axle vent. For 28 or 31 spline axles, made to any width needed. We can also supply complete axle assemblies with your choice of gears and brakes; ordering a rear end complete with axles will ensure proper length and fit. You may specify 3” race studs or stock length studs. All axles are by Moser Engineering. NOTE: True-Tracs require specific axle lengths, so please call and speak to a Cobra Automotive representative for assistance. 100-RE100N-OEM Housing w/31 spl. axles, Std Duty OE round banjo, Torino ends, 3.150” roller bearings 100-RE100N-HVY Housing w/31 spl. axles, HD reinforced banjo, Torino ends, 3.150” roller bearings 100-REH-OEM Housing Only, Std Duty OE round banjo, Torino ends, with perches 100-REH-HVY Housing Only, HD reinforced banjo, Torino ends,with perches 100-RE-DRAIN Drain plug, flush mount 100-RE-FILL Fill plug MOSER ENGINEERING HEAVY DUTY AXLES We rely on Moser Engineering axles, whether for high-performance street or all-out racing. These axles are made of forged alloy steel, then induction heat treated and magnafluxed. Custom axles are made for any application, length, or bearing size. Axles can be ordered with standard OE-style studs to replace original 35-40 year old units that have been stressed for many years. All axles come complete with pressed-on bearings, heavy duty flange plates and competition 3 inch studs. Please specify 28 or 31 spline axles. NOTE: True-Tracs require specific axle lengths, so please call and speak to a Cobra representative for assistance. 218-100-C Axles, Ford 9”, Custom length w/3.150 tapered bearings, 3” studs 218-100-S Axles, Ford 9”, Stock length (specify year) 2.835 bearings, stock studs 218-8000 Wheel stud, ea, screw-in w/lock washer, 1/2”-20 x 3” AXLE BEARINGS & SEALS Federal-Mogul Axle Bearings and their National brand Oil Seals have been trusted names in the automotive replacement parts business for over 50 years. These are the same premium quality parts we run in our own race cars as well as used in our restorations. RW207CCRA Bearing, 2.835” OD, 1.387” ID for stock 65-73 Ford axles RW902R2834-1.531” Bearing, 2.835” OD, 1.531” ID (Green Bearing) RW902R2834-1.562” Bearing, 2.835” OD, 1.562” ID (Green Bearing) A20 Bearing, 3.150” OD, 1.562” ID tapered roller for Torino flange NAT51098 Seal, Ford old style large bearing NAT51322 Seal, 64-66 Mustang w/8 cyl NAT9161 Seal, 67-70 Mustang ALL w/WCY NAT3195 Seal, for A20 tapered roller bearing, Torino flange NAT9363S Seal, 69-73 Mustang ALL w/1-1/2” shaft, 31 spl ex WCY NAT9569S Seal, 67-73 Mustang ALL w/1-3/8” shaft, 28 spl ex WCY 318-4300G RACING LUG NUTS Our open style, competition, lug nuts measure 2-1/2” long with ½” x 20 threads and are made of 12L14 steel and bright nickel-plated for durability. The tapered design fits later generation American Racing Torque Thrust wheels with tapered seat. Also available with the shouldered neck and washer for original and older American Racing rims. 318-4300G Tapered seat set of 20 (pictured) 234-4301G Shouldered seat set of 20 w/washers 234-4301G COMPETITION WHEEL STUDS These race quality extra long wheel studs are 3” long with an unthreaded “bull nose” tip for quick installation of lug nuts. Made of heat treated 8740 chrome moly steel they have a tensile strength of 200,000 psi. This enables them to handle the shear and lateral loads found in competition applications. Must be used with open style lug nuts or they can be cut down to accommodate standard “Acorn” style lug nuts. Yellow cadmium plated. 100-7703 Studs (5 pc set) for OE rear axles with press in studs or Cobra Automotive billet front hubs sales: 203-284-3863 email: sales@cobraautomotive.com 28 www.cobraautomotive.com Rev051112 ENGINES THE COBRA AUTOMOTIVE I.D. TAG Every Cobra Automotive engine is meticulously documented. Accurate records are kept that record the details of every component used in its assembly. In addition to identifying the engine with its serial number, each tag provides the valve lash data. COBRA AUTOMOTIVE ROAD RACE ENGINE There’s nothing like being behind the wheel of a car powered by a maximum-horsepower road race engine. The Cobra Automotive Road Race Engine pictured here starts with a Dart block that is specially CNC-lightened using our own proprietary program. We then bore the cam tunnel for 55 mm rollerized cam bearings and the entire inside of the block is deburred. We use only the best customforged racing crankshafts, made especially for road racing, and smaller low-friction Honda rod pins, while retaining the standard small block Ford main bearing diameters and widths. Custom steel billet Oliver connecting rods are mated with JE dome pistons using special tight-tolerance stainless steel rings. Our cylinder head CNC porting program is very aggressive, and we finish off the porting operation with a thorough hand polishing to assure we get every last CFM of airflow from the intake and exhaust ports. Jesel splitratio Pro Series shaft-mounted rockers finish the valve train to keep the engine pulling hard all the way to its 8500 rpm redline. We have both dual and single plane intake manifolds available for these engines, featuring more porting than anyone can imagine. On an engine this sophisticated, the stainless steel “stepped” headers are an absolute must if you want to squeeze every last bit of horse power out of this engine and stay in front of the competition. Every Cobra Automotive Road Race Engine is built with the latest technology in wet sump oiling including, specially modified oil pumps and custom-built aluminum oil pans. Naturally, we use only the best ARP hardware and Race Series Fel-Pro gaskets. In full competition trim, this engine makes 580 horsepower. BOSS 302 331” STROKER ENGINE The BOSS 302 engine is still as desirable today as it was in the late 60’s and early 70’s. Pictured here is a Boss 302 based engine with Cobra Automotive upgrades. It’s built with a new Ford Racing Boss 302 block and Scat forged steel crank, for 331 cu. in. We balance the rotating assembly and degree the solid roller camshaft to complete the shortblock. The original Boss heads are ported and modified for maximum flow. We install Jesel rocker shaft assemblies and Comp Cams valve springs & hardware for the best possible valve train control and overall reliability. The entire motor is assembled with ARP hardware and to provide the best spark, we use a billet MSD distributor and MSD 8.5 mm ignition wires. We also fit a Bud Moore oil pan to give it a trans am racing look. To complete this street-drivable engine, we fit it with a custom set of stainless steel “flat four” Bud Moore headers like the ones used in his original race cars. On the dyno, this engine produces 475 horsepower on pump gas. It can be dropped right into your high performance street car as soon as it arrives. Shipped complete and ready to run. The engine at left was built with four Weber 48 IDA carburetors on a manifold supplied by the customer. Our standard Boss stroker is equipped with a Holley four barrel, unless otherwise specified. sales: 203-284-3863 email: sales@cobraautomotive.com 29 www.cobraautomotive.com Rev051112 ENGINES 289 FIA COBRA ENGINE Finishing first in a vintage FIA race starts with a Cobra Automotive 289 FIA-legal road race engine like the one pictured here. Using a magnafluxed and correctly date-coded C5AE original Ford block as our foundation, we build the highestquality Cobra race engine available anywhere. The block is cryogenically treated for added strength, and is fitted with Cobra Automotive’s FIA race-quality repro Hi-Po iron main caps. The rotating assembly consists of a custom forged race crank with hollow small rod journals and undercut & lightened counterweights. Linking the crankshaft to the custom JE pistons is a set of custom-machined, forged steel Oliver connecting rods fitted with tool steel lightweight wrist pins. Finally, neutral-balancing of the entire rotating assembly ensures maximum smoothness and high-rpm reliability. We port-and-polish an original set of ‘65 289 heads to our own exacting standards, which are completely prepped for racing. There is a custom-ground, fast-ramped camshaft, and tool steel lifters with bottom oiling holes to operate titanium intake and exhaust valves with 8 mm stems. “Beehive” springs and titanium retainers, working with the race-prepared stock-style rockers, will keep the valve train working without failure. A race-ported Weber intake with four fully-prepped 48IDA carburetors provide maximum power and reliability for our dyno session. If squeezing every last bit of horse power out of this winning combination is what you’re looking for, then adding a set of Cobra Automotive’s custom stainless steel tri-y headers is an absolute must. 331 CU. IN. GURNEY-WESLAKE ENGINE There are not many engines as impressive looking and sounding as a Gurney-Weslake engine. The engine pictured here was built for a SuperFormance GT40. We started with a new Ford Racing BOSS 302 block and added a Scat forged steel crankshaft with a set of Scat forged steel H-beam connecting rods, then fitted SRP aluminum pistons that were modified for use with the Gurney-Weslake cylinder heads. The rotating assembly was balanced and an aggressive mechanical camshaft was selected and degreed, to achieve maximum performance and reliability for street use. Custom port work with a customized Gurney-Weslake valve train complete the cylinder heads, which are bolted to the block with very special, custom-stepped ARP head studs. We fitted a one-piece intake valley cover with water lines to eliminate the 3 piece system that was always problematic. The Weber induction system helps give this engine the look and power they are famous for. This engine makes over 480 horsepower on the dyno...imagine it in your car. sales: 203-284-3863 email: sales@cobraautomotive.com 30 www.cobraautomotive.com Rev051112 ENGINES DUAL CARB BIG BLOCK There is nothing more graceful looking than a fully trimmed out 427 Ford Wedge engine! When Cobra Automotive first started, we were all about the FE Ford power plant. This was our first love. Pictured here is a nicely done 427 Sideoiler with Edelbrock aluminum heads and water pump, Canton oil pan, Billet SFI approved 427 balancer, Blue Thunder 2 x 4 bbl Medium Riser intake, Cobra Automotive chrome Pent Roof valve covers and topped off with a pair of Holley 660 cfm carburetors. Whether the application is for a killer Cobra or for a show winning Shelby Mustang we can fill your engine compartment with just the right combination to meet your desires. More good components are available today for these engines than ever before and this means we can provide the best engines available since this flagship Ford High Performance engine was introduced in 1958. From a single 4 bbl 428 cu. in. engine, to a fire breathing twin Paxton supercharged 427, we have many years of experience to offer you when it is time for you to pick one for your car. Horsepower numbers from 400 HP to 700 HP are common place with our engines. Speak to our engine department for one of these engines! TWIN PAXTON SUPERCHARGERS IN YOUR CAR This is what 700 Horsepower on pump gas looks like. A Cobra Automotive exclusive installation, this setup is for the performance enthusiast who wants the ultimate in stealth performance. These kits are made to fit under the hood and are available for most replica Cobras, Shelby Mustangs and even original Cobras. Our first one was unleashed on the streets of America in 1985 and over the years, continuous development has refined the installation as well as its performance. Pictured here is a 427 Medium Riser in a 1967 Shelby GT500 that made 705 HP on the dyno (thru the mufflers) on pump gas. Imagine all that hardware under the hood of your car, with docile street manners. Contact us with your application. Custom-built setups can be designed for other applications as well. TWIN PAXTON KIT Pictured here is a typical Mustang setup with polished superchargers and carburetor caps. Kits are available in various configurations that include original blue Cobra-labeled superchargers and black wrinkle carburetor caps or polished superchargers and caps. Any combination of available finishes can be supplied as well. Custom setups can be built on request. Here are a few typical applications: • Twin setup for Mustang body style and FE big block. • Twin setup for Cobra body style and under hood use with FE big block. Fits most Cobra replica’s as well. • Original high mounted style twin Cobra setup for use with special hood and FE big block. This is a copy of the original twin supercharger setup Shelby American built for the AC Cobra in the 60’s. 100-DPK-1000 sales: 203-284-3863 email: sales@cobraautomotive.com 31 Twin Paxton Kit www.cobraautomotive.com Rev051112 ENGINES - SERVICES A COMPLETE ENGINE CENTER Block Machining: Cobra Automotive can machine your block and work with you to maximize your engine combination. We are fully experienced with all categories of engines, from stock restorations to competitive racing engines. We offer a wide variety of machining options for blocks, heads, intakes, and internal engine parts. Advanced machining techniques can not only increase engine power through reduced frictional losses, but also add to component life as well. We specialize in balanced-and-blueprinted engines and all associated services. Component Lightening: We offer machining on engine blocks and components, including the main caps. This provides weight savings while keeping material where it is needed for structural integrity, rigidity, and strength. Weight reduction of between 15-20 lbs. on a fully machined small block and main cap assembly is typical. We also offer specialty crankshaft machining, such as stroking / de-stroking, lightening, and ‘knife edging’ of counterweights for reduced drag and oil windage. Cryo Treating: The cryo treatment process uses sub-zero temperatures down to -300º F to modify and promote a more uniform micro-structure of the material. Benefits include: Longer life due to reduced wear, less failures due to cracking of stress lines, and a reduced coefficient of friction on polished metals. The following components are commonly cryo treated: Camshaft: Increases wear resistance of the cam lobes and reduces the tendency of camshaft breakage Connecting Rods: As with all treated parts, increases fatigue life and equalizes hardness. Crankshaft: Reduces wear on journals, and stabilizes the crankshaft to prevent distortion and breakage due to heat and vibration. Cylinder Head: Strengthens the head and reduces wear on valve seats and guides, and helps prevent warping of the head due to heat and vibration. Heads become more resistant to detonation. Engine Block: Reduces cylinder wear and distortion caused by vibration and heat, stabilizes the block, and equalizes material hardness. This makes better machined surfaces. Ideally, treatment should be done before final machining. Valve Springs: Greatly increases the spring life and reduces the loss of spring pressure. Racing customers report over seven-times the life. Rocker Arms: Reduces breakage, flex, and wear. Ring and Pinion Gears: Reduces wear and tooth breakage, greatly increases life. Brake Rotors and Drums: Equalized hardness prevents distortion and wear, and helps prevent cracking. Mag and Sonic Testing: Magnetic particle inspection is the most definitive method of detecting cracks and imperfections in any ferrous engine part. We can magnaflux your block, heads, crank and camshafts for cracks and flaws. If a crack or flaw is present, we can identify and repair it, or suggest replacement if necessary. Pressure Testing: We can pressure test blocks and heads to double check for pin holes after magnafluxing has been completed. Cracks and defects not detected by magnafluxing are found at this time. The second process ensures integrity of the parts used in your engine. These testing procedures reduce costs related to breakage or failure by identifying sub-par components prior to performing expensive machining procedures. High Tech Coatings: Special coatings provide added performance and protection and greatly extend service-life by reducing engine damage from heat and lubrication-related failures. That translates directly into cost savings. Another benefit from the use of coated parts is the performance gain from reduced friction and optimized heat management. Coatings can be used for heat dissipation or heat containment; examples of benefits are cooler intake temperatures, reduced oil temperatures, and reduced under hood temperatures. Oil-shedding coatings can be used on crankshafts, rods, blocks, windage trays and oil pans to aid the return of oil to the sump and reduce drag on the rotating assembly. Intake charge temperatures can be reduced to increase power by applying a black heat dissipating coating to the outside of an intake manifold and a white heat reflecting coating to the underside. Friction-reducing coatings are used on “wear” surfaces such as crank and rod bearings, piston skirts, and oil pump internals. Other special coatings can be applied to piston crowns for more efficient combustion, and inside and outside of exhaust headers for better flow and heat management. sales: 203-284-3863 email: sales@cobraautomotive.com 32 www.cobraautomotive.com Rev051112 ENGINES - BLOCKS DART 302 BLOCK Dart Iron Eagle Sportsman engine blocks are Cobra Automotive’s choice for our vintage road race engines which are currently making just under 580 horse power and are being shifted at 8,000 RPM. These blocks can take the punishment, make the power, and are totally reliable under the most extreme conditions. Siamesed cylinders with ductile iron sleeves prevent cracking and offer excellent ring seal. Includes ductile iron main caps, 2 bolt front and rear with 4 bolt interior caps. The rear main cap uses a standard one-piece seal. Other features include an upgraded oiling system, reinforced blind-tapped head stud bosses, and extra thick decks. Options include CNC machine lightening of the entire block and machining for optional 55 mm roller cam bearings. DART-31354175 Cylinder block, Dart Iron Eagle Ford Sportsman, 302 mains, 8.2” deck, 4.000” bore DART-lighten block Machine block to lighten (custom special order item) DART-cam55roller Machine block for 55 mm roller cam bearings (custom special order item) DART-32220042-5 Cam bearings, set of 5, coated, 55 mm roller bearing CA-31354175 Cylinder block, race prepped Dart Iron Eagle Ford, lightened & machined for 55 mm roller cam bearings FORD RACING BOSS 302 BLOCK Ford Racing’s BOSS 302 engine blocks are an affordable alternative to the Dart block above and capable of excellent performance and reliability. Engineered to be machined to a 4.125” bore and accept up to a 3.400” stroke, these blocks are capable of 363 cubic inches. Siamesed cylinders with drilled coolant crossover holes along with an upgraded oiling system are just some of the features of this block. Includes 2 bolt front and rear main caps with splayed 4 bolt interior caps. The rear main cap uses a standard one piece seal. Machined with a clutch cross shaft pivot hole this block can be used in applications requiring stock type clutch linkages. M-6010-BOSS302 Ford Racing Boss 302, 8.2” deck, 3.995” bore GENESIS 427 FE BLOCKS IN CAST IRON OR ALUMINUM Genesis 427 FE engine blocks retain the original appearance of the Ford OE 427 side oiler and are capable of excellent performance and reliability. Iron blocks can be machined from 4.120” to 4.440” bore, the aluminum version can be machined from 4.223” to 4.310” and either block will accept up to a 4.500” stroke. The Iron block weighs 230 lbs while the aluminum version is just 118 lbs. Siamesed cylinders with .600” thick decks and extra material added to the crank saddles, pan rails, and cylinder walls are some of the upgrades to this tried & true design. Includes 2 bolt front and rear main caps with cross-bolted interior caps. Castings have the 1965 casting number “CSAE-H” in the OE position and will accept original timing covers, engine mounts and accessory brackets for that period correct look. GEN427-IC-4.240 Cast iron Genesis 427 FE w/cast iron main caps, 10.170” deck, 4.240” bore GEN427-IC-4.370 Cast iron Genesis 427 FE w/cast iron main caps, 10.170” deck, 4.370” bore GEN427-IB-4.120 Cast iron Genesis 427 FE w/billet steel main caps, 10.170” deck, 4.120” bore GEN427-IB-4.240 Cast iron Genesis 427 FE w/billet steel main caps, 10.170” deck, 4.240” bore GEN427-AB-4.240 Aluminum Genesis 427 FE w/billet steel main caps, 10.170” deck, 4.240” bore sales: 203-284-3863 email: sales@cobraautomotive.com 33 www.cobraautomotive.com Rev051112 ENGINES - MAIN CAPS AND CRANKSHAFTS 289 FORD HI-PO MAIN CAPS Cobra Automotive’s reproduction 289 Hi-Po main caps are exact repros, cast and machined right here in the USA from the original Ford blueprints. A set consists of caps numbered 1-4 with the proper style numbers and the arrow facing forward just like the originals. The rear main cap is not included because it is almost identical to the non Hi-Po cap and not cost-effective to machine. Our caps are cast from the highest quality Nodular iron and will fit any 289 block. Bearing bore is .020 undersize and the side registers are .010 oversize on each side for adjustment prior to line-boring. These beautiful caps convert a standard 289 block to a Hi-Po block. 100-289-MAIN CAPS (set of 4) PRO-GRAM ENGINEERING BILLET MAIN CAPS Pro-Gram is the world’s largest manufacturer of aftermarket Billet main bearing caps, providing a superior part in design, manufacture, and material. Made entirely in the USA, these parts are used by all facets of the automotive racing industry, including NASCAR. Adds superior strength and reliability to all 289-302 blocks; adaptable to 2-bolt blocks. F302F 289-302 Front cap only, 2 bolt F302C 289-302 Center caps, set of 3, 2 bolt F302CBoss 289-302-BOSS Center caps, set of 3, 4 bolt F302R Rear cap, 2-bolt early style, fits all 289 and 302 blocks w/2pc. rear main seal EAGLE STREET/STRIP CRANKSHAFTS Cast and forged steel cranks in many stroke combinations, depending on desired cu. in. and usage. Cast cranks are recommended in applications up to 500 HP and are made from tough cast steel unlike factory cranks that are only cast iron. Forged cranks are made from 4340 steel, shot peened and nitrided for use in applications up to 1500 HP. Complete rotating assemblies are also available including crank, rods, pistons, pins, rings, main and rod bearings for anywhere from 302 to 418 cu. in. size kits. Here are a few of the many crankshafts available (please speak to our engine shop to discuss your application). 237-430232505400 Forged 302 3.250” stroke/5.400” rod, 2.100 rod journal 237-430234005400 Forged 302 3.400” stroke/5.400” rod, 2.100 rod journal 237-430234705400 Forged 302 3.470” stroke/5.400 rod, 2.100 rod journal 237-104283980 Cast BB Ford FE, 3.980 stroke, stock rod journal SCAT CRANKSHAFTS These are the cranks we use in all of our full-race motors. Scat offers a stroker crank for virtually any application. The new superior quality Series 9000 cast “standard” and stroker cranks are available for most small blocks and FE engines. Super trick racing cranks made of 4340 steel are available for small block and big block applications in 7-Series Custom Forged or 8-Series Pro Stock Billet configurations. Call our engine shop to discuss the many options that are available such as Aero-wing counter weights, lightening holes, and more. Listed below are just a few of the crankshafts available. The SCAT-1 & SCAT-2 part numbers are for custom cranks that are special-ordered to your specification. 4-302-3000-5090-2123 Standard weight, forged 302/3.000 stroke, 5.090 rod, 2.123 rod journal 7-302-2870-SL-69 Super Light Custom forged Ford SB race, 2.870 stroke, 2.250 mains, 2.123 (Ford) rod journal 7-302X-2870-SL-93 Super Light Custom Forged Ford SB race, 2.870 stroke, 2.250 mains, 1.888 (Honda) rod journal 7-302-2870-SL-94 Super Light Custom Forged Ford SB race, 2.870 stroke, 2.250 mains, 2.000 (Chevy) rod journal SCAT-1 Scat small block Ford crank, (custom, special order) SCAT-2 Scat big block FE Ford crank, (custom, special order) sales: 203-284-3863 email: sales@cobraautomotive.com 34 www.cobraautomotive.com Rev051112 ENGINES - PISTONS, RODS AND BEARINGS OLIVER CONNECTING RODS Oliver lightweight billet rods are the highest-quality and strongest rod we have ever used, and that’s why we use them in every one of our all-out road race engines. They’re available in any desired length and journal size. C5155SVO-SMUL8-SP Custom forged steel, set of 8, light weight, SB Ford, 5.155 long, .912 pin, 1.888 (Honda) big end OLIVER-1 Connecting rods, set of 8, race, custom forged steel, (special ordered) OLIVER-2 Connecting rods, set of 8, street, custom forged steel, (special ordered) CROWER CONNECTING RODS Crower Sportsman connecting rods are the best choice whenever budget or rules won’t allow a billet rod. Made of tough 4340 alloy steel; direct replacement for most small block applications, and reliable up to 500HP/8200 RPM. We also handle Crower custom billet rods and Crower maxi-lite rods. SP91225PF-8 Ford 302 Sportsman, set of 8, 5.155 long, press fit, .912 pin, 2.123 (Ford) big end SP91225B-8 Ford 302 Sportsman, set of 8, 5.155 long, bushed, 912 pin, 2.123 (Ford) big end CROWER-1 Connecting rods, set of 8, race, Custom Billet Steel, (special ordered) CROWER-2 Connecting rods, set of 8, race, Custom Maxi-Light Billet Steel, (special ordered) EAGLE H-BEAM ESP CONNECTING RODS This is a fabulous competition forged-steel connecting rod for the money. All rods are are X-rayed, sonic tested and magnafluxed to insure maximum reliability. We’ve used these rods in 700 HP applications. 237-CRS5155F3D Eagle H-Beam 302, set of 8, 5.155 long, .912 pin, 2.123 (Ford) big end 237-CRS5315C3D Eagle H-Beam 302, set of 8, 5.315 long, .927 pin, 2.100 big end 2-428-6490-2438-975 SCAT H-Beam 390-428 FE, set of 8, 6.490 long, standard dimensions CUSTOM JE & DIAMOND PISTONS We offer a full line of custom pistons for any engine application. These two manufactures provide the best of all worlds with fast delivery, absolute state of the art design, price, and endless applications. We also offer high quality off-the-shelf pistons such as Wiseco, Speed Pro, TRW and Keith Black, all with matching rings. Call for price and availability of custom special order pistons. JE-1 Custom piston, each, (special ordered) DIAMOND-1 Diamond custom piston, each, (special ordered) SEALED POWER/SPEED-PRO & TOTAL SEAL RINGS Ring seal is extremely important, because without proper ring seal the engine will not produce full cylinder pressures and not develop full power. Different applications require different rings to do the right job. We have found that Sealed Power/Speed-Pro and Total Sealed piston rings are the best choice for these engines, and that’s why they’re the rings we use in our race engines. We have a full ring selection for all your needs. RINGS-1 Piston ring set, race quality, (special ordered) RINGS-2 Piston ring set, street/strip, (special ordered) RINGS-3 Piston ring set, gapless top ring, (special ordered) CLEVITE AND ACL PERFORMANCE ENGINE BEARINGS The bearings in your engine take the most abuse of any component. We offer both Clevite 77 and ACL performance bearings for most all Ford Hi-Performance engines because of their proven reliability. It would take pages to list all the applications, so please call with your needs. sales: 203-284-3863 email: sales@cobraautomotive.com 35 www.cobraautomotive.com Rev051112 ENGINES - HEADS Competition Cylinder Heads The cylinder heads are the most important component in an engine for making power, no matter what the application. Cobra Automotive has extensive experience with race-prepping OE cylinder heads for rules requiring “stock” heads, and we also use these state-of-the-art heads, based on our vast experience building high performance Ford engines. From a high performance street engine to an all-out road racing engine, a well engineered set of heads can make ALL the difference. For a maximum-effort race engine, custom porting is also available. RHS PRO ACTION HEADS FOR 289-302-351W These small block Ford heads from Racing Head Service are the ones we use on our all-out vintage road race engines that make 560+ horsepower at 8200 RPM; a superb choice for racing classes requiring iron heads only. Excellent casting quality with smooth port-to-chamber transitions for less restricted air flow, modified water jacket dimensions for cooler operation, premium bronze valve guides, and a dual exhaust bolt pattern to accommodate stock manifolds or large tube headers. RHS-35304 Cylinder head, each, SB Ford, iron, bare, 2.020” int. & 1.60” exh. 180 cc runner, 58 cc chamber RHS-35305 Cylinder head, each, SB Ford, iron, bare, 2.020” int. & 1.60” exh. 200 cc runner, 58 cc chamber RHS-35306 Cylinder head, each, SB Ford, iron, bare, 2.080” int. & 1.60” exh. 215 cc runner, 58 cc chamber EDELBROCK “PERFORMER RPM” FORD 289-302-351W These lightweight aluminum non-emission heads are designed to operate in the 1500-6500 RPM high performance “street” range. These heads feature hardened valve seats, bronze valve guides, and threaded inserts in rocker stud and exhaust manifold holes, with hand blended valve pockets, 60 cc combustion chambers, and 5/8” thick deck surface (not for late model rail rockers). A 2.02” intake valve version is available; best suited for larger cubic inch engines and requires notched pistons for valve clearance. 60219 Cylinder Head, each, SB Ford, aluminum, bare, 1.90” int. & 1.60” exh. 170 cc runner, 60 cc chamber 60249 Cylinder Head, each, SB Ford, aluminum, bare, 2.02” int. & 1.60” exh. 170 cc runner, 60 cc chamber EDELBROCK “PERFORMER RPM” FORD FE 390 & 428CJ These lightweight aluminum heads save approximately 36 lbs of weight. The 76cc heads have a vertical exhaust manifold bolt pattern only; the 72 cc heads can be used with multi bolt pattern headers and most factory exhaust manifolds. These heads accept 390/427LR/428 style 2.09” intake and 1.66” exhaust valves. The 76 cc heads can be machined for MR/HR style 2.19” intakes and 1.73” exhaust valves. Features include hand-blended valve pockets, hardened valve seats for use with unleaded fuel, bronze valve guides, threaded inserts in rocker shaft holes and exhaust manifold holes. 60059 Cylinder Head, each, BB Ford, 390 & 428CJ, aluminum, bare, 2.09” int. & 1.66” exh. 170 cc runner, 72 cc chamber 60089 Cylinder Head, each, BB Ford, 427 LR & MR, aluminum, bare, 2.09” int. & 1.66” exh. 170 cc runner, 76 cc chamber 215-6009 Rocker shaft stud kit for above heads (provides better rocker shaft retention) sales: 203-284-3863 email: sales@cobraautomotive.com 36 www.cobraautomotive.com Rev051112 ENGINES - CAMS AND KITS Complete Cam Kits, Cams and Components It is often said that the cam is the “heart of the engine” because it determines the engine’s “personality”. The torque curve, ultimate horsepower figures, and rpm range of the effective power band are all determined by the cam. Cobra Automotive’s complete cam kits, camshafts, and components are all selected based on many years of experience, research, and hundreds of hours of Dyno testing. The components listed below have been selected from the premier manufacturers in valve train technology such as Comp Cams (the official camshaft of NASCAR), Crower, Lunati and Isky. Complete kits include cam, lifters, springs, retainers, locks, seals, and timing chains. Camshafts listed as “Race Only” are ground to our own specs, or can be custom-ground to suit your specific application. Please call or e-mail to discuss a custom camshaft or cam kit. Ford 289-302 C.I. 8 Cyl. 1963 - 1995 Complete Cam Only Lifters Springs Retainers Locks Seals Kit Intake .520 Lift - 230° Duration @ .050 Exhst .523 Lift - 236° Duration @ .050 110° Lobe Separation Very strong torque and response, 2500 + Stall Must Machine Must Machine Heads Heads K31-246-3 31-246-3 832-16 986-16 740-16 611-16 503-16 Mechanical Street K31-335-4 31-335-4 817-16 986-16 740-16 611-16 503-16 K31-760-8 31-760-8 838-16 914-16 741-16 611-16 503-16 CA6250-1Kit CA6250-1 817-16 930-16 732-16 613-16 CA6250-2Kit CA6250-2 66215-16 ISK9945 975-TI VL-700 Hydraulic Street Intake .560 Lift - 248° Duration @ .050 Exhst .560 Lift - 248° Duration @ .050 110° Lobe Separation 4 spd or Auto w/3500 Stall, intake, headers, 10 to 1 comp, low gears, very rough idle Mechanical Roller Street Must Machine Must Machine Heads Heads Intake .586 Lift - 246° Duration @ .050 Must Machine Must Machine Exhst .586 Lift - 246° Duration @ .050 110° Lobe Separation Heads Heads Broad power band, 2500 stall, headers, low gears, rough idle Mechanical Race Only* Intake .565 Lift - 248° Duration @ .050 Exhst .565 Lift - 248° Duration @ .050 106° Lobe Separation Intake, porting, headers, low gears, rough idle, manual trans, high compression Mechanical Roller Race Only* Intake .706 Lift - 255° Duration @ .050 Exhst .643 Lift - 253° Duration @ .050 106° Lobe Separation Intake, porting, headers, low gears, rough idle, manual trans, high compression Must Machine Heads Must Machine Heads 503-16 Must Machine Heads 503-16 Must Machine Heads Ford FE, 390, 427, 428 C.I. Complete Cam Only Lifters Springs Retainers Locks Seals 1963 - 1976 Kit Hydraulic Street K33-250-4 33-250-4 834-16 Intake .584 Lift - 240° Duration @ .050 Exhst .588 Lift - 246° Duration @ .050 110° Lobe Separation Headers, low gears, rough idle, 9.5 to 1 comp, 2800+ stall Mechanical Street 924-16 741-16 612-16 Must Machine Heads K33-245-4 33-245-4 835-16 972-16 747-16 612-16 Intake .571 Lift - 236° Duration @ .050 Exhst .571 Lift - 236° Duration @ .050 110° Lobe Separation Headers, low gears, rough idle, 9.0 to 1 comp, mild converter Mechanical Roller Street K33-781-9 33-781-9 839-16 Intake .645 Lift - 248° Duration @ .050 Exhst .645 Lift - 248° Duration @ .050 110° Lobe Separation Headers, low gears, rough idle, 9.5 to 1 comp, converter 929-16 741-16 612-16 Must Machine Heads Timing Chains 2120 Pre 72 use 3220 2120 Pre 72 use 3220 2120 Pre 72 use 3220 78520T-9G 78520T-9G Timing Chains 505-16 2108 505-16 2108 505-16 2108 Must Machine Heads Must Machine Heads Must Machine Heads Mechanical Race Only* CA6250-3Kit CA6250-3 837-16 950-16 730-16 612-16 505-16 78508T-9 Mechanical Roller Race Only* CA6250-4Kit CA6250-4 66216-16 947-16 739-16 612-16 505-16 78508T-9 Intake .652 Lift - 251° Duration @ .050 Exhst .652 Lift - 251° Duration @ .050 108° Lobe Separation Intake, porting, headers, low gears, rough idle, manual trans, high compression Intake .730 Lift - 259° Duration @ .050 Exhst .730 Lift - 259° Duration @ .050 108° Lobe Separation Intake, porting, headers, low gears, rough idle, manual trans, high compression * Race Only can be custom ground to suit your application - Call for information and availability sales: 203-284-3863 email: sales@cobraautomotive.com 37 www.cobraautomotive.com Rev051112 ENGINES - VALVE TRAIN SMALL BLOCK ROLLER ROCKERS The valve train is one of the most critical parts of a high performance engine and the rocker arms are a key component on that list. We offer many different styles of roller rockers for your small block Ford from brands such as Competition Cams, Crane, Crower, Jesel, and Scorpion Performance. Our selection covers stock replacement roller rockers for street applications, heavy duty endurance roller rockers for more severe use and the ultimate choice is shaft mounted rockers for all out 8000 plus rpm competition use. Most rockers available for use with 3/8” or 7/16” studs and come with adjusting nuts. Individual rocker arms and service parts can also be ordered. Please call to speak with one of our technician’s for guidance in selecting the best rockers for your application. The part numbers listed here are for complete sets of 16 rocker arms. 1431-16 Comp Cams, Magnum, rail type Ford 65-68 289 Hi-Po (3/8 stud 1.6 ratio) 1442-16 Comp Cams, Magnum, Ford 289-351W (3/8 stud 1.6 ratio) 1631-16 Comp Cams, Ultra Pro Magnum, Ford 289-351W (3/8 stud 1.6 ratio) 1632-16 Comp Cams, Ultra Pro Magnum, Ford 289-351W (7/16 stud 1.6 ratio) CRN86757-16 Crane, Gold Race, Ford 289-351W (7/16 stud 1.6 ratio) CRN36757-16 Crane, Gold Race, Ford 289-351W (7/16 stud 1.7 ratio) CRW73612-16 Crower, Enduro SS, Ford 289-351W (7/16 stud 1.6 ratio) CRW73614-16 Crower, Enduro SS, Ford 289-351W (7/16 stud 1.7 ratio) KSS-536060 Jesel, shaft mount, Sportsman, SB Ford, WP Windsor JR/SR (1.6 ratio) KSS-537070 Jesel, shaft mount, Sportsman, SB Ford, WP Windsor JR/SR (1.7 ratio) KPS-310116-S Jesel, shaft mount, Pro Series, Standard Slot, SB Ford, RHS/AFR Windsor (specify ratios) KPS-310116-M Jesel, shaft mount, Pro Series, Mohawk cut, SB Ford, RHS/AFR Windsor (specify ratios) SCP1018 Scorpion Performance, Ford 289-351W (7/16 stud 1.6 ratio) Comp Cams Ultra Pro Magnum Jesel Sportsman Series Jesel Pro Series Standard Slot Jesel Pro Series Mohawk Cut VINTAGE LEGAL ROCKER ARMS Cobra Automotive has a unique offering for the vintage racer competing under strict FIA rules requiring the use of OE type rocker arms. We begin by hand selecting sets of stock style, cast steel rockers. Next, we grind oil slots in the push rod cups, and then the rockers and balls are “lapped” for smooth operation. If required: the rockers and balls are machined for 7/16 studs. Finally they are cryogenically treated for strength and durability. Sold in sets of 18 so you automatically have 2 for spares. CA-36800-18-3/8 Rocker arms, set of 18, Ford 289-351W (3/8 stud 1.6 ratio) CA-36800-18-7/16 Rocker arms, set of 18, Ford 289-351W (7/16 stud 1.6 ratio) VINTAGE LEGAL COMPETITION ROCKER ARM BALLS Here is a truly unique offering from Cobra Automotive. These OE style rocker balls are made from 8620 alloy steel, machined with oil grooves, heat treated to Rockwell 68 hardness and finally, a special friction reducing treatment is applied. All in an effort to extract the most reliability out of stock style valve train components used with modern cams and valve spring pressures. CA-8620-rocker ball Rocker balls, set of 16, 7/16 stud BIG BLOCK FE ROLLER ROCKER ARM ASSEMBLIES These complete Harland Sharp assemblies represent the ultimate in valve train components for high performance use in your big block FE Ford. CNC machined aluminum rockers with precision roller tips, oilite bronze bushings and heavy duty adjusters compliment the billet steel rocker stands and spacers on this super duty assembly. For engines with spring pressures exceeding 350 lbs open, we recommend the kit with end supports which provide extra stability with a cradle design that surrounds the end rocker reducing shaft flex at the tip. For maximum effort FE engines utilizing high lift cams & high valve spring pressures to turn higher RPMs, we offer a set with needle bearing rockers on heavy duty .875” shafts that is supplied standard with end supports. Available for 390-428 and 427 Medium Riser engines. All components available separately. S4006B Rocker arms, set of 16 w/ bronze bushings, Ford FE, (1.76 ratio, fits .841 shafts) S4006BK Rocker arm & shaft set w/ bronze bushings, Ford FE (.841 shaft 1.76 ratio) S4006BKE Rocker arm & shaft set w/ bronze bushings & end supports, Ford FE (.841 shaft 1.76 ratio) S4006NBK Rocker arm & shaft set w/ needle bearings, end supports & heavy duty shafts, Ford FE (.875 shaft 1.76 ratio) sales: 203-284-3863 email: sales@cobraautomotive.com 38 End supports shown on assembly to rear www.cobraautomotive.com Rev051112 ENGINES - VALVE TRAIN VALVES Cobra Automotive uses Ferrea valves in our own racing engines because of their reputation as the industry’s most reliable extreme-duty valve. Results from extensive internal R&D are utilized to ensure the absolute best valves on the market. The comprehensive selection includes the 5000 Series, 6000 Series, Competition Plus Series, Hollow Stem Competition Plus Series and Titanium Valves. Our extensive experience building state-of-the-art vintage racing engines enables us to recommend the best valves for your engine based on the application and performance requirements. Speak to our engine staff for custom valves for your application. F1653 Valve, intake, ea. Titanium 2.080 x 11/32 x 5.240 L with hard tip F1149PQ Valve, exhaust, ea. Comp. Plus 1.600 x 11/32 x 5.30 L F5015 Valve, exhaust, ea. SS, 1.600 x 11/32 x 5.030 L for 289-302-351 W F5018 Valve, intake, ea. SS, 1.940 x 11/32 x 5.030 L for 289-302-351 W F6215 Valve, intake, ea. SS, 2.190 x 3/8 x 5.450 L for 390-427-428 FE F6216 Valve, exhaust, ea. SS, 1.750 x 3/8 x 5.435 L for 390-427-428 FE VALVE SPRINGS Selecting the correct valve springs for your application is critical to both performance and reliability. Preventing spring bind and valve “float” requires careful matching of all components. Beehive springs reduce spring and retainer weight, Nitride treatment increases surface strength and heat treating helps resist load loss. We offer springs manufactured by Comp Cams, Ferrea, Isky and PSI, the most trusted names in the industry. Spring pressures listed below are rated at both “seat” height (S) and “open” height (O). Here are just a few of our listings, please confer with our engine staff for further information. 924-16 Comp Cams, set 16, BB Ford, dual w/ damper, 112 lbs (S) 355 lbs (O) 929-16 Comp Cams, set 16, BB Ford, dual w/ damper, 148 lbs (S) 432 lbs (O) 930-16 Comp Cams, set 16, SB Ford, dual w/ damper, 153 lbs (S) 383 lbs (O) 950-16 Comp Cams, set 16, BB Ford, dual w/ damper, 133 lbs (S) 332 lbs (O) 972-16 Comp Cams, set 16, BB Ford, single w/ damper, 124 lbs (S) 293 lbs (O) ISK-9915 Isky, set 16, SB Ford, dual w/ damper, 195 lbs (S) 540 lbs (O) CT1573DML-16 PSI, set 16, SB Ford, dual nitridted w/ damper, 220 lbs (S) 730 lbs (O) S2002 Ferrea, set 16, SB Ford, beehive, PAC alloy nitrided, 130 lbs (S) 337 lbs (O) VALVE SPRING RETAINERS, LOCKS AND SEALS Valve springs require retainers of the correct design, dimensions and materials to work properly, whether it be 4140 chrome moly steel, light weight tool steel, or Titanium. For double or triple springs and 7 or 10 degree locks, we can supply the correct retainers for you. Correctly matching the locks to the valve stems is essential for the locks to function. The tang on the locks only temporarily holds the valve stem until the lock seats in it’s taper, retaining the valve by it’s “collet” effect. The final detail is the valve seals. Seals are available in stock umbrella style or positive-stop style, in either Teflon or Viton materials. Our engine staff will be glad to assist you in selecting these components. 740-16 Comp Cams Retainers, set 16, Steel, double valve spring, 10 degree 743-16 Comp Cams Retainers, set 16, Steel, double valve spring, 7 degree 730-16 Comp Cams Retainers, set, Titanium, double valve spring, 10 degree ISK-92TI Isky Retainers, set 16, Titanium, double valve spring, 7 degree CV-XRE573-S-16 Xceldyne Retainers, set 16, Light weight steel for PSI springs, 8 degree 611-16 Comp Cams Locks, set 32, Steel, 11/32”, 10 degree (lash cap app.) 612-16 Comp Cams Locks, set 32, Steel, 3/8”, 10 degree (lash cap app.) VL-700 Isky Locks, set 32, Super 7, Steel, 11/32”, 7 degree XL0690 Xceldyne Lock (per valve) Titanium, 11/32”, 8 degree XL0693-C Xceldyne Lock (per valve) Titanium, 5/16”, 8 degree, Radius Groove 502-16 Comp Cams Seals, Valve, set 16, Umbrella, 11/32” (stock 289 Hi-Po) 503-16 Comp Cams Seals, Valve, set 16, Teflon, 11/32” .530” Guide 505-16 Comp Cams Seals, Valve, set 16, Teflon, 3/8” .530” Guide PUSHRODS The correct-length pushrod, made of the right material, is an important part of proper valve train control. We carry a full line of pushrods, made by manufacturers that have been individually selected by our engine staff. Whether it is a stock replacement or a one-piece, swagged and tempered steel racing pushrod, we can supply the correct components for any application. We are dealers for Competition Cams, Crower, Ferrea, Isky, Manton & Xceldyne, and many others, depending on your specific need. 7709-1 Comp Cams Adjustable, 6.800-7.800, checker w/ 5/16” cup end, Hi-Tech 7929-16 Comp Cams, set 16, 260-302 Std. Length, 1962-69, 5/16” x 6.800” Hi-Tech 7930-16 Comp Cams, set 16, 260-302 +.050” Long, 1962-69, 5/16” x 6.850” Hi-Tech 7933-16 Comp Cams, set 16, 260-302 +.100” Long, 1962-69, 5/16” x 6.900” Hi-Tech 7533-16 Comp Cams, set 16, FE big block, 65-76 w/ Adj. Rockers, 11/32” x 9.157” Manton Manton Pushrod, single, custom made, race-quality (made to order). sales: 203-284-3863 email: sales@cobraautomotive.com 39 www.cobraautomotive.com Rev051112 PRODUCTION NUMBERS SHELBY PRODUCTION FORD GT PRODUCTION 1965 Shelby Prototype; Coupe Street Prototype 1 Prototype; Roadster (includes X-1 Can-Am car) Street Cars 520 Lightweight Chassis (includes 2 427 cars) 1966 Prototype 1 Production Race Coupe Drag Cars 4 Production Road Coupe Competition Prototype 2 MK I Competition Production Cars 34 Lightweight Mirage 1965 Shelby Total 562 MK III Post Production Chassis 1966 Shelby Alan Mann Lightweight MK I Street Cars 1,368 Alan Mann Lightweight MK II Paxton Prototype 1 J Car Chassis (includes 2 Can-Am) Hertz Prototype 2 TOTAL FORD GT CHASSIS Hertz Cars 999 Drag Cars 4 TOTAL MK II HOLMAN Convertibles 4 1966 Shelby Total 2,378 TOTAL KAR-KRAFT MK IV REPRODUCTIONS 1966 1966 1967 1967 1967 1967 1968 Shelby-Built Notchback Notchback Prototype Notchback Production Racer Shelby-Built Notchback Total TOTAL SAFIR/JWA MK V 1 20 21 1968 Shelby-Built Notchback Total 5 1968 Lone Star 1 7 COBRA PRODUCTION Shelby-Built Notchback Small Block 289 Engine Notchback Prototype 1 289 Engine Street Car Notchback Production Racer 25 Shelby-Built Notchback Total 26 Factory Team: 1968 16 41 Leaf Spring Small Block 260 Engine Shelby 260 Engine Street Car GT350 1,175 260 Factory Team Car GT500 2,048 260 Factory-Prepared Competition Car GT 500 Notchback Prototype 1 260 Independently-Prepared Race Car GT 500 Convertible Prototype 1 260 Dragonsnake Shelby Total 3,225 TOTAL LEAF SPRING 260 COBRA Shelby GT500 Notchback Prototype GT350 Fastback GT350 Fastback Hertz GT350 Convertible GT 500 Fastback GT500 Fastback Hertz GT500 Convertible GT500 KR Fastback GT500 KR Convertible GT500 KR Convertible Hertz Shelby Total 7 5 4 48 33 11 3 7 7 2 3 12 142 453 289 Standard Competition 289 Sebring Car 289 Lemans Car 289 / 427 Prototype “Flip-Top” 289 FIA Roadster 289 Daytona Coupe 289 USRRC Roadster 1 803 224 404 1,044 2 402 1,053 517 1 4,451 62 4 1 7 1 75 2 3 5 1 5 6 6 Factory – Prepared competition Car Independently-Prepared Competition Car Dragonsnake Bare Chassis (Mercer Cobra) Willment Coupe COB/COX Street Car COB/COX Race Car TOTAL LEAF SPRING 289 COBRA 11 21 4 1 1 1 59 579 TOTAL LEAF SPRING COBRA 1969-70 Shelby* Barrier Test car & Prototype 3 Coil Spring Cobra - Big Block Engine GT350 Fastback 935 Street Car GT350 Fastback Hertz 152 Prototype Competition Roadster GT350 Convertible 194 Production Competition Roadster GT500 Fastback 1,534 Semi-Competition Roadster GT500 Convertible 335 Daytona Super Coupe 1969-70 Shelby Total 3,153 Chassis Only *2361 Titled as 1969 Models, 789 as 1970 COB/COX Cars TOTAL COIL SPRING COBRA 1969 Boss 302 Fastback Racers 5 654 sales: 203-284-3863 email: sales@cobraautomotive.com 40 260 2 23 27 1 3 27 343 www.cobraautomotive.com Rev051112 PRODUCTION NUMBERS & ENGINE SPECIFICATIONS HIGH PERFORMANCE MUSTANGS 1964 -1973 HIGH PERFORMANCE MUSTANGS 1964 -1973 GT 1965 GT 1966 GT 1967 GT 1968 GT 1969 GT TOTAL GT 15,079 25,517 24,079 17,458 4,973 87,106 MACH 1 1969 MACH 1 1970 MACH 1 1971 MACH 1 1972 MACH 1 1973 MACH 1 TOTAL MACH 1 72,458 40,970 36,499 27,675 35,440 213,042 SELECTED PERFORMANCE ENGINE SPECS 289 HIGH PERFORMANCE BOSS 1969 BOSS 302 1,628 1969 BOSS 429 857 1970 BOSS 302 7,013 1970 BOSS 429 499 1971 BOSS 351 1,806 TOTAL BOSS 11,803 428 COBRA JET 1968 COBRA JET 1,299 1969 COBRA JET 13,261 1970 COBRA JET 3,489 TOTAL 428 COBRA JET 18,049 SELECTED PERFORMANCE ENGINE SPECS 428 CJ RAM AIR 4V 271 HP 335 HP VIN letter code K BHP @ RPM 271 @ 6000 Torque @ RPM 312 @ 3400 Bore. Inch 4.00 Stroke. Inch 2.87 Cubic Displacement 289 Compression Ratio 10.5 to 1 Fuel Required Premium Carburetor Autolite 4V CFM Rating 480 Intake port inches 1.05x1.94 Exhaust port inches 96x1.24 Camshaft Type Mechanical Valve lift; Intake/Exhaust .460/.460 Duration; Intake/Exhaust –degrees 310/310 Normal Oil Pressure 35-55 psi @ 2000 Used on 1965-67 Mustang GT VIN letter code R, Q for non-ram air BHP @ RPM 335 @ 5200 Torque @ RPM 440 @ 3400 Bore. Inch 4.13 Stroke. Inch 3.98 Cubic Displacement 428 Compression Ratio 10.6 to 1 Fuel Required Premium Carburetor Holley 4V CFM Rating 735 Intake port inches 1.34x2.34 Exhaust port inches 1.28x1.84 Camshaft Type Hydraulic Valve lift; Intake/Exhaust .481/.490 Duration; Intake/Exhaust –degrees 270/290 Normal Oil Pressure 35-60 psi @ 2000 Used on 1968 GT, 1969-70 Mach I, 1968 Shelby GT500 KR & 1969-70 GT500 SELECTED PERFORMANCE ENGINE SPECS SELECTED PERFORMANCE ENGINE SPECS BOSS 302 4V 290 HP 427 Medium Riser 4V VIN letter code G BHP @ RPM 290 @ 5800 Torque @ RPM 290 @ 4300 Bore. Inch 4.03 Stroke. Inch 3.00 Cubic Displacement 302 Compression Ratio 10.5 to 1 Fuel Required Premium Carburetor Holley 4V CFM Rating 780 Intake port inches 1.75x2.50 Exhaust port inches 1.74x2.00 Camshaft Type Mechanical Valve lift; Intake/Exhaust .477/.477 Duration; Intake/Exhaust –degrees 290/290 Normal Oil Pressure 35-60 psi @ 2000 Used on 1969-70 Boss 302 Mustang sales: 203-284-3863 VIN letter code BHP @ RPM Torque @ RPM Bore. Inch Stroke. Inch Cubic Displacement Compression Ratio Fuel Required Carburetor CFM Rating Intake port inches Exhaust port inches Camshaft Type Valve lift; Intake/Exhaust Duration; Intake/Exhaust –degrees Normal Oil Pressure Used on email: sales@cobraautomotive.com 41 425 HP N/A 425 @ 6000 480 @ 3700 4.23 3.78 427 11.6 to 1 Premium Holley 2 x 4V 1304 1.34x2.34 1.28x1.84 Mechanical .500 /.500 306/306 35-65 psi @ 2000 1967 Shelby GT500 www.cobraautomotive.com Rev051112 ENGINES - CARBURETION AND FUEL SYSTEMS The importance of installing the right manifold for your application cannot be overstressed. Install the wrong one, and you’ll sacrifice precious horsepower. , Without a good manifold, you can never achieve proper cylinder balancing, no matter how much attention is focused on the rest of the engine. We offer what our R&D has proven to be the best manifold choices for achieving maximum horsepower from our engines. The selections below reflect many years of dyno testing, as well as success on the street and racetrack. We also offer custom intake manifold porting that can range from a mild to maximum effort. Please consult our engine department to discuss options available for your specific application. COBRA DUAL PLANE MANIFOLD This is a high-quality reissue of the original Cobra intake that came as original equipment on the early Shelbys, made by Blue Thunder Products. A superior casting to the originals in every way, this manifold boasts a much-improved port design for a significant power gain over the original piece. The perfect combination of increased performance with visual originality make this intake manifold a great choice. No more hassles with old castings that have outlived their useful days. 273-302C4V 289-302 small block EDELBROCK PERFORMER RPM MANIFOLD This dual-plane manifold is available for both big and small block engines. It is capable of excellent high rpm power while still delivering good throttle response. Because it is legal for most all vintage-racing venues, we’ve done extensive development on this particular manifold. It is absolutely one of the best manifolds for all around use, and when modified, it’s a great all-out race piece as well. 293-7121 289-302 small block 293-7181 351 W small block 293-7105 390-427-428 FE big block w/low or medium rise heads EDELBROCK VICTOR JUNIOR A high rpm single-plane manifold, designed for the racer who is looking for horsepower on the high end. This manifold typically produces 15-30 more horsepower on a wellprepared race engine without sacrificing much of its valuable midrange power. For use where rules allow the use of a single-plane intake manifold. Will increase air cleaner height approximately 1/2”. 293-2921 289-302 small block 293-2980 351W small block, SVO block w/ 9.2” deck 293-2981 351W small block, standard 351W block w/ 9.5” deck EDELBROCK SUPER VICTOR MANIFOLD This single-plane manifold is capable of even higher rpm than the Victor Junior. Designed for all-out racing, it’s well-suited for competition 289-302 engines with an 8.2” deck height and aftermarket Windsor-style racing cylinder heads. This is an excellent manifold for large-displacement drag racing engines, delivering huge power gains from 4500 to 8500 rpm. Carburetor pad is 3/4” taller than the Victor junior manifold. 293-2928 289-302 small block w/ 8.2” deck FORD FE-SERIES BIG BLOCK MEDIUM RISER MANIFOLD Another beautiful intake recreated by Blue Thunder Products. This is an exact copy of the original Ford Medium Riser 427-428 Interceptor dual-plane manifold. Like all Blue Thunder reproductions, this manifold offers greatly improved flow characteristics over the original; while it resembles the original 60’s Ford item, it will outperform it’s older counterpart by a wide margin. This is a direct bolt-on replacement for your 428 Cobra Jet, 427 Medium Riser, or 390 cu. in. engine. Offered with two different port configurations for 390-428 engines and the 427 Medium Riser engine. Delivers excellent performance throughout the entire RPM range, all the way to the very top-end. 303-428CJ4V ALL 390-428 FE big blocks w/low or Cobra Jet heads 303-427MR4V 427 Medium Riser sales: 203-284-3863 email: sales@cobraautomotive.com 42 www.cobraautomotive.com Rev051112 ENGINES - CARBURETION AND FUEL SYSTEMS DUAL QUAD MANIFOLDS Nothing looks as good as multiple carburetion on a Ford V8. We offer perfect reproductions of the original Ford 427 Medium Riser and 289 dual quad intake manifolds. These are our specialty. This 390-428 intake at the left is the same one that would have come on any 427 Medium Riser-powered vehicle, as well as 1967 Shelby GT500’s. The 289 2X4V intake manifold pictured at the bottom of this page is exactly as sold by Ford through its original High Performance Parts catalog. Both have Holley carburetor bolt patterns and improved port designs to deliver significant power increases over original stock units. These are direct replacements without worrying about old castings that have cracked, been overworked, or repaired. Also available as a complete unit with carburetors, linkage, fuel log and air cleaner. 303-IM427-8V Intake Manifold, 2x4 BBL, 427 Medium riser 303-L427M 427 Medium Riser 2x4 bbl linkage 303-FL427M 427 Medium Riser 2x4 bbl fuel log 303-IM289-8V 289-302 dual quad intake manifold only 390/427/428 FE 2x4 manifold BLUEPRINTED AND REPRODUCTION CARBURETORS Custom Holley racing carburetor Blueprinted carburetors work great on the street as well as on the track, providing improved throttle response along with added power. We also offer blueprinted multiple carburetion for our dual quad setups with matched pairs of Holley carbs for your big or small block engine. Please specify the application so the correct CFM and level of modification can be selected. BLP-650 BLP 650HP Weekend Warrior, Pro-Street/Strip & Open Track carburetor BLP-650PF BLP 650HP Pro Flow, Road Race carburetor BLP-650NASCAR BLP 650HP NASCAR Version, Road Race carburetor 273-HC1 Holley 715 CFM, New Repro, center pivot float, Manual choke, 65 Shelby GT-350 “S2MS Style” 273-600-BJBK Pair, Holley Dual Quad, 600 CFM repro BJ/BK vac. secondary 273-450M Pair, Holley Dual Quad, 450 CFM chokeless mech. secondary 273-465V Pair, Holley Dual Quad, 465 CFM auto choke vac. secondary Holley 715 cfm reproduction COMPLETE DUAL QUAD CARBURETION SYSTEMS Our dual quad intake manifolds are also available as 100% complete kits with carburetors, fuel logs, linkage, and air cleaners (Note: all complete kits are shipped un-assembled). Shown here is our small block Ford unit, fully equipped, less air cleaner. A variety of air cleaner assemblies are available to suit your taste. Please consult one of our engine specialists for assistance. 100-2x4-427MR Complete 2x4 BBL system, 390/427/428 incl. manifold, (2) 600 CFM repro BJ/BK carbs, linkage, fuel log, and studs 100-2x4-SB390M Complete 2x4 BBL system, 289-302 incl manifold, (2) 390 CFM Holleys carbs, linkage, fuel log, and studs Note: Complete dual quad kits do not include air cleaners Ready-to-run 289-302 2x4V system sales: 203-284-3863 email: sales@cobraautomotive.com 43 www.cobraautomotive.com Rev051112 ENGINES - CARBURETION AND AND FUEL SYSTEMS 289/302/351W WEBER CARBURETION SYSTEM Since the mid 60’s, Weber 48IDA’s have been the ultimate carburetion system, and they’re still at home on small block Ford engines in GT350’s and Cobras. It would take an entire book to describe how they work and why they are still the best all-around carburetion system available for the street or road racing. The secret is perfect fuel distribution. Four twin-throat carburetors dedicate one barrel to each cylinder on an independent runner (IR) manifold. The bottom line is that nothing can match them for throttle response and torque throughout the entire rpm range, and they are STILL virtually unmatched for all-around performance. Each Weber carburetion system is custom-built to order, based on your engine’s specifications. Please call to discuss engine details. 289 COBRA FIA WATERNECK The FIA waterneck on the competition Cobras was a completely unique piece, and is fabricated entirely from steel tubing, with a fuel log mounted on top for the four Weber carburetors. The one seen here has been outfitted with -AN fittings for braided s.s. fuel lines, but they are also available with original-style nipple fittings for the neoprene fuel lines. These waternecks gave the fuel hoses the nickname “octopus fuel lines”. 100-FuelLog-WaterNeck Fuel Log / Water Neck, 289 Cobra, Weber application w/ AN fittings 100-FuelLog-WaterNeck-N Fuel Log / Water Neck, 289 Cobra, Weber application w/Nipples HOLLEY LOW PRESSURE REGULATOR FOR WEBER CARBS Unlike four barrel carburetors, Weber carburetors are designed to flow a lot of fuel at a much lower pressure. The maximum recommended fuel pressure is 3.5 psi, and this regulator is the correct one. It looks identical to Holley’s standard 4-9 psi regulator, but it is for applications requiring 0-4 psi. This regulator is the right choice for use with all Weber carburetion systems. HOL-12-804 Fuel pressure regulator, 1-4 PSI, 3/8 NPT FUEL PUMPS More reliable than electric fuel pumps, these pumps are highly preferred over the electric pumps for our performance and competition cars. Manufactured by CARTER, one of Fords OE suppliers, these street pumps are rated at 120 gallons per hour with 6 psi of fuel pressure. The competition pumps deliver 172 gallons per hour at a constant 8 psi of fuel pressure. No regulator is required with single or dual four barrels. 232-M7904G 289-351W race application 232-M60454 289-351W street application 232-M6905 390-428 big block street application CV2522 289-351W billet competition only fuel pump FOUR BARREL RETURN SPRING KIT If you’re running a typical Holley 4150/4160 series four-barrel carburetor, this bracket kit will cure your throttle linkage return problems. It comes with dual return springs and it’s built rugged enough for competition. Chrome bracket is suitable for any show car. Includes one set of heavy springs and one set of light springs. MOR64927 Return spring and bracket kit HOLLEY 715 CARBURETOR REBUILD KIT The 1965-67 Shelby GT350’s came with a very special 715 CFM Holley carburetor. Here is a complete rebuild kit for the 715 CFM Holley. These carburetors are quite unique, with special NASCAR-style float bowls that were only used on the 1965-67 GT350 Shelby Mustangs. The kits include special needles & seats for these carburetors, and all the components you’ll need to completely rebuild your carburetor, including a new secondary vacuum diaphragm. These kits are no longer available from Holley, so we had them specially reproduced. Obviously, they will not last forever, so order one for your carburetor now, either for a rebuild or to have as a spare, while the components are still available. 333-442 (each) sales: 203-284-3863 email: sales@cobraautomotive.com 44 www.cobraautomotive.com Rev051112 ENGINES - CARBURETION AND FUEL SYSTEMS EARL’S FUEL LINE KITS FOR DUAL FEED HOLLEYS Earl’s fuel kits are offered in MIL SPEC TYPE III hard anodizing, “Ano-Tuff” (AT) for superior wear and corrosion resistance. Bowl fittings are contoured for improved flow. The dual inlet line has a -8 threaded opening on both ends for applications where a pressure gauge is desired in the line. EARAT101295 Fuel Log, -8, Pro-Lite line, single inlet for Holley 4150 Carb. EARAT101296 Fuel Log, -8, Pro-Lite line, dual inlet for Holley 4150 Carb. Single inlet Dual Inlet 427/428 FACTORY REPRO 2X4 FUEL LOG This is an exact replica of the factory fuel log that was supplied on the original dual quad FE engines from Ford, original factory linkage supplied on the dual quad 289 and 427/428 Ford FE engines. Beautifully replicated with factory-correct plating. 303-FL427M Reproduction 2x4 bbl linkage kit, 390/427/428 427/428 Dual Quad Fuel Log 427/428 2X4 BARREL LINKAGE KIT Our dual quad linkage kit is an exact copy of the original factory linkage supplied on the dual quad 289 and 427/428 Ford FE engines. Beautifully replicated with factory-correct plating. 303-L427M Reproduction 2x4 bbl linkage kit, 390/427/428 303-L289 Reproduction 2x4 bbl linkage kit 289/302 OE style (not pictured) 427/428 Dual Quad Linkage Kit COMPETITION K&N AIR CLEANERS 14” 289 Hi-Po/428 CJ Proper air filtration is critical, and so is the breathing requirement of a high-output engine. Minimal hood clearance with the use of free-breathing intake manifolds will often create air cleaner interference issues. In many cases, there is very little room. K&N Engineering offers solutions, with air cleaners that have become the standard of the industry. Special 1” drop-base air cleaners allow the use of a full 3” tall air cleaner element and a very important 1” spacer plate under the carburetor. For additional breathing, K&N’s Extreme Air Cleaner Cover is the way to go. This cover allows additional air to be forced into the engine without critical carburetor signal disturbance. K&N air cleaner elements are reusable, and when washed and maintained correctly, they will last forever. 217-601280 Air cleaner assembly, K&N, drop-base, 14” x 3” 217-601170 Air cleaner assembly, K&N, standard base, 11” x 2-1/8” ELEMENTS ONLY: “X-Streme” air cleaner top 217-661401 217-661101 217-E1560 217-E1650 217-E3740 217-E2600 AF7 Air Filter Top, K&N X-Stream Airflow, 14” Hi-Flow Air Filter Top, K&N X-Stream, 11” Hi-Flow Air filter element, K&N, 13.25” X 2.1875” Air filter element, K&N, 14” X 3” Air filter element, K&N, 14” x 2-5/16” for CJ and 289 Hi-Po Air filter element for Stelling & Hellings Cobra air cleaner (Special Order) Air filter element, oval, 2-1/4” tall, washable and reusable 2-1/4” tall oval air cleaner element sales: 203-284-3863 email: sales@cobraautomotive.com 45 www.cobraautomotive.com Rev051112 ENGINES - IGNITION DISTRIBUTORS AND IGNITION PARTS MSD electronic distributors have consistently given us the kind of reliability we look for on or off the racetrack because they deliver consistent ignition performance at extremely high RPM’s. Fully rollerized needle-bearing main shaft, and a completely adjustable advance curve make this the perfect choice for reliability. 233-8582 289-302 small block MSD billet distributor 233-8579 289-302 small block MSD billet distributor, small diameter version 233-8594 390-428 FE big block MSD billet distributor CA-30-2809 Our 289-302 FIA race-modified Ford dual point distributor CA-30-2899 Our (street) 289-302 distributor, modified to trigger MSD box CA-30-2897 Our (street) 390-427-428 distributor, modified to trigger MSD box SERVICE PARTS Cobra Automotive Heavy Duty Replacement Points, condensers, rotor & cap for Ford distributors specially selected by Cobra Automotive for this application. ACC110223 Points, Dual Point, Ford V8, 2 required. We tested several makes on our Sun distributor tester and found these able to resist point bounce to 7,000 rpm plus. We use these exclusively in our modified FIA race distributors and cars. ACC100211 Condenser for Ford dual point distributor ACC8222 Distributor Cap & Rotor, Ford V8 (black cap) 233-8408 MSD distributor cap for 289-302, red 233-8431 MSD distributor cap for small diameter Ford 289-302, Red 233-84313 MSD distributor cap for small diameter Ford 289-302, Black 233-8433 MSD distributor cap for 390-428 distributor, red 233-8423 MSD Rotor for billet 289-302 distributor 233-8467 MSD Rotor for 289-302 small diameter distributor 233-8583 MSD 282-302 Bronze gear for roller cam use, .466” ID 233-8581 MSD 390-428 Bronze gear for roller cam use, .530” ID 35200 MSD Composite Carbon Ultra Poly gear, 289-351W, .467” shaft 233-HDW11075 Roll Pin, Heavy Duty for distributor gear C3AZ12270A Distributor Hold Down, Small Block Ford 233-8464 Advance Kit, MSD, for all billet & Pro-Billet distributor 233-84661 Magnetic Pickup, MSD, for all billet & Pro-Billet distributor 233-8860 MSD replacement distributor lead, 2 wire mag trigger, 6’ long IGNITION COIL The MSD Blaster Coil is the recommended coil for most racing application ignitions. Max output is 45,000 volts. This unit has a special construction to insure against failure from excessive vibration. A must for high energy ignition systems. 233-8202 MSD Blaster 2 coil 233-8222 Coil, MSD Blaster, High Vibration, Black. Requires ballast resistor sold separately to work w/points 233-8214 Ballast, MSD for points application, 0.8 ohm 233-8200 Coil, MSD Blaster 2, Chrome with ballast for points M-12044-A2 Coil Bracket, Chrome, 1965-73 IGNITION BOX This box is the standard of the industry. The new 233-6425 has 2 rotary dials to set the limit in 100 RPM increments and incorporates a sealed connector for all the wiring. Additional rev modules for the 233-6420 are still available separately. Comes with a built-in rev limiter and plug-in module to change the RPM limits in seconds. Rev-limiting modules in 100 RPM increments with 3000, 6000, 7000, and 8000 rpm modules supplied in the box. Some tachometers need MSD tach adapter for ignition box compatibility. 233-6420 Ignition Box, MSD 6AL with plug in rev limiter modules 233-6425 Ignition Box, MSD Next Generation Digital 6AL Ignition Control w/Soft Touch Rev. Control, includes wire harness 233-6430 Ignition Box, MSD 6ALN (NASCAR) with 6 Pin Connector & plug in rev limiter modules 233-8920 Tach Adapter, MSD, for magnetic trigger 233-8830 Noise Filter, MSD, w/cover. Reduces interference w/in-car camera systems sales: 203-284-3863 email: sales@cobraautomotive.com 46 www.cobraautomotive.com Rev051112 ENGINES - IGNITION / ALTERNATOR / STARTER SPARK PLUG WIRE SETS MSD 8.5 mm super-conductor wire sets are the finest in the industry and we recommend them for race or street. They offer an extremely low resistance of less than 50 ohm’s per foot, for more spark energy to your plugs. Copper alloy conductors wrapped in a series of silicone and synthetic materials make this wire an excellent choice for street-friendly suppression or competition use. Multi-angle MSD wires sets are bend-to-fit. MOROSO sets for Street/performance. Our own wire kit uses MOROSO Ultra-40 wire and is for any all-out racing application. CA-WIRE KIT Wire Kit, competition for V8, 135 degree, 8.65 mm w/blue insulated sleeve material, wire # markers & self vulcanizing tape 233-31199 Wire Set, MSD, Multi-Angle, 8.5 mm, Red, for Early or HEI dist cap 233-31193 Wire Set, MSD, Multi-Angle, 8.5 mm, Black, for Early or HEI dist cap 233-31239 Wire Set, MSD, 90 deg, 8.5 mm, Red, for Early or HEI dist cap 233-31233 Wire Set, MSD, 90 deg, 8.5 mm, Black, for Early or HEI dist cap 249-73232 Wire Set, MOROSO, Straight, 8 mm, Black 249-73233 Wire Set, MOROSO, 135 Degree, 8 mm, Black VOLTAGE REGULATORS AND STARTER SOLENOIDS 103164 100-316A Voltage regulator, Black/Silver w/Autolite C5AF, 1965-67, 65 Amp Voltage regulator, “Solid State” Conversion, Black/Silver w/Autolite C5AF, 1965-67 Starter solenoid w/FoMoCo oval logo,1965 Starter solenoid w/FoMoCo, late 1965-66 11450 11450A SPARK PLUGS ATL45 CH-668 AR132 AR133 AR3932 NGK3442 NGK4050 Spark plug, ea, Autolite resistor, 18 mm, tapered, 13/16 hex, replaces BF42 Spark plug, ea, Champion racing V55C, 14 mm, tapered, 5/8 hex (equal to Autolite AR131, pictured) Spark plug, ea, Autolite racing, 14 mm, tapered, 5/8 hex Spark plug, ea, Autolite racing, 14 mm, tapered, 5/8 hex Spark plug, ea, Autolite racing, 14 mm, gasket, 5/8 hex Spark Plug, ea, NGK Racing, 14mm, tapered, 5/8 hex, R5673-9 (equivalent to Autolite 132) Spark Plug, ea, NGK Racing, 14mm, tapered, 5/8 hex, R5673-10 (equivalent to Autolite AR131) HIGH TORQUE ALTERNATORS 7058-100AMP-HD Alternator, Ford 100 amp, racing, one wire w/HD rectifier (OE body w/ regulator) C5AF-10A352-H Pulley, 3.87”, gold zinc finish, 1965-67, 289 Hi-Po, 1969-70 Boss 302 & Boss 429 C5AZ-10A310-B Fan, 13 blade, gold zinc finish, 1965-67, 289 Hi-Po (must paint black for 1965) 7127-1 Alternator, Delco Race, 1 wire, 85 amp, must drill long boss to 7/16 hole & make spacer (PICTURED) MOR64800 Pulley, Race, 5” diam, Ford & GM 21/32” shaft, aluminum, deep groove KRC-POW8162 Alternator, Powermaster, race, 1 Wire, 138 mm Denso, 50 AMP, 12 volt, heavy duty KRC-40140300 Pulley, race, Powermaster alternator, 2.5” diam, aluminum, single 3 groove HIGH TORQUE STARTERS Designed for use where space is at a premium or where extra torque is required to crank a high-compression engine. These starters are also excellent for solving oil pan and header clearance problems, and if you’re still not convinced you need one, excessive heat takes its toll on regular starters, but these lightweight units are made to take it. They add reliability for any hot-running high output engine. Big block starter has multiple rotation possibilities; can be indexed to where it works best for you. 244-MA49 289-302 Lightweight, standard trans w/large 164 tooth flywheel & bellhousing, high torque, includes solenoid lead 244-MA50 289-302 Lightweight, FLEXPLATE application, high torque, includes solenoid lead 244-MA55 289-302 Lightweight, FLYWHEEL application, high torque, includes solenoid lead 244-PSL101 390-427-428 FE Lightweight, FLEXPLATE or FLYWHEEL application, high torque, includes solenoid lead sales: 203-284-3863 email: sales@cobraautomotive.com 47 www.cobraautomotive.com Rev051112 ENGINES - VALVE COVERS COBRA OPEN LETTER ORIGINAL STYLE VALVE COVERS 1965-66 valve covers. These are an exact reproduction of the sand-cast version of the Cobra valve cover that was used in 1965 through early 1966 Shelby Mustang GT350. After that, the die-cast black wrinkle finish covers were used from mid-1966 to the end of the Shelby Mustang run in 1970. These covers were used on the 289 Cobras as well. They fit all 260-289-302 and 351 Windsor engines, and are virtually impossible to tell from the originals. They feature the same polished fins, inner baffles, and all proper hardware and trim. The perfect touch for any restored Shelby or small block Ford powered car. 100-VC1 Original style (pair) COBRA OPEN LETTER “TALL STYLE” VALVE COVERS These Cobra valve covers are similar to those used on the 1965 and early 1966 Shelby GT350’s but are engineered for use with more modern high RPM valve train components. Fits all 260-289-302 and 351 Windsor engines. They are taller than the original type, with a flat top to clear the roller rockers and the poly-locks required for today’s high RPM usage. Cast aluminum with highlighted fins. 100-VC2 Tall style (pair) COBRA OPEN LETTER “TALL STYLE” 5.0 VALVE COVERS These are same tall valve covers described above, except they are configured for 5.0 engines with the proper breather tube for closed emissions. They are taller than the original type with a flat top to clear the roller rockers and the poly locks required for today’s high RPM usage. Cast aluminum with highlighted fins. 100-VC50 Tall style for 5.0 engines (pair) SHELBY R-MODEL EXACT REPRODUCTION VALVE COVERS These are highly accurate reproductions of the steel valve covers used on the original 1965 Shelby GT 350 R-Model race cars as well as the 1967 Mustang group 2 Trans Am race cars. Equipped with breather tubes that are positioned towards the front of the engine; fits all 260-289-302 and 351 Windsor engines. (For use with roller rocker arms, they require spacers, which are sold separately). Supplied in bare steel. 100-VC65R (pair) 303-VCS-302 7/8” thick valve cover spacers, pair, cast aluminum, 289/302/351W COBRA COMPETITION MODIFIED FORD RACING VALVE COVERS We modify these polished die cast Ford Racing valve covers for competition use, with a machining operation that allows press-in breather tubes that are positioned towards the front of the engine. They are 3.75” tall and will clear most stud girdles and roller rocker arms and will fit all 260-289-302 and 351 Windsor engines. Supplied with a pair of pushon chrome breather caps with hose barbs for vent hoses for a breather/overflow tank. The supplied breather caps (#250-6766A) are pictured on page 48. 100-M6582-E302 (pair) sales: 203-284-3863 email: sales@cobraautomotive.com 48 www.cobraautomotive.com Rev051112 ENGINES - VALVE COVERS 428 FORD SUPER COBRA JET “SNAKE” DIE CAST VALVE COVERS These are exact copies of the original 1969-70 valve covers that came on Super 428 Cobra Jet powered vehicles and the ‘69-’70 GT500 Shelby Mustangs and Mach I’s. They were factory supplied on Super Cobra Jet engines and are on the accessory list above the plain finned Cobra Jet valve covers (the Ford part number in the Muscle parts catalog was C9ZZ-6582-B). They are perfect in every way, including the right die cast aluminum factory finish, just like the originals. Perfect for most all applications, as they have excellent valve train clearance and are low-profile enough so that you can still get to your spark plugs without master cylinder interference. Complete with internal baffles and spark plug loom brackets. Fits all 352-390-406-427-428 engines. 273-VC31 (pair) 428 FORD COBRA JET DIE CAST VALVE COVERS Exact reproductions of the original 1969-70 valve covers that came on many 428 Cobra Jet powered vehicles including ‘69-’70 GT500 Shelby Mustangs. Perfect in every way, including factory finish, these are die cast aluminum just like the originals, and easily one of the most attractive valve covers offered during the heyday of the 428 CJ engine. Like the Snake covers above, these have excellent valve train clearance and are low profile enough so that you can still get to your spark plugs without master cylinder interference. Complete with internal baffles and spark plug loom brackets. They will fit all 352-390-406-427-428 engines. 273-VC32 (pair) COBRA 427 ALUMINUM VALVE COVERS These are an exact copy of the optional aluminum valve covers that came on the 427 Cobras. Very high quality cast aluminum covers with highlighted fins, just like the originals. They will fit all 352-390-406-427-428 engines. Complete with internal baffles and spark plug loom brackets. 273-VC427 (pair) 1963-64 FORD 427 GALAXIE “BALDY” CHROME VALVE COVERS Exact reproduction of the famous 427 valve covers on the 1963-64 427 Galaxies. They were also used on 1964 Thunderbolt race cars along with 63-64 Lightweight Galaxies and the first big block GT40’s. Plating is not quite show chrome, but will make a nice addition to your classic 427 Ford engine. Unlike anyone else, our valve covers come complete with the proper 427 Bird decal installed on them. 100-VC35 (pair) with 427 Thunderbird decals 273-VC35 (pair) NO decals STK-427BIRD Decal (each) Ford 427 Thunderbird 427 PENT-ROOF VALVE COVER This popular chrome valve cover came on many 427 engines in the 60’s, including most 427 and 428 powered cars that included the 427 Cobras, 7 liter Galaxies, R-code 427 Fairlanes, and numerous racing vehicles of the day. These will fit all 352-390-406-427 and 428 engines, and will clear most all aftermarket roller rocker setups. They are outfitted with no breather holes, just like the originals, so a fill tube in the intake manifold and or a working PCV system will be required. Original valve covers are very hard to find and rechroming them today will cost between $200.00-300.00. 273-VC19E Pair, valve covers as pictured with emblems installed. 273-VC19 Pair, 390-428 engines without holes; no emblems 273-VC20 Pair, 390-428 engines with staggered breather holes, no emblems. EMB52 Emblem (each) sales: 203-284-3863 email: sales@cobraautomotive.com 49 www.cobraautomotive.com Rev051112 ENGINES - VALVE COVERS / BREATHERS / OIL PANS “POWERED BY FORD” 390 GT/428 COBRA JET VALVE COVERS These are extremely high quality reproductions of the original 390 GT and 1968-69 428 Cobra Jet valve covers. They are triple chrome plated to an even nicer finish than the originals. They are correct for 390 GT Mustangs from 67-70 and 1967-1969 428 Cobra Jet powered cars, including Mach 1’s. They will fit all FE engines, including 352-390406-427 and 428’s. Complete with original baffling inside and provisions for factory PCV grommet and twist on breather. An officially Ford licensed product. No more searching for old originals that will fit your needs. 273-VC33 (Pair) COMPETITION VALVE COVERS Cobra Automotive’s competition valve covers are made exclusively for us by MOROSO and are not available anywhere else. They come with integral breather tubes with 12 AN male fittings, fill bung and cap with steel inserts. These covers will work great in conjunction with our 100-OFT-WB over flow tank. 100-VC-COMP (Pair) MOROSO OVER FLOW TANK Cobra Automotive’s overflow tank is made exclusively for us by MOROSO. It’s designed for a custom fit for mounting on the driver’s side fender apron, just behind the radiator support. Beautifully fabricated with all-aluminum construction, it comes fitted with two -12 AN inlet bungs and a 3/8” NPT return bung. This is the exact same tank we use to handle the crankcase ventilation on our own 580 horse power vintage road race cars. Fits 1965 to 1970 Mustangs. 100-OFT-WB Overflow tank with twin breathers 100-OFT-Line Kit Braided Line Kit, for Cobra Automotive Overflow Tank, w/-12 “ProLite” black nylon hose & fittings AUTHENTIC BREATHER CAPS OFB2 EC564 250-6766A Chrome Cap, FoMoCo logo, push on, open emission, 65-66 V8 Chrome, Motorcraft logo, twist-on for open emission, 1967-68 V8 Chrome cap, FoMoCo logo, push-on for closed emission w/nipple for hose 1967 V8 100-OFT-WB COBRA AUTOMOTIVE SMALL BLOCK FORD COMPETITION OIL PAN Oil pan design can determine the difference between making or losing a significant amount of horsepower and reliability. When a 289 cubic inch race engine makes 560 horsepower, oiling is a serious matter, so COBRA AUTOMOTIVE enlisted Moroso to design its special Road Race Oil Pan, which is now standard equipment on every one of our race engines. Utilizing heavy duty aluminum construction with integrated “sump bash” guard, this pan is fabricated with billet CNC-machined front and rear main seals as well as billet rails for a leak-free fit. Inside, there is a removable solid windage tray above 4 trap doors with internal baffle to keep the 9 quarts of oil around the supplied specially braced pick-up. It has a 9-1/2” deep, 10” long front sump with Pro Style kick-outs and two ½” NPT sender bungs, one at the front and one on the left side. The ½” drain bung is at the left rear. Designed to fit 2-bolt or 4-bolt Dart and Ford 289-302 blocks, this oil pan will accommodate Ford early-style, late-style, and 5.0 style timing covers. By special arrangement, this pan is exclusively available from COBRA AUTOMOTIVE, and IS NOT available through Moroso or any of its dealers. 100-OIL PAN-COMP Oil pan and pick up OFB2 EC564 250-6766A WINDAGE TRAY Cobra Automotive uses the Canton Pro Louvered windage tray in our own vintage road race engines to keep “windage” around the crankshaft away from the oil in the sump while allowing oil coming off the crank to easily enter the sump. The one-way design keeps oil from the sump from getting into the rotating assembly during hard cornering, braking and accelerating. The benefits of using this windage tray are both horsepower savings and improved oil control. This 289-302 Ford windage tray for a front sump is designed to fit into stock and aftermarket oil pans. Mounting hardware sold separately. 20-931P Windage tray, Pro Louvered type, 289-302 small block, front sump 254-5501 ARP main stud kit, 2 bolt mains, Ford 289 and 302 blocks w/windage tray 154-5602 ARP main stud kit, 4 bolt mains, Ford Boss 302 and Dart Iron Eagle Ford Sportsman blocks w/windage tray sales: 203-284-3863 email: sales@cobraautomotive.com 50 www.cobraautomotive.com Rev051112 ENGINES - OIL PANS AVIAD SHELBY GT350 R-MODEL & COMPETITION COBRA OIL PANS Aviad oil pans were standard equipment on Shelby competition cars, such as GT350 R-models and the 289 and 427 competition Cobras. Those very same oil pans are offered today, and they deliver excellent track performance as well as vintage-correct appearance. All Aviad oil pans are full road race pans with custom oil pickups. 212-AV2 Oil pan, 289-302 R-Model, w/pickup, 7-1/2” deep x 12” wide x 10” long, 6 qt. 212-AV4 Oil pan, 289 Cobra road race w/pickup, 7-1/2” deep x 12” wide x 15” long, 8 qt. 212-AV3 Oil pan, 427 Cobra road race w/pickup, 6” deep x 12-1/2” wide x 18” long, 9 qt. 212-AV2 AVIAD BUD MOORE BOSS 302 TRANS-AM OIL PAN Aviad oil pans were standard equipment on Shelby competition cars, such as GT350 R-models and the 289 and 427 competition Cobras. Those very same oil pans are offered today, and they deliver excellent track performance as well as vintage-correct appearance. All Aviad oil pans are full road race pans with custom oil pickups. 212-AV5 Oil Pan, 289-302, Boss 302/Bud Moore T/A type Road Race w/pickup 8.5 deep x 13.5 wide x 12 long, 8 qt. AVIAD SMALL BLOCK ORIGINAL DESIGN GT-40 OIL PAN Aviad oil pans were used on the small block Ford GT40s, and this pan is exactly like the pans used on the 5 liter GT40s that won Le Mans in 1968 and 1969, defeating Ferrari and Porsche prototypes. This is a full road race pan, made to fit with the 142 tooth ring gear style bell housing, and comes complete with custom oil pickup. 212-AV6 Oil pan w/pickup for 142 tooth ring gear, 6-1/2” deep x 11-1/2” wide x 14” long, 8 qt. CANTON STREET/STRIP & ROAD RACE OIL PAN PANS Canton Racing Products offers a selection of Street/Strip pans for high performance street applications as well as Road Race pans, with proven oil control systems for competition use. Canton pans are fully Tig-welded from .059” steel with Gold Iridite plating for durability. Pickups are sold separately. 15-610 Oil pan, 289-302, street/strip, 8” deep x 13-1/2” wide x 8-1/2” long, 7 qt. 15-630 Oil pan, 289-302, road race, 8” deep x 13-1/2” wide x 10-1/2” long, 9 qt. 15-810 Oil pan, 390-428 FE big block, road race, 6” deep x 13” wide x 10” long, 8 qt. 15-820 Oil pan, 390-428 FE big block, road race, 6” deep x 13: wide x 10” long, 8 qt. 15-820 shown with 15-821 pickup SHELBY Cobra Lettered CAST ALUMINUM T-PAN A beautiful reproduction of the original cast aluminum pan that came on the original Shelby Mustangs. Beautifully reproduced, complete with the original hinged “trap door” baffles to control oil slosh. The fins and lettering are also highlighted as original. Available for big and smallblock engines. Uses stock dipstick. Pickups sold separately. 273-OP2 Oil pan, 289-302, Shelby GT350, Cobra lettered, finned aluminum T type, 7.5 qt. 273-OP5 Oil pan, 390-428 FE Big Block, Cobra lettered, finned aluminum T type, 6.5 qt. 390 GT 428 FORD COBRA JET OIL PAN Our reproduction Ford 390-428 Cobra Jet oil pan is an exact duplicate of the stock C6OZ6675-A oil pan on the 390 GT and 428 Cobra Jet engines. Perfectly made with factory lines and stamping detail, including the FoMoCo logo with production stamping date. Correct for 1966-69 Fairlanes, 1968-69 Torinos, 1967-70 Mustangs, 1967-70 Cougars, 1967-70 Shelbys, and 196669 Comets. It retains the factory capacity of 5 quarts, with duplicate internal factory baffling. Supplied in virgin bare metal finish, this is a Ford licensed product reproduced from original Ford blue prints. Fits all 390-427-428 engines. Pickup sold separately. C6OZ-6675-A Oil Pan, 390 GT- 428CJ, OE Style sales: 203-284-3863 email: sales@cobraautomotive.com 51 www.cobraautomotive.com Rev051112 ENGINES - OIL SYSTEM OIL PUMPS AND OIL PUMP DRIVES Melling has been the leading manufacturer of performance and racing oil pumps for over 65 years. These racing pumps feature extended drive shafts to prevent deflection at higher RPM’ and the high volume pumps flow 25% more due to their larger volume bodies. Our race-prepared version of the small block racing pump is a standard-volume unit for less parasitic drag, and the body and internal parts are Cryo treated and Teflon coated, then hand-assembled with a high pressure spring. A heavy duty oil pump drive is necessary, and we have found the ARP oil pump drives are the very best. 307-M68HV 289-302 high volume oil pump M-10687 Melling 289-302 race oil pump, std. volume CA-M10687 Melling 289-302 race pump, Cobra Auto race prepared, std. volume 307-68-S Oil pickup, 289-302, for OE-type pan 154-7904 Oil pump drive shaft, 289, 302, Boss 302, chrome moly 307-M57 Oil pump, 390-428, standard volume 307-M57HV Oil pump, 390-428 high volume 307-57S1 Oil pickup, 390-428 FE big block, for OE type pan 154-7902 Oil pump drive shaft, 390-428 FE big block, chrome moly SHELBY GT350 R-MODEL REPRODUCTION OIL COOLER KIT This is an exact reproduction oil cooler kit as used on the original Shelby GT350 R-model race cars and Group 2 Mustang coup race cars. Accurate reproductions of the Cobra oil cooler adapter, oil cooler, mounting brackets, attaching clamps, and black cloth-covered oil lines with correct style fittings. Individual components available separately. Availability is limited. 100-8500 Oil cooler kit, complete, R-model, reproduction, 289-302 100-8500-BRACKETS Brackets (pair) for R-model oil cooler, reproduction 100-8500-COOLER Oil cooler only, R-model, reproduction 313-RADPT Oil cooler adapter, COBRA 289-302, reproduction SHELBY GT350 R-MODEL REPRODUCTION OIL COOLER LINES These are the same lines supplied in the above kit, 5/8” black cloth-wrapped, re-enforced with fiber & steel braids and fittings that have the correct zinc dichromate plating. Meets SAE J1402 standards with a burst rating of 3,000 psi. 100-77-500 Line kit For OE style R-model oil coolers COMPETITION LIGHT WEIGHT OIL COOLER ADAPTER KIT This complete kit is specifically designed for use with our proprietary Griffin radiator with internal heat exchanger oil cooler. Comes with pre-assembled lines for early Mustang or Shelby race cars. Utilizes our reproduction aluminum Cobra oil cooler adapter for 289-302 engines. 100-7500 Oil cooler adapter kit for Griffin radiator with heat exchanger 313-RADPT Cobra oil cooler adapter only 1965 SHELBY GT350 REPRODUCTION OIL PRESSURE LINE Exact reproduction oil pressure line for the factory 1965 Shelby GT 350 Mustang, preassembled with proper Hexavalent-plated (chromium free) steel fittings. Black clothwrapped high pressure hydraulic line, 67” long and re-enforced with fiber & steel braids. Meets SAE 100R5 standards with a burst rating of 12,000 psi and a working pressure of 3000 psi. Don’t take chances with a line that’s over 40 years old. Perfect for replacing old original or incorrect lines on a 1965 Shelby or as a finishing touch on a restoration or “clone” project. Includes sending unit extention. 100-OPL65 Reproduction ‘65 GT350 Oil Pressure Line S1MS9B339R Sending unit extension only DIPSTICKS AND TUBES (Please call for applications not listed here). C5AZ-6750-BC Repro dipstick only, 1965-67, stainless handle, 289 C5AZ-6754-A Repro tube only, 1965, black, 289 M-6750-A302 Dip stick & tube, Chrome, Ford Racing, 289-351W Dip Stick+Tube CJ Repro chrome CJ dipstick w/steel tube, 428CJ, 66-67 390 GT sales: 203-284-3863 email: sales@cobraautomotive.com 52 www.cobraautomotive.com Rev051112 ENGINES - COOLING SYSTEM GRIFFIN ALUMINUM SHELBY/MUSTANG COMPETITION RADIATORS Competition Mustang radiator #260-001R Griffin supplies radiators to many of the NASCAR teams. These special competition radiators are built by Griffin exclusively for Cobra Automotive. With 580 hp on tap, our vintage road race cars require the most efficient radiator we can fit into an early Mustang or Shelby. These radiators are made by Griffin to our exact specifications for a boltin fit, while retaining a stock-type appearance. These special aluminum radiators utilize factory radiator hoses, original R-model type mounting points and radiator cap location for ease of installation and maintenance. They can be ordered with a built-in Delphi heat exchanger, which uses lower water temperature to scrub off excessive oil temperature. We have seen as much as a 20-30 degree drop in oil temperature when using a heat exchanger type oil cooler. Our ultimate competition version, pictured here, also uses a reversed inlet hose position to ensure that coolant flows across the entire width of the oversize core. These units require the radiator support opening to be enlarged to fit the 23” wide by 16” tall double row core of 1-1/4” tubes. 260-001R Radiator with heat exchanger (pass. side fill neck w/ no recess; driver side inlet) rated for 600 hp 260-001 Radiator with heat exchanger (driver side fill neck; pass. side inlet) rated for 600 hp 260-002 Radiator, no heat exchanger (driver side fill neck; pass. side inlet) rated for 600 hp GRIFFIN ALUMINUM 289 COBRA COMPETITION RADIATOR This aluminum 289 Cobra competition radiator is also exclusively made for us by Griffin and is rated to handle 400 to 500 hp, depending on the air flow characteristics of your car. Our many seasons of successful experience campaigning 289 Cobras in vintage road racing has proven the performance and reliability of this unit. While designed to fit original 289 Cobras, this radiator can be adapted to fit replicas as well. 260-010 Competition radiator, 1963-65 289 Cobras, rated for up to 500 hp 289 Cobra radiator #260-010 GRIFFIN ALUMINUM SHELBY/MUSTANG PERFORMANCE RADIATORS If you don’t want to modify the radiator support in your car but still need the extra cooling capacity for a high horsepower engine, here are some offerings that will do the job. The two 600 hp rated radiators feature a double-row core of 1-1/4” tubes which will fit the stock radiator support without having to enlarge the opening. The two units rated for 400 hp have a double row of 1” tubes and will also fit without the need to modify the radiator support opening. 260-003 Radiator for stock application, 1965-66, w/oil cooler, manual trans., rated for 600 hp 260-005 Radiator for stock application, 1965-66, no cooler, manual trans. rated for 600 hp 260-004-A Radiator for stock application, 1965-66 w/auto trans. rated for 400 hp 260-004-M Radiator for stock application, 1965-66, manual trans. rated for 400 hp Custom Griffin Mustang radiator with both outlets on same side #260-003 sales: 203-284-3863 email: sales@cobraautomotive.com 53 www.cobraautomotive.com Rev051112 ENGINES - COOLING SYSTEM LOWER RADIATOR HOSE SPRINGS FOR ‘65-’70 MUSTANG Stainless springs made just for us, to keep your lower hose from collapsing and prevent overheating. Replace your rusty ones; these are an an absolute MUST. 100-RHS-SB Small block Mustang 1965 – 70, 13” long x 1.625” O.D. 100-RHS-BB Big block Mustang 1967 – 70, 8” long x 1.625” O.D. RADIATOR CAPS AND HOSES These high pressure radiator caps are what we use on our vintage road race cars. We also carry thermostats, water restrictor kits and Concours MCA-approved radiator caps and hose sets. ALL-30134 STA10229 GAT21953 GAT20475 GAT20573 GAT20615 Radiator cap, Stant racing, 19-22 lb Radiator cap, Stant, 13 lbs Radiator hose, Gates, upper, 1965-70 Mustang, 289-302 Radiator hose, Gates, lower, 1965-70 Mustang, 289-302 Radiator hose, Gates, upper, 1967-70 Mustang, 390-428 Radiator hose, Gates, lower, 1967-70 Mustang, 390-428 HI PERFORMANCE ALUMINUM WATER PUMPS Water pumps made by Edelbrock and Stewart Components are both approved by NASCAR. They offer improved impeller design for more flow, and oversized bearings for extended impeller shaft life. Aluminum construction reduces weight while dissipating heat better than OE iron pumps (Stewart pump has the most original appearance). 231-16103 Stewart pump, early 289-351W, open back, for early timing cover 215-8842 Edelbrock pump, early 289-351W, open back, for early timing cover 215-8841 Edelbrock pump, later 289-351W, closed back 215-8805 Edelbrock pump, 390-428 engines Small block Big block LIGHTWEIGHT COOLING FANS Light weight and inexpensive, these fans work very well on the street or for competition use. Plastic flex-blade design produces minimal drag, yet still provides maximum cooling. No electric fans to fail, also very easy on water pump bearings. FLX415 15” Competition FLX416 16” Semi competition FLX417 17” Street FORD 289 HI-PO FAN FOR 1965-66 SHELBY GT350 MUSTANG Our 289 Hi-Po fan looks correct on any 289 Hi-Po engine. Correctly-riveted to match the original and high speed balanced. It is also correctly marked just like the original, with S–C3A0-C. These fans were unavailable for some time, so if you’ve been waiting for one to use on your car, the good news is that we have them. 273-FAN1 Reproduction factory 289 high performance fan sales: 203-284-3863 email: sales@cobraautomotive.com 54 www.cobraautomotive.com Rev051112 ENGINES - PULLEYS / BALANCERS ALUMINUM PULLEYS CNC machined billet aluminum pulleys for precision alignment. These are specially underdriven to turn water pumps and alternators slower and free-up more horse power. 100-1561/1932 100-1631/1632 312-1545 312-1560 312-1561 312-1562 312-1910 312-1911 312-1912 312-1930 312-1931 312-1932 Set, 20% underdrive, 2 groove, 289 (3 bolt crank pulley, RH pump) Set, 20% underdrive, 2 groove, 289 (4 bolt crank pulley, LH pump) Pulley, crank, 5-3/4”, 2 groove, 4 bolt, 289-351W Set w/alt pulley, 10% underdrive, 2 groove, 289-351W (3 bolt crank pulley, RH water pump) Pulley, crank, 5-1/2”, 2 groove, 3 bolt, 289-351W Pulley, water pump, 6”, 2 groove, 289-351W Pulley set w/alt pulley, 10% under drive, 1 groove, 390-428 FE Pulley, crank, 5-1/2”, 1 groove, 390-428 FE Pulley, water pump, 6-3/4”, 1 groove, 390-428 FE Pulley set w/alt pulley, 10% under drive, 2 groove, 390-428 FE Pulley, crank, 5-1/2”, 2 groove, 390-428 FE Pulley, water pump, 6-3/4”, 2 groove, 390-428 FE SFI APPROVED HARMONIC BALANCERS Harmonic balancers are extremely important to the performance and reliability of any high performance or competition engine. Torsional vibrations will loosen or break bolts, allow main caps to move around on blocks and cause crankshafts to break. Crank twist is detrimental to cam timing and will cause power loss as well as promote crank failure. Premium Elastomer harmonic balancers offer outstanding durability and superior high frequency dampening. For all out competition use, we recommend ATI Super Balancers and BHJ balancers which are available in all-steel or aluminum and steel configurations. Please consult with our engine department for the best SFI approved balancer for your application and to ensure correct fit to pulleys and timing location. ATI-917660AK FO-IB289-7 ATI-917660AK 90006 80009 ATI 289-302, zero balance, steel hub w/aluminum outer, early 289 timing location, for 3 bolt pulley, 6.325” BHJ 289-302, zero balance, steel, early 289 timing location, for 3 bolt pulley, 6.2” Professional Products, ‘63-’69 289-302, 28 oz. ext. balance, fits 3 or 4 bolt pulley, 6.4” Professional Products, BB Ford FE, w/ removable single groove pulley, 7.5” 289 FORD HI-PO HARMONIC BALANCER 289 Hi-Po Balancer This is a high-quality, exact reproduction of the original 289 Hi-Po harmonic balancer, made from the original Ford blueprints and identical in every manner with the exception of the Ford markings. Cast from high quality iron, fully-balanced and packaged in a box with the part number of C6OE-6316-A on it. This balancer is correct in appearance and will bolt onto any 289 Hi-Po engine from 1963-67. It will also fit any 289 with a standard 28 oz external balance to give it the 289 Hi-Po look. Will accept 3 bolt crank pulleys. 289-Hi-Po Balancer Harmonic balancer, ‘63-’67 289 Hi-Po, 28 oz. external balance for 3 bolt crank pulley 428 FORD SUPER COBRA JET HARMONIC BALANCER This is a high-quality reproduction of the original 428 SCJ harmonic balancer (original part number C8AE-6316-C). It’s made from the original Ford blueprints and is identical in every manner with the exception of the Ford markings. A fully balanced, new replacement unit that will eliminate the old balancer with dried out rubber which allows the timing marks to move. The 428 SCJ balancer was unique to this engine because of the heavy duty connecting rods used in the rotating assembly. This will be correct and will bolt onto any 428 SCJ engine from 1969-70. 428-SCJ Balancer Balancer and counter weight, 428 Super Cobra Jet only, 1969-70 sales: 203-284-3863 email: sales@cobraautomotive.com 55 www.cobraautomotive.com Rev051112 ENGINES - EXHAUST SYSTEMS STREET/STRIP EXHAUST HEADERS Internal combustion engines are big air pumps, volumetric and thermal efficiency are keys to power and reliability. For street/strip applications we offer headers from Hooker and Stan’s Headers. Hooker uses the 4-into-1 design with long transition collectors for reduced back pressure and increased flow. The Stan’s Tri-Y headers are the best fitting Tri-Y’ s we’ve ever found. They offer nice spark plug clearance on small bolt-pattern heads with the 351W plug placement and provide an excellent overall fit. Optional silver ceramic high-temp coating inside & out is available, and we can also apply an additional “period correct” looking flat black top coating. Street/Strip headers will work with mechanical clutch linkages. 260Y-RAW 65-70 Mustang, Tri-Y, 289-302 w/351W or aftermarket head, small bolt pattern, exc. Edelbrock 293-6901 Hooker Comp, 65-70 Mustang, 289-302, Std. 289 head bolt pattern, 1-5/8” primary & 3” collector 293-6208 Hooker Super Comp, 65-70 Mustang w/351W, Dart head wide bolt pattern, 1-3/4” primary & 3” collector 293-6114 Hooker Super Comp, 67-70 Mustang, 390-428 FE exc. 67 390 GTGT500, 1-3/4” primary & 3” collector 100-COAT High temp silver ceramic coat single piece headers inside & out 100-COAT-ADDBLK Additional for flat black coating on outside only of headers COMPETITION ROAD RACE EXHAUST HEADERS Competition engines move so much air at high RPM that proper application of header design theory is crucial. With racers spending large sums of money on modified induction systems, it is only logical that an equal amount of attention be given to the exhaust “exit” side of the equation. Our competition road race headers are built exclusively for us under a proprietary arrangement with one of the cutting-edge manufactures in the industry. It’s all about gas particle movement and pressure wave activity. Our designer spent over 17 years in NASCAR Cup Racing, pioneering several advancements in exhaust technology in that field. The result is that these headers are the ultimate small block Ford road race headers available. Multiple step primary tubes mated with special merge-style collector is the secret to our header design. In backto-back Dyno tests, these headers consistently show as much as a 30 HP increase over the leading race headers. An absolute must on all 500+ horsepower 289-302 road race engines. All competition headers are built to order. Headers for Mustangs must be specified for hydraulic or mechanical clutch applications. Cobra headers are sold without side pipes which must be specified separately. 100-EE-A100 65-66 Mustang, Tri-Y, s.s. stepped, S.B. Ford, std. 289 head bolt pattern, 3” collector (specify hyd. or mech. clutch) 100-EE-A200 65-66 Mustang, Tri-Y, s.s. stepped, S.B. Ford, RHS, World, Dart head, wide bolt pattern, 3” collector, (specify hyd. or mech. clutch) 100-EE-B100 67-70 Mustang, Tri-Y, s.s. stepped, S.B. Ford, Std 289 head bolt pattern, 3” collector, (specify hyd. or mech. clutch) 100-EE-B200 67-70 Mustang, Tri-Y, s.s. stepped, S.B. Ford, RHS, World, Dart head, wide bolt pattern, 3” collector, (specify hyd. or mech. clutch) 100-EE-B300 67-70 Mustang, Tri-Y, s.s. stepped, Boss 302 Cleveland head bolt pattern, 3” collector, (specify hyd. or mech. clutch) 100-EE-Custom Custom built to order, custom s.s. S.B. Ford, specifications & pricing subject to review 100-EE-G100 289 Cobra, Tri-Y, s.s. stepped, S.B. Ford, std 289 head bolt pattern, 3” collector, for hyd. clutch linkage 100-EE-G200 289 Cobra, Tri-Y, s.s. stepped, S.B. Ford, RHS, World, Dart head, wide bolt pattern, 3” collector, for hyd. clutch 100-EE-G300 289 Cobra, 4-into-1, s.s. stepped, S.B. Ford, std 289 head bolt pattern, 3” collector, for hyd. clutch linkage 100-EE-G400 289 Cobra, 4 into 1, s.s. stepped, S.B. Ford, RHS, World, Dart head, wide bolt pattern, 3” collector, for hyd. Clutch 100-EE-Sidepipe 289 Cobra side pipes, s.s. 3” diameter, specify length, type of brackets & angle of cut sales: 203-284-3863 email: sales@cobraautomotive.com 56 www.cobraautomotive.com Rev051112 ENGINES - EXHAUST SYSTEMS ‘65 SHELBY SIDE EXHAUST This is the classic 1965 Shelby side exhaust system, faithfully reproduced in the original 2” diameter, compression bent just like the originals, but from longer lasting aluminized tubing. Ready to install, this complete system includes 2 each of the following: intermediate pipes, glasspacks, and tailpipes that exit in front of the rear wheels. The additional hanger kit is almost identical to the original that was used on the early production 1965 Shelbys. Collectors are also listed as an additional item if needed (see below). The 2-1/2” version is recommended for semi-competition or high-horsepower engines, and will be noticeably louder than the 2” system. This exhaust system is perfect for a restoration or “re-creation” project. Not street legal in some states. C5ZZ5257SSE Dual side exhaust system, 1965 Shelby style, original 2” size w/ glasspacks, for use w/headers C5ZZ5257STH Dual side exhaust system, 1965 Shelby style, oversize 2-1/2” w glasspacks, for use w/headers MHCC1 Collectors (pair) for use w/Tri-Y headers, 2” Shelby-style side exhaust MHCC3 Collectors (pair) for use w/Tri-Y headers, 2-1/2”, Shelby-style side exhaust MHK09 Hanger kit for 1965 Shelby 2” side exhaust MHK10A Hanger kit for 1965 Shelby 2-1/2” side exhaust COMPETITION 3” OPEN SIDE EXHAUST SYSTEMS Cobra Automotive’s 3” diameter aluminized “open” side exhaust system is as simple, lightweight, and free-flowing as an exhaust system can get. All “slip fit” for easy assembly, includes four straight sections 36” long, two 45 degree elbows and 2 heavy duty hangers. Welding is required for installation, and requires 3” header collectors. The final installed length is 66” to the exit point in front of the rear wheels. This kit is also available with an “H” pipe which is supplied as two un-assembled “fish mouthed” sections to be final slip-fit and welded together. The advantage to running an “H” pipe is added horsepower through the RPM range due to equalization of the pressure waves. Fully adjustable to accommodate your headers; holes must be put into the intermediate pipes at the proper point and then the ‘H” must be cut-to-fit and welded into position. Additional flange kit will be required if bolt-on type header collectors are used. 100-EXOS-3 Side exhaust, open, 3” aluminized, all slip fit, 66” long, trim to fit 100-EXOS-3H Side Exhaust, Open, w/H-pipe, 3” Aluminized, all slip to fit, 66” long, trim to fit COMPETITION 3’ MUFFLED, DOWN TURNED EXHAUST SYSTEMS Cobra Automotive’s 3” diameter aluminized muffled, down-turned exhaust system is designed for race venues with sound restrictions. Low back-pressure Moroso Spiral Flow race mufflers cut noise by 5 to 7 decibels on their own. In total, this system can bring the overall decibels down from the 112-115 level to 100 decibels or less. Check your track’s decibel limits and the location of the meters around the track. All “slip fit” for easy assembly; includes four straight sections, two mufflers, two down-turned tips and two heavy duty hangers. Welding is required for installation and requires 3” header collectors. The final installed length is 79” to the exit point in front of the rear wheels. This kit is also available with an “H” pipe which is supplied as un-assembled “fish mouthed” sections to be final slip-fit and welded together. The advantage to running an “H” pipe is added horsepower throughout the entire RPM range through equalization of the pressure waves. Fully adjustable to accommodate your headers, holes must be made in the intermediate pipes at the proper point, and then the ‘H” must be cut-to-fit and welded into position. Additional flange kit will be required if bolt-on type header collectors are used. 100-EXMD-3 Under car exhaust, muffled, 3” aluminized, w/downturns, all slip fit, 79” long, trim to fit 100-EXMD-3H Under car exhaust, muffled, w/H-pipe, 3” aluminized, w/downturns, all slip fit, 79” long, trim to fit sales: 203-284-3863 email: sales@cobraautomotive.com 57 www.cobraautomotive.com Rev051112 ENGINES - EXHAUST SYSTEMS MUFFLERS, EXHAUST TURN DOWNS & FLANGES We offer a full selection of items to install or complete your exhaust system. For example, the Moroso Spiral Flow mufflers (pictured at right) are the same low restriction all-steel mufflers we use on our vintage race cars. Much more than low restriction mufflers, they feature specially engineered spiral baffles that cancel noise with minimal back pressure. These are the next-best thing to running an open exhaust for an absolute maximum free-flow. They will also effectively lower the decibel level by 5-7 decibels over open collectors. Also listed below is the classic Cherry Bomb street glasspack for true, vintage sound, and two Dynomax muffler styles that we frequently use on restorations. One of the Dynomax mufflers features is the inlet and outlet at the same end, for building special application exhaust systems. Please call for items you need that are not listed here. 87516 DMX-17733 DMX-17676 MOR94051 MOR94052 SPN-344DSC DMX-42448 HOK11425 HOK11430 HOK11435 Street muffler, Cherry Bomb glasspack, 29-1/2” long, 2-1/2” in & out Street muffler, Dynomax, Super Turbo 14” body 18.5” length, openings are in center on one end and offset on opposite end. 2-1/2” in & out; fully reversible for ease of installation Street muffler, Dynomax, Super Turbo 14” body 15.5” overall, 4-1/4” X 9-3/4”, 2-1/2” inlet and outlet are on same end Race muffler, Moroso Spiral Flow, 3” in & out, 12” overall Race muffler, Moroso Spiral Flow, 3-1/2” in & out, 12” overall Race muffler, Spin Tech Racing, 4” x 10” x 13”, 3” in & out Exhaust turn down, Dynomax, 3” ID (slip-fit) x 12” overall Exhaust flanges (3 bolt) w/gaskets, 2-1/2” Exhaust flanges (3 bolt) w/gaskets, 3” Exhaust flanges (3 bolt) w/gaskets, 3-1/2” EXHAUST SPACERS FOR BIG BLOCK FORD FE These are reproductions of the cast iron spacers used on the passenger side between the exhaust manifold and factory H-pipe on big block Ford FE engines. They are patterned after the Ford originals but have no butterfly or hardware. The smaller spacer is for the 390 GT or 428 Police Interceptor engines and replaces the heat riser valve which is often no longer functioning or even leaking. The larger spacer is for the 428 Cobra Jet engine, again fitting between the exhaust manifold and factory H-pipe. We also offer the correct “doughnut” gasket for either application. These pieces are next to impossible to find elsewhere, so we make them right here. 100-ES1311 100-ES1242 239-60985 C89450A 239-60025 F-524 Exhaust spacer, Ford 390 GT & 428 PI big block engine, 2” Exhaust spacer, Ford 428 Cobra Jet big block engine 2-7/16” Doughnut gasket, 390 & 428 except CJ, 2” cast steel Doughnut gasket, 428CJ & Boss 429, 2-1/8” cast steel Gasket, exhaust spacer, 428 Cobra Jet w/manifold spacer Studs, exhaust pipe to manifolds, 390 & 428 sales: 203-284-3863 email: sales@cobraautomotive.com 58 www.cobraautomotive.com Rev051112 ENGINES - FASTENERS Connecting Rod Bolt Kits 289-302 standard 5/16.......................................................................................................................................154-6002 Boss 302 & 351W...............................................................................................................................................150-6004 FE 390-428.........................................................................................................................................................155-6002 428 Cobra Jet.....................................................................................................................................................155-6001 Oil Pan Stud kits 289-302-351C & 351W (early) black oxide, Hex nuts........................................................................................254-1901 289-302-351C & 351W (early) black oxide, 12 point nuts..................................................................................254-1902 289-302-351C & 351W (early) Stainless, Hex nuts............................................................................................454-1901 Timing Cover & Water Pump Bolts 289-302 timing cover & cast-iron water pump, black oxide, Hex.......................................................................154-1502 289-302 timing cover & cast-iron water pump, black oxide, 12 point.................................................................154-1501 289-302 timing cover & cast-iron water pump, Stainless, Hex...........................................................................454-1502 289-302 timing cover & aluminum water pump, black oxide, Hex......................................................................154-1504 289-302 timing cover & aluminum water pump, black oxide, 12 point...............................................................154-1503 289-302 timing cover & aluminum water pump, Stainless, Hex.........................................................................454-1504 Main bolt Kits 289-302 2 bolt main............................................................................................................................................154-5001 289-302 4-bolt main...........................................................................................................................................154-5201 351W 2-bolt main...............................................................................................................................................154-5003 351W 4-bolt main...............................................................................................................................................154-5203 351C 4-bolt main................................................................................................................................................154-5204 390-428 FE.........................................................................................................................................................155-5201 Intake Manifold Bolt Kits 260-351W, uses 3/8 socket, black oxide, Hex....................................................................................................154-2001 260-351W, uses 3/8 socket, black oxide, 12 point.............................................................................................154-2101 260-351W, uses 3/8 socket, Stainless, Hex.......................................................................................................454-2001 390-428 FE, black oxide, Hex............................................................................................................................155-2002 390-428 FE, black oxide, 12 point......................................................................................................................155-2102 390-428 FE, Stainless, Hex................................................................................................................................455-2002 Main Stud Kits 289-302 2 bolt main............................................................................................................................................154-5401 289-302 with windage tray 2 bolt main...............................................................................................................254-5501 Boss 302 with windage tray 4 bolt main.............................................................................................................154-5602 351W 2-bolt main...............................................................................................................................................154-5403 351W 4-bolt main...............................................................................................................................................154-5606 390-428 FE, Hex nuts........................................................................................................................................155-5401 390-428 FE, 12 point nuts .................................................................................................................................155-5421 Carb Stud Kit Standard 5/16 X 1.7” black oxide......................................................................................................................200-2401 1’’ Spacer 5/16 X 2.7” black oxide......................................................................................................................200-2402 2” Spacer 5/16 X 3.7” black oxide......................................................................................................................200-2404 Head Bolt Kits 289-302 with factory heads, Hex........................................................................................................................154-3601 289-302 with factory heads, 12 point.................................................................................................................154-3701 302 with 351W heads, 1/2 to 7/16 insert washer w/ 7/16 bolts, Hex..................................................................154-3605 302 with 351W heads, 1/2 to 7/16 insert washer w/ 7/16 bolts, 12 point...........................................................154-3705 351W with factory heads, Hex............................................................................................................................154-3603 390-428 FE with factory heads, Hex..................................................................................................................155-3601 390-428 FE with Blue Thunder heads, Hex........................................................................................................155-3604 427 SOHC, Hex..................................................................................................................................................155-3602 Harmonic Balancer Bolt Kit 260-428, black oxide, 12 point...........................................................................................................................150-2501 Cam bolt kit 260-302, 1965-68, 3/8-16 x 1.460”.....................................................................................................................154-1001 302-351W, 1969 & later, 3/8-16 x 1.580”............................................................................................................155-1001 390-428 FE, 7/16-14 x 1.750”............................................................................................................................155-1002 Oil Pump Drive Shaft (Heat treaded chrome molly steel) 289-302 and Boss302........................................................................................................................................154-7904 351W..................................................................................................................................................................154-7901 390-428 FE.........................................................................................................................................................154-7902 Head Stud Kits 289-302 with factory heads, 7/16, Hex nuts.......................................................................................................154-4001 289-302 with factory heads, 7/16, 12 point nuts.................................................................................................154-4201 289-302 with 351W heads, 1/2 to 7/16 insert washer w/7/16-14 cyl. block thread, Hex nuts............................154-4005 289-302 with 351W heads, 1/2 to 7/16 insert washer w/7/16-14 cyl. block thread, 12 point nuts......................154-4205 Boss 302, Hex nuts............................................................................................................................................154-4002 Boss 302, 12 point nuts......................................................................................................................................154-4202 351W with factory, SVO high port, Edelbrock aluminum, iron Dart heads w/ 1/2-13 cyl. block thread, 12 point nuts...........................................................................................................154-4203 As Above with Undercut Studs...........................................................................................................................254-4703 390-428 FE with factory heads, Hex nuts..........................................................................................................155-4001 390-428 FE with factory heads, 12 point nuts....................................................................................................155-4201 390-428 FE with Blue Thunder heads, 12 point nuts.........................................................................................155-4204 427 SOHC, Hex nuts..........................................................................................................................................155-4002 427 SOHC, 12 point nuts...................................................................................................................................155-4202 Flywheel Bolt kit 7/16 X 1.00” black oxide, 289-428......................................................................................................................100-2801 7/16-20 x .950” black oxide, Tilton flywheel........................................................................................................350-2801 Flex Plate kit 7/16 X .680” black oxide, 289-428 ...................................................................................................................100-2901 Pressure plate bolt kits 5/16-18 w/ 1/2” head size, 289-460 1985 & earlier............................................................................................150-2201 Metric 8 x 1.25, 302-351W 1986-95...................................................................................................................150-2202 3/8-16 w/ 9/16”” head size, 265-502 Chevy.......................................................................................................130-2201 OIL SEALS Inner Front Wheel Bearing Seal 64-73 Mustang w/ V8 Disc & Drum except 69 Boss, 70 GT350 & GT500................................................................ 6815 69 Boss 302 Mustang & 70 Shelby GT350 & GT500..............................................................................................9150S Rocker Arm Stud Kits 3/8-24 x 1.750”, Typical small block application .............................................................................................. 134-7101 3/8-24 x 1.895”, Typical small block application w/ roller rockers.......................................................................134-7104 7/16-20 x 1.770”, Typical small block application...............................................................................................134-7103 7/16-20 x 1.900”, Typical small block application w/ roller rockers & girdles......................................................100-7101 Rocker Arm Adjusters - Perma-Loc 3/8-24 x .620 diam. Stamped steel rockers....................................................................................................... 300-8241 7/16-20 x .640 diam. Stamped steel rockers......................................................................................................300-8242 3/8-24 x .550 diam. Aluminum rockers...............................................................................................................300-8243 7/16-20 x .550 diam. Aluminum rockers.............................................................................................................300-8245 Rear Axle Seals 64-66 Mustang w/ V8 (fits # RW-207-CCRA bearing)..................................................................................... NAT51322 67-73 Mustang ALL w/ 1-3/8” shaft (28 spline) except WCY axle (fits # RW-207-CCRA bearing)...................NAT9569S 69-73 Mustang ALL w/ 1-1/2” shaft (31 spline) except WCY axle (fits # RW-207-CCRA bearing)..................NAT9363S 67-70 Mustang ALL with WCY axle (fits # RWF-34-R bearing).......................................................................... NAT9161 57-72 old Ford large bearing (fits # 514003 bearing)....................................................................................... NAT51098 74-79 new Ford large bearing (fits # A-20 tapered roller bearing)...................................................................... NAT3195 Valve Cover Stud Kits Small Block, Aluminum, 1/4-20 x 1.500”, black oxide, Hex nuts........................................................................200-7604 Small Block, Aluminum, 1/4-20 x 1.500”, black oxide, 12 point nuts..................................................................200-7614 Small Block, Aluminum, 1/4-20 x 1.500”, Stainless, Hex nuts............................................................................400-7604 Pinion Seal 66-73 Mustang w/ Ford 9”............................................................................................................................. NAT7044NA 66-73 Mustang w/ Ford 9”, O-Ring for pinion seal above.................................................................................... 248PKG 64-79 Mustang w/ Ford 8”............................................................................................................................. NAT8181NA Header Bolts & Kits 3/8-16 x ¾”, black oxide, Hex, 16 pcs................................................................................................................ 100-1102 3/8-16 x ¾”, black oxide, 12 point, 16 pcs..........................................................................................................100-1202 3/8-16 x ¾, Stainless, Hex, 16 pcs..................................................................................................................... 400-1102 3/8-16 x ¾, Stainless, 12 point, 16 pcs..............................................................................................................400-1202 3/8-16 x ¾ .53” flange, Stainless, Hex, EACH................................................................................................. TS-2-0830 3/8-16 x ¾ .63” flange, Stainless, Hex, EACH................................................................................................. TS-2-0880 Manual Transmission Input Shaft Seal 64-73 Mustang, Borg Warner T-10 & Ford toploader, small spline 1-1/16..................................................... NAT482208 67-73 Mustang, 390-429 w/ Ford toploader, big spline 1-3/8”........................................................................ NAT330663 Jerico 4 speed...............................................................................................................................................JER-N11123 Manual Transmission Tail Shaft Seal 64-73 Mustang, 260-351W & 390 w/ Ford toploader, 28 spline-1.500” shaft................................................. NAT470059 64-73 Seal & Bushing kit for above.................................................................................................................... NAT5201 64-73 Mustang, 390-429 w/ Ford toploader, 31 spline-1.690” shaft............................................................... NAT473234 64-66 Borg Warner T-10 Transmission.............................................................................................................NAT7692S 64-66 Seal & Bushing kit for above.................................................................................................................... NAT5202 Jerico 4 speed.................................................................................................................................................... NAT9449 Oil Pan Bolt Kits 289-302-351C & 351W (early) black oxide, Hex................................................................................................254-1802 289-302-351C & 351W (early) black oxide, 12 point..........................................................................................254-1801 289-302-351C & 351W (early) Stainless, Hex...................................................................................................454-1802 390-428 FE, black oxide, Hex............................................................................................................................255-1802 390-428 FE, black oxide, 12-point......................................................................................................................255-1801 390-428 FE, Stainless, Hex................................................................................................................................455-1802 sales: 203-284-3863 Automatic Transmission Tail Shaft Seal 67-70 Mustang 289-351W small block C4 Transmission.................................................................................NAT7692S 67-70 Mustang 289-351W Seal & Bushing kit C4 Transmission........................................................................ NAT5202 67-70 Mustang 390-428 big block C6-FMX Transmission...............................................................................NAT7300S 67-70 Mustang 390-428 Seal & Bushing kit C6-FMX Transmission.................................................................. NAT5203 email: sales@cobraautomotive.com 59 www.cobraautomotive.com Rev051112 ENGINES - RACE-PROVEN GASKETS CYLINDER HEAD GASKET 239-1011-1 239-1011-2 239-1021 239-1022 239-1023 239-1133 239-1020 239-VS13264C 239-1636 239-VS13264T High-performance 260/289/302, 1962-82, pre flattened copper wire, steel core laminate, 4.100 bore/.041 thickness, compressed volume 9.0 cc High-performance Dart 289-302 head & 302 1983-95, pre-flattened copper wire, steel core laminate, 4.100 bore/.039 thickness, compressed volume 8.5 cc Boss 302 pre-flattened steel wire/steel core laminate 4.100 bore/.041 thickness compressed volume 9.2 cc 302 SVO/351W SVO w/large overbore pre-flattened steel wire/steel core laminate LH 4.150 bore/.041 thickness, compressed volume 9.5 cc 302 SVO/351W SVO w/large overbore pre-flattened steel wire/steel core laminate RH 4.150 bore/.041 thickness, compressed volume 9.5 cc Competition 289/302 PermaTorque multi layered steel, 4.100 bore/.041 thickness, compressed volume 8.8 cc 390/427/428FE big-block head gaskets pre-flattened steel/wire steel core laminate 4.400 bore/.041 thickness, compressed volume 10.1 cc 239-VS13049C 239-1632 OIL PAN GASKET 239-OS13260C 239-OS30214C 239-OS11701C 239-1809 239-1810 239-1817 239-1262 239-1248 BLP8085-047 BLP8085-062 BLP8085-095 BLP8085-120 239-1246 239-1247 239-70135 239-1416 239-1427 239-1487 239-1442 239-1485 239-2901 260/289/302/351W all stock and small race-port heads port size 1.20 x 2.00, thickness .060 260/289/302/351W large race-port / World Products, “N” heads and GT40, port size 1.28 x 2.10, thickness .060 Boss 302, all, port size 1.88 x 2.65, thickness .060 289-302, Competition .047 thick 289-302, Competition .062 thick 289-302, Competition .095 thick 289-302, Competition .120 thick 428CJ/428SCJ / standard and low-riser 427, port size 1.40 x 2.34 390/428 medium riser 427 port size 1.40 x 2.10 239-2902 239-2922RS 239-2942RS 239-BS30136 239-BS40042 239-BS30138 239-TCS45008 289/302/Boss 302, without seal saver 239-TCS45449 302 late model, 1985–95, without seal saver 239-TCS13075-1 390/427/428FE, without seal saver 239-2707-1 260/289/302, 1962-11/30/82, without seal saver 239-2709-1 351W, 1969-7/10/83, without seal saver 239-2720 390/427/428FE, without seal saver THERMOSTAT GASKET 260/289/302/ stock or small race port, port size 1.25 x 1.48 Boss 302 port size 1.89 x 2.19 289/302 “ N” head, trick flow ”R”, port size 1.65 x 1.60 302 dart and TFS, E351 dual bolt pattern stock Ford and inline spread bolt, port size 1.42 x 1.62 390/427/428FE, except 14 bolt head,medium riser,16 bolt holes in gasket, port size 1.40 x 2.04, thickness .060 390/427/428FE 1966-69 14 bolt cylinder heads, 1966-69 390 GT and 1966-67 428 T-Bird, 10 bolt holes in gasket, port size 1.43 x 2.12, thickness .060 239-35067 239-35063 239-35004 260/289/302/351W thermostat housing neck gasket 390/427/428 after 12/01/66 thermostat housing neck gasket 390/427/428 before 12/01/66 thermostat housing gasket WATER PUMP GASKET 239-13267 239-35211 239-11760 260, Early 289, open back pump later 289, 302, 351W, closed back pump 390/427/428FE, 2 required COMPLETE ENGINE GASKET 239-2804 260/289/302/351W, thickness 3/16, cork-rubber 260/289/302/351W, thickness 5/16, cork-rubber with steel core sales: 203-284-3863 260/289/302/302 SVO/Boss 302, 1962-11/82, 2 piece, premium 351W, 1969-07/10/83, 2 piece, premium 302/ 302 SVO 12/01/82 - 2001, 1 piece, premium 351W/351W SVO 7/10/83 - 1998, 1 piece, premium 289/302 early/302 Boss 2 piece, rubber 351C/351W 2 piece, premium rubber 390/427/428FE 2 piece, premium rubber w/side rails TIMING COVER GASKET VALVE COVER GASKET 239-1613 239-1645 390/428FE Big Block housing REAR MAIN SEAL EXHAUST HEADER GASKET w / perforated steel core anti-stick coating 239-1415 260/289/302, standard cork 351W, standard cork 390/427/428FE, standard cork 260/289/302/Boss 302/302 SVO, thickness 3/32, rubber-coated fiber (Except 351W) 1969-93 351W, thickness 3/32, rubber-coated fiber 390/427/428FE, thickness 3/32, 2 sets required for engines with windage tray, rubber coated fiber OIL FILTER ADAPTER GASKET INTAKE MANIFOLD GASKET 239-1250 260/289/302/351W, standard thickness, standard cork Boss 302, thickness 1/4, cork-rubber with steel core 260/289/302/351W, PermaDry Plus, High Temp w/ compression stops 390/427/428FE, standard thickness, standard cork 390/427/428FE, thickness 3/16, cork-rubber email: sales@cobraautomotive.com 60 260/289/302 1962-11/30/82 w/open or blocked crossover (Inc’l (2) 1011-1, 1250, 1415, 1613, 1809, 2707-1) www.cobraautomotive.com Rev051112 BODY: EXTERIOR 1965-66 R-MODEL APRON This is an exact replica of the original 1965 R-model apron, developed in our own restoration shop for fit and finish, so you know it’s “right on the money”. No more poor fitting parts (that you waited months for). High quality fiberglass made right here in Connecticut with Cobra Automotive’s own distinct black gelcoat finish. We feel the black finish enables body work to be better-performed because of it’s ability to show flaws during final preparation. Fully functional with turn signal holes and brake ducts, just like the originals. Perfect fit when used with factory nose components, and held closely to a weight of just under 8 lbs. Enables you to save weight and provide more fresh air to the radiator. When shipped UPS, additional charge applies for oversized carton. 100-RMA 1965-66 Apron LICENCE PLATE BRACKET FOR 1965-66 R-MODEL APRON This cool item is perfect for meeting the law in states requiring front and rear license plates on street vehicles. Specifically made to compliment the R-model valance (racing apron) which does not have a provision for the stock bracket. The bracket is easy to install to the underside of the lower radiator support. Powder coated Black for long lasting good looks. This piece includes the hardware for the license plate and the seal to the bottom of the valance. 100-LPB 1965-66 Shelby – Mustang w/ R-model valance 1967-68 R-MODEL STYLE APRON This is our own version of a 1965 R-model apron for your 1967-68 Mustang. It took us months of prototype styling to come up with the perfect look. Replaces factory headlight doors, lower valance, bumper and bumper brackets; this apron brings the style and function of the 1965 Shelby GT350 R-model to the 1967-68 cars. Made with parking light holes, functional brake duct scoops and integral headlight buckets that eliminate the awkward lip where the front bumper used to be. Everything blends smoothly with no corners cut to sacrifice styling. Held closely to a weight of approximately 14 lbs, the total weight savings is 24.6 lbs. Designed for hood pins, but can be adapted to retain the stock hood latch. Made to be used with the standard Mustang length hood and finished in black gelcoat. Complete with studs that bolt on using the stock mounting points. When shipped UPS, additional charges apply for oversized carton. 100-RMA67 1967-68 DEBRIS SCREENS Protect that valuable oil cooler and radiator with our tough stainless debris screen. This is a must when running at race speeds on the track (or when tooling down the interstate, for that matter). Loose race rubber and debris on the race track or highway act like projectiles at high speeds and can cause major damage to your radiator. Not just any wire mesh will withstand the punishment of flying debris; this is why we make our screens out of the same tempered .035” stainless 1/4” mesh used in NASCAR. Cut to fit the opening of your early Mustang radiator support, then folded over on the edges to form a hem that will not unravel. Mounts approximately 2” in front of the radiator. Complete with mounting instructions and special rivets. 100-997 Debris screen 1965-66 25” wide x 17” tall 100-997-67 Debris screen 1967-68 28” wide x 18” tall COMPETITION HEADLIGHT COVERS Cobra Automotive’s ABS Plastic Competition Headlight covers are a trick accessory for your race car or will give your streetcar the look of a race car. They are held on by the outer trim ring and don’t even require the use of a headlight (saving even more weight). They fit the 7” round headlights on the 1965 thru 1968 Mustangs and also fit 1970 Mustangs. They are made of lightweight black textured ABS plastic and can be painted if desired (these also look great with a racing decal in the center). With additional trimming, they can easily be held on by Velcro for fast removal when used on the street. 100-998 Headlight covers, (pair) 1965-68 and 1970 sales: 203-284-3863 email: sales@cobraautomotive.com 61 www.cobraautomotive.com Rev051112 BODY: EXTERIOR 65-66 SHELBY GT350 FIBERGLASS HOODS If you want a top-quality Shelby GT350 hood, either for racing or restoration, we have them all. We started with an original Ford steel hood for our “master” from which we made our own molds for the outer shell and inner framework. Our extreme lightweight racing hood is specially hand-laid with “Coremat” reinforcement for superior strength and lightness. For restoration purposes, we have a more practical solution with a faithful reproduction of the original GT350 hood. We also offer a lightweight but mid-priced version of our racing hood for the budget-conscious competitor. Our hoods come finished in black gelcoat, ready for final finish work. Must be shipped truck freight. 100-350GTHS Hood, 1965-66, street, fiberglass, approx. 23 lb 100-350GTHR Hood, 1965-66 lightweight, race, fiberglass, approx. 20 lbs 100-350GTHXR Hood,1965-66 extreme lightweight, race, fiberglass w/Coremat reinforcement, approx. 17 lbs STAINLESS HOOD PIN KITS Hood pins were used on all 1965-’67 Shelby Mustangs. These are the best reproduction kits available, made with stainless steel components just like Shelby used in the 60’s. Accurately made with proper hardware for every last show point. Each kit includes two ½” diameter x 4-3/8” long stainless pins, nuts, plastic coated stainless lanyards and chrome plated lynch pin. The 1967 version features the proper swivel end on the lanyard. Will not deteriorate from exposure to weather, and so strong we use them to hold down our race car hoods at 170 mph. 273-HPK1 1965-66 Shelby GT350 273-HPK4 1967 Shelby GT350-500 PLEXIGLASS COMPETITION WINDOWS We carry a full line of our own Plexiglas front and rear windows for Shelbys and Mustangs. These aircraft quality windows offer large weight savings along with added safety and strength. Accurately thermoformed by the same process used to make NASCAR Cup racing windows. Not just a piece of flat material these windows have all the compound curves of a piece of factory glass for an almost undetectable look. Made slightly oversize for a “Trim to fit” installation. At ¼” thick they use the stock gasket, moldings and clips. These windows have been known to run for many years with just periodic polishing. Save up to 25.5 crucial lbs from the top of the car for a lower center of gravity. Rear R-model windows are an exact reproduction of the originals with the “iconic” dip down 2” opening at the top. This was a Pete Brock innovation claimed to add 5 MPH to a car’s top speed. The R-model rear window installation kit is a reproduction of the original set-up and includes 2 spacer channels, 4 hold down tabs and the front center support bracket all made of aluminum. Plexiglass windows are not DOT approved for street use. 320-S322 Front windshield 1965-68 all body styles, save 8.5 lbs 320-S323 Front windshield 1969-70 fastback only, save 9.5 lbs 320-RW65 Rear window, 1965-68 coupe, save 8.5 lbs 320-FB65-66 Rear window, 1965-66 fastback, save 17 lbs 320-FB67-68 Rear window, 1967-68 fastback, save 14.8 lbs 320-FB69-70 Rear window, 1969-70 fastback, save 12.2 lbs 289-RW2 Rear window, R-model, 1965-66 fastback, save 15 lbs (requires 289RWHP inst. kit) 289-RWHP Installation kit, R-model rear window, 1965-66 fastback 289-RW2 R-MODEL SIDE WINDOW FRAMES For that correct R-model look, we offer these reproductions of the original extruded aluminum side window frames as installed on the original 1965 Shelby GT350 R-model race cars. Fits 1965-66 fastback bodies only, updated to fit better than the originals but will still rattle and whistle. Designed for the vent window to be fixed in place, while the side window can be lowered via a 2” web strap. Some fitting required. Plexiglass side windows are sold separately as 2 vent windows & 2 side windows, 1/8” thick, ready to install. (may need slight trimming) Combined; these side windows and frames weigh about 25 lbs less than the stock components. 288-5500 R-Model side window frames, (pair) 1965-66 Shelby/Mustang fastback, Plexiglass NOT included 100-350SWPG R-Model side windows, set 4, Plexiglass (fits repro frames #288-5500, will not fit original frames) sales: 203-284-3863 email: sales@cobraautomotive.com 62 www.cobraautomotive.com Rev051112 BODY: EXTERIOR R-MODEL QUARTER VENT DELETE PANELS Give your car a competition look and save weight at the same time. Replacing the factory vents with these exact copies of the original R-model quarter vent delete panels will save about 14 lbs from above the belt-line of your car. These super precise aluminum panels are laser-cut and pre-bent for body contour for a superior fit and finish. Supplied in bare aluminum and complete with pop rivets for mounting. Quick and easy installation. See # 288-RINT for interior upper quarter panels for quarter vent delete. 288-VDK R-Model quarter vent delete kit, 1965-66 Shelby / Mustang fastback 1966 SHELBY GT350 SIDE SCOOPS These are an excellent reproduction of the 1966 Shelby GT350 side scoop so popular on these early cars. Will fit 1965 cars as well for a 1966 appearance. Functional fiberglass scoops that pop rivet on like the originals for easy installation. Flanges and ducting not included (ducting is available upon request). 273-SS12 Side scoops, pair, 1965-66 Shelby/Mustang all models R-MODEL COMPETITION TRUNK LATCH KIT Cobra Automotive offers an exact Concours reproduction of the competition trunk latch & gas cap delete used on the original 1965 Shelby GT350 R-Model race cars. Correct in every detail, the kit includes a 1/2” diameter x 4-3/8” long stainless pin and nuts, a plastic coated stainless lanyard with proper swivel end and chrome plated lynch pin. The polished stainless deck lid plate is laser cut and formed to the exact size & shape as the originals, as is the circular aluminum fuel filler cover. Supplied with the correct size rivets, this kit will fit all 1964 thru 1966 Mustang Fastback and Notchback models. This high quality kit is the perfect final detail for your Shelby R-Model clone, vintage race car or street car. 100-RTDK 1965-66 Shelby or Mustang fastback only COMPETITION FRONT TOW HOOK Cobra Automotive’s competition front tow hook is designed for easy access by corner workers to quickly and securely tow your race car out of harms way in the event of a spin out or mechanical issue. Custom made of .120” thick steel with a ½” diameter tow loop that projects forward 6-1/4” from the rear edge of the 2” x 6” mounting plate. An integral “Jack Bung” 2-1/8” tall x 1-3/4” diameter is welded on for quick & safe jacking in the pits. Supplied in bare steel as this is designed to be welded to the underside of the lower radiator support crossmember on 1965 thru 1970 Mustangs and Shelbys. 100-FTH Front tow hook, 1965-70 Shelby/Mustang, weld-on COMPETITION REAR TOW HOOK Cobra Automotive’s Competition Rear Tow Hook is engineered for a custom fit, easy access and strength for quickly towing your race car to safety in the event of a spin out or mechanical issue. Comprised of two aluminum plates .1875” thick x 2-1/2” x 5-1/2” that sandwich the steel rear taillight panel and bolt thru the stock bumper mounting holes into the steel tow loop. There is no cutting, drilling or welding required. The aluminum plates are supplied bare to be painted to match the car if desired and the tow loop is powder coated gloss Red. Designed specifically to bolt-on to 1965 and 1966 Mustangs and Shelbys with supplied grade 8 bolts. 100-RTH Rear tow hook, 1965-66 Shelby/Mustang, bolt-on sales: 203-284-3863 email: sales@cobraautomotive.com 63 www.cobraautomotive.com Rev051112 BODY: EXTERIOR AMERICAN RACING TORQ THRUST “D” R-MODEL WHEELS These popular American Racing Torq Thrust D wheels are the same wheels used in the 60’s on the original Shelby GT350 R-Models. Made with today’s casting technology and more reliable high strength aluminum, these wheels are the standard of the vintage racing industry. Everyone one of our race cars gets fitted with these wheels as they are the best value for the dollar. Available in multiple sizes, we have selected the three most popular ones for you to choose from. Requires the use of tapered seat lug nuts. Comes with a gray painted center and machine finished outer rim in 5 hole on 4-1/2” Ford pattern. We also offer a competition prepared version in 7” and 8-1/2” widths that have our own steel lug nut seat inserts installed. This prevents wear & tear on the aluminum seats from repeated removal & installation of lug nuts during competition use. 292-RM6 Wheel, 15x6” R-Model, Torq Thrust D, .175” pos. offset 292-RM7 Wheel, 15x7” R-Model, Torq Thrust D, .200” neg. offset 292-RM8 Wheel, 15x8.5” R-Model, Torq Thrust D, .950” neg. offset 292-RM7-INSERT Wheel, 15x7” w/steel lug nut seats, R-Model, Torq Thrust D 292-RM8-INSERT Wheel, 15x8.5” w/steel lug nut seats, R-Model, Torq Thrust D NOTE: Cobra wheels available on request, reproduction, magnesium fronts and rears AMERICAN RACING TORQ THRUST “D” CHROME WHEELS American Racing also offers Torq Thrust D wheels in a Chrome finish for that show look. Made with the same high strength aluminum and available in two popular sizes in a 5 hole on 4-1/2” Ford pattern. Requires the use of tapered seat lug nuts. 292-CHRM7 Wheel, 15x7” Torq Thrust D, Chrome, .250” neg. offset 292-CHRM8 Wheel, 15x8.5” Torq Thrust D, Chrome, .950” neg. offset GOODYEAR AND HOOSIER RACE TIRES Here is a selection of race tires that we have found to perform very well on vintage road race Shelbys, Mustangs, Camaros & Corvettes. Choosing tire brand and compound is a matter of driver preference, car set-up and track surface, both Hoosiers and Goodyears are excellent tires. The Hoosier Street TD is a less expensive race tire with a DOT label for marking and performance only and is available in three sizes for 15” wheels. Hoosier also makes an “S” version with a stiffer construction that is favored by some of our Cobra racers. We find that, on our Shelbys, the Goodyear “Blue Streak” racing tires exhibit better traction and maintain that traction longest. The Goodyears have the classic G-7 pattern and are also available in three sizes for 15” wheels allowing for matching front & rear sets in R655 and firm compounds. Racing tires are NOT INTENDED FOR HIGHWAY USE. 225-60-15 Tire, Hoosier, Racing, 225-60-15, Street TD, bias ply, 25.8” dia. 245-60-15 Tire, Hoosier, Racing, 245-60-15, Street TD, bias ply, 26.4” dia. 275-60-15 Tire, Hoosier, Racing, 275-60-15, Street TD, bias ply, 27.6” dia. 25.5X8.5X15 Tire, Hoosier, Racing, 25.5x8.5-15, TD-S, stiff construction, 25.5” dia. 26.5X9.5X15 Tire, Hoosier, Racing, 26.5x9.5-15, TD-S, stiff construction, 26.5” dia. GY-1724 Tire, Goodyear, Racing, 6.00-15, R655 compound, bias ply, 25.5” dia. GY-1725 Tire, Goodyear, Racing, 6.00-15, firm compound, bias ply, 25.5” dia. GY-1756 Tire, Goodyear, Racing, 7.00-15, R655 compound, bias ply, 26.8” dia. GY-1757 Tire, Goodyear, Racing, 7.00-15, firm compound, bias ply, 26.8” dia. GY-1758 Tire, Goodyear, Racing, 8.00-15, R655 compound, bias ply, 26.8” dia. GY-1759 Tire, Goodyear, Racing, 8.00-15, firm compound, bias ply, 26.8” dia. SIDE VIEW MIRRORS These mirrors were offered on the early street and competition Shelby Mustangs. The Raydot mirror is a light weight spun aluminum racing mirror that was used on competition Cobras and the Shelby R-models. The Rotunda mirror is an exact repro of the original Ford chrome door mirror used on the 1965-66 Shelby GT350 street cars. The Talbot mirror was the most commonly used mirror on 1965-66 Shelby Mustangs. All three mirrors are high quality reissues of the originals. 273-MIR12 Mirror, Raydot Race type, 3-1/2” flat lens 273-MIR14 Mirror, Rotunda Repro, 3-1/4” lens, Chrome 273-MIR16 Mirror, Talbot mirror for 1965-66 Shelby Mustangs 273-MIR12 273-MIR14 273-MIR16 1967 SHELBY TAILLIGHT BOX HOUSINGS These are reproductions of the steel taillight box housings as originally used on the 1967 Shelbys. Sold in pairs, left and right hand, they are laser cut and stamped steel with 3 large holes in each. The taillight bodies bolt through these and they also support the taillight panel. This is the shallow version that was used with the later, raised lip, taillight panel. 100-TLB67S Taillight box housings, pair (L&R) 1967 Shelby sales: 203-284-3863 email: sales@cobraautomotive.com 64 www.cobraautomotive.com Rev051112 BODY: EXTERIOR FUEL SAFE FUEL CELLS A fuel cell is a very important part of safety on the race track and is required by all racing organizations. Fuel Safe is one of the leading manufacturers of fuel cells in the country. Available from Fuel Safe is this drop in early model Mustang fuel cell with a fully TIG welded aluminum container. It mounts directly in the trunk of your Mustang with no modifications or special brackets needed. It even has a tapered shape to it just like the factory tank so it is not noticeable from the rear of the car. This is a nice feature for discrete street use. Available in two versions, Pro bladder is the most durable and is for use with all hydrocarbon fuels, e.g. gasoline as well as E10 & E85. Sportsman bladder for use with all hydrocarbon fuels only. Both fuel cells come with full foam baffling, aircraft nut ring, gaskets, top plate pick-up assembly and 3” standard (in trunk) fill plate with rollover check valve. Approved by for use by all major race organizations and all race sanctioning bodies, cells are FIA-FT3 certified, manufacturers warranty is 2 years. Options include road race surge tank, dip stick or fuel level gauge sending unit and street filler neck for use with stock gas cap. Also stock location bottom front fuel line pickup may be specified. Replacement bladders are also available. 245-SA111B Pro cell, 1965-70 Shelby/Mustang, top fill, -8 top pick-up, no dipstick, no surge tank, no sending unit 245-SA112B Sportsman cell, 1965-70 Shelby/Mustang, top fill, -8 top pick-up, no dipstick, no surge tank, no sending unit 245-ST100-8 Surge tank, installed, road race, -8 pick-up 245-FL08 Dip stick, fuel cell, 24”, -8 fitting 245-SUP12-0-90-OHM Fuel level sending unit 12”, programmable for Fuel Safe gauge 0-90 OHM 245-SUP12-76-6-OHM Fuel level sending unit 12”, programmable for stock Ford gauge 76-6 OHM 245-RFK6566 Filler kit, 1965-66 for stock gas cap, specify # of gal. tank 245-RFK6768 Filler kit, 1967-68 for stock gas cap, specify # of gal. tank 245-RFK69 Filler kit, 1969 for stock gas cap, specify # of gal. tank 245-RFK70 Filler kit, 1970 for stock gas cap, specify # of gal. tank sales: 203-284-3863 email: sales@cobraautomotive.com 65 www.cobraautomotive.com Rev051112 BODY: INTERIOR WOOD STEERING WHEEL KITS These steering wheels are hand crafted by Moto-Lita in England who were the original manufacturer for Shelby American in the 60’s. Measuring 15” in diam. for a positive feel and driving comfort. Billet aluminum steering wheel hubs are CNC machined for a precise fit while retaining an authentic look. One of these beautiful period correct wheels would compliment any Cobra, Shelby or Mustang. Kit comes with Mahogany wheel, center cap, hub and mounting screws. 291-101M Steering Wheel Kit, 15” Mahogany wheel w/hub, screws & cap 291-15DOE-W Steering Wheel, 15”, Mahogany Rim, 6 Bolt, Polished (Instructions included LEATHER STEERING WHEEL KITS Same as 15” wheel but hard rubber coated with Black leather wrap. These wheels are customarily used for competition where filling the hand with a firm grip is important. 291-100 Complete kit 291-101 Wheel only COBRA 16” WOOD STEERING WHEEL KIT Now you can get a perfect copy of the famous 16” diam. wheel. This wheel came standard on AC Cobra’s and the first batch of 1965 GT350 Shelby’s. Larger in dia. for more leverage along with the unique look of laminated plywood. A classic English wheel with that true sports car look. 291-100C Steering Wheel & Ring, 16” AC Cobra, Mahogany Rim, 6 Bolt, Polished 291-SPLIT16 Steering Wheel, 16” AC Cobra, Mahogany Rim, 6 Bolt, Polished OEM-RING Center Ring only for 16” split Cobra wheel QUICK RELEASE HUB 100-QRH Quick Release Hub This is our own quick-release steering wheel hub designed to fit any 196570 Mustang. It is made to adapt to any of the 6 bolt pattern Moto-Lita 15” steering wheels without any modification to your existing Mustang steering column. Spring loaded billet aluminum hub works in conjunction with hardened steel splined adapter for safe positive fit. Makes getting in and out of your car a snap. A must for competition use. 100-QRH Quick release hub ALUMINUM STEERING WHEEL HUB Designed for use in your early Mustang as an exact copy of the 1965 GT350 hub. Meant to be used with original style Cobra steering wheel. CNC machined from billet aluminum and hand broached for a perfect fit. Can be polished for that same chromed appearance the originals had. S1MS3511R 1965-68 aluminum steering wheel hub S1MS3511r COMPETITION COLLAPSIBLE STEERING COLUMN Fully adjustable, billet aluminum construction, professional quality as used in NASCAR. 1965-’66 Mustang/Shelby (must specify column “drop” 7”, 8” or 9” 100-Collapsible Column Woodward sales: 203-284-3863 email: sales@cobraautomotive.com 66 www.cobraautomotive.com Rev051112 BODY: INTERIOR R-MODEL DASH KITS This dash kit will give you that authentic R-model look. Great for race cars or a competition street car. Eliminates unreliable stock gauge cluster by replacing it with more precise instrumentation. Can be supplied with your choice of exact replica R-model gauges or period looking Stewart Warner gauges for all out competition. Comes complete with period correct indicator lights. 273-GP1 Original size Stewart Warner Gauges 273-RGS1 Replica Shelby R-model Gauges 100-LIGHTS Set of 3 indicator lights only R-MODEL DASH PANEL ONLY This is the same panel we use in our R-model dash kit but with out gauges. Precision bent steel, black wrinkle finish. 273-RGP1 R-Model dash panel only RACING DASH PANEL Here is another version of the R-model gauge panel except it is designed to use four gauges only. The four gauge panel allows you to use larger more visible competition gauges without the extra expense of unnecessary speedometer and tachometer. With this gauge panel a larger more purpose built tachometer is mounted to the steering column for better visibility. Accepts larger 2-5/8” gauges. Comes in Black wrinkle finished. 100-191 Racing dash panel STEWART-WARNER GAUGES These Stewart Warner black faced gauges are a great period correct option to reproduction R-model gauges. Increased reliability and accuracy make these gauges our first choice when building an R-model clone or race car. Smaller gauges are standard 2 1/16” size and larger gauges are 3-3/8” for perfect fit. STW-550BPD 160 MPH Speedometer 3-3/8” STW-82170 8000 RPM Tachometer 3-3/8” STW-82333 0-16 psi Fuel Pressure gauge 2-1/16” STW-82504F Fuel Pressure sender, electric STW-82327-72 140-325 Degree mechanical oil temp gauge 2-1/16” STW-82326-72 100-265 Degree water temp gauge 2-1/16” STW-82322 5-80 psi mechanical Oil pressure gauge 2-1/16” AUTOMETER RACING GAUGES For the more modern race car look. Known for their accuracy and reliability these Autometer gauges fit the bill. The four primary gauges come in the larger 2-5/8” for better visibility and the 9000 rpm tach usually mounts on the steering column for ease of access. Associated pressure and warning light switches available for that extra safety margin of error. All gauges fit nicely into our four gauge panel. ATM-3411 0-15 psi. Fuel Pressure gauge ATM-3421 0-100 psi. Oil Pressure gauge ATM-3431 140-280 Degree water temp gauge ATM-3441 140-280 Degree oil temp gauge ATM-6809 9000 rpm Tachometer with recall ATM-3240 Oil Pressure warning light ATM-3242 30 psi Pressure switch RADIO DELETE PLATE All factory built race cars had a competition heater delete kit and this radio delete was one of the key components. The purpose was to reduce weight and give the interior a sanitary competition look. This is an exact replica which nicely fills the factory radio hole and is virtually undetectable from an original except there is no FoMoCo or part number on the back. The originals were used in the 1965 Shelby R-Model race cars and the AFX Mustang drag race cars. Precision molded exclusively for Cobra Automotive in Black ABS plastic with solid posts threaded 3/8-24 and supplied with the proper “Pal” nuts. This piece will add an authentic finishing touch to your ’65 – ’66 Mustang race car or streetcar. 100-RDK1 Radio delete plate sales: 203-284-3863 email: sales@cobraautomotive.com 67 www.cobraautomotive.com Rev051112 BODY: INTERIOR HEATER DELETE BLOCK OFF PLATES Here are the other 2 major components that make up a competition heater delete kit. One plate is stamped aluminum and covers the hole where the heater box motor protruded through the firewall. The other plate is plastic just like the originals for covering the hole where the heater controls would be. These plates will complete your heater delete kit with a nice finishing touch. 100-HCD1 Heater control delete plate 100-HFD1 Heater firewall delete plate REAR VIEW RACING MIRRORS This mirror is a nice size to replace your stock unit. It is slightly oversize with a mild curve for a wider panoramic view. This is what we prefer in our own race cars because of it’s ease of installation and superior visibility. Mounts in a snap with clips that go over existing mirror. 34000 12” Race mirror R-MODEL COMPETITION DOOR PANELS These R-model competition door panels are exact copies of the originals. With all door handle access and mounting holes drilled, these snap in door panels are an easy installation. Sold as a pair they come complete with all the hardware ready to install. Made of lightweight aluminum these door panels can be painted to match any interior color. 273-DP1 Fits 1965-66 complete with mounting snaps COMPETITION UNIVERSAL WINDOW NET AND INSTALL KIT 317-80120-10 317-80122-22 Window net rectangular 25” W X 20”H Window net install kit, top & bottom bars (seat belt release type ) COMPETITION SHIFT BOOT This competition shift boot and frame is engineered with the racer in mind. The light weight aluminum frame has a 4” x 6” opening and can be riveted or screwed to the transmission tunnel. The black fire retardant boot has a heat reflective and oil resistant liner and can be easily removed by unsnapping it from the frame. This feature allows easy access to the handle and linkage bolts for adjustments or repairs. Details like this can make your race car that much more “user friendly” both at the track and in the shop. 16500 Competition shift boot SHIFT BOOTS These are factory style replacement shift boots that give you that original look. A direct bolt in for your old ripped boot. These boots help keep road noise and dust from the interior on the street or track. Frequent shift boot replacement is needed on most race cars due to aggressive shifting. C5ZZ7277BR 1965-68 Boot 273-SLB4 Cobra boot C5ZZ7277BR 273-SLB4 C5ZZ7262C 273-SBR4 CHROME BEZEL Replacement chrome bezel that fits around the shift boot. An easy to replace part that brings new life to your interior. Exact copy of originals. C5ZZ7262C 1965-68 4 speed Mustang 273-SBR4 Cobra bezel sales: 203-284-3863 email: sales@cobraautomotive.com 68 www.cobraautomotive.com Rev051112 BODY: INTERIOR RACING SEATS 47 Series 53 Series with Head and Shoulder Units A driver has to feel comfortable and safe in order to perform up to his maximum capabilities. We prefer Kirkey seats because of their strong lightweight design and the way they comfortably secure the driver. This top of the line NASCAR style road race seat is primarily the only seat we suggest using for versatility of sizes and safety reasons. Constructed of double wall aluminum. This seat will give the driver the confidence needed to turn those fast lap times. Comes in 1” size increments. Please talk to one of our sale staff to specify size needed for your application. 290-47500 Seat, Kirkey 47 Series - Intermediate Road Race (must specify size) 290-47341 Seat Cover 47 Series - Intermediate Road Race, Black (must specify size) 290-53300 Seat, Kirkey 53 Series - Full Containment Layback (must specify size) 290-53541 Seat Cover 53 Series - Full Containment Layback, Black Air Knit (must specify size) VINTAGE R-MODEL SEATS Modern aluminum construction with that period correct look and providing a look used in many 1960’s race cars including Cobras, R-models and Trans-Am cars. 290-41300V Seat, Kirkey Vintage racing R-model style (must specify size) 290-41301V Seat Cover, Vintage R model racing seat (must specify size) FIVE POINT RACING SAFETY BELTS An approved harness restraint system is required by all race organizations for safety purposes. Rules state that seat belts and window nets must be replaced every 5 years. The 5 point seat belt systems we sell are SFI-16.1 approved with 3” webbing. A variety of mounting and latching mechanism systems are available. We are familiar with seat belt regulations and can order the proper system for your needs. Specify Color and cam lock or latch type release. 317-29073 5 point harness 317-2900 Sternum strap 317-94599 Eye bolt kit for seat belts R-MODEL INTERIOR UPPER QUARTER PANELS R-Model interior upper quarter panels, pair L&R, for quarter vent delete, 1965-66 Shelby/ Mustang fastback, fiberglass repro. 288-RINT R-Model interior upper quarter panels 1965 R-MODEL PACKAGE TRAY This is an exact replica of the original 1965 R-model package tray. This replaces the rear seat & trap door to the trunk on a 1965 or 66 Mustang fastback. The tray has a recess that allows the spare tire to be mounted inside the car. Some form of fabricated support is required if a spare is to be mounted on the tray. Made from a mold taken from an original part, this has the exact texture on the inside surface and on the back side where it is visible inside the trunk. The quality and availability are excellent as these are made exclusively for Cobra Automotive by the same supplier that makes our R-Model front aprons. Finished in black gelcoat with the shock access and tire hold down holes pre-cut these are ready to install in a Shelby restoration, vintage racer or Shelby clone project. We also offer a special light weight race version that weighs in at approximately 9 lbs. 100-PT65S Package tray, ‘65 Shelby repro, standard weight, approx 20 lbs 100-PT65S-LTWT Package tray, ‘65 Shelby repro, light weight, approx 9 lbs sales: 203-284-3863 email: sales@cobraautomotive.com 69 www.cobraautomotive.com Rev051112 ACCESSORIES Rear Axle Travel Limiting Cable Kit 1965 Shelby These were used on all original 1965-66 Shelby GT350’s that had override traction bars to keep the rear suspension from over extending. 100-65CABLES Rear Axle Travel Limiting Cable Kit 1965 Shelby Mustang Tie Down Kits This is one of our favorite products. This neat kit bolts directly up to your Mustang suspension so that the car can be tied down for towing purposes. Heavy steel construction with durable powder coating finish make this tie down kit a long term value. Universal fitting rear end eyelets clamp around the axle housing and can be positioned in multiple places. Compact front end eyelets securely fasten through factory holes in lower control arm for ease of access. No cutting, welding or holes needed to be drilled for installation. Tie down hooks snap into place allowing proper towing angle of straps. 100-999 Tie-Down Kit, 1965-66 Mustang, front & rear (will not fit 8” axles) (Instructions included) 100-999A Tie-Down Kit, 1967-70 Mustang, front & rear (will not fit 8” axles) (Instructions included) 100-bat-tray Battery Tray Heavy duty aluminum construction, these are made specifically for these batteries in a competition environment. 100-BAT-TRAY Battery Tray, fits # BAT-ETX30L Dry Cell race battery 6.625 L x 5.1875 W x 6.875 H. Battery NOT included. Battery Tray for Group 24 batteries Cobra Automotive’s exclusive Battery Tray, is designed to mount a Group 24 size battery in the passenger side of a 1965 thru 1973 Mustang trunk but can also be adapted to a variety of applications. This tray measures 12.75” long x 7.5” wide x 8.5” high and weighs just under 2.5 lbs. Features a side bracket and a hold down that can be mounted two ways to accommodate different style battery tops. Fabricated from laser cut, CNC formed .090” thick aluminum and finished in Silver powder coat for long lasting attractive appearance. Battery NOT included. 100-BAT-TRAY-24 Battery Tray, fits group 24 battery, 11” L x 6.875” W x 8.75” H (No holes, Silver powder coat .090 Aluminum w/2 rivets in corner) Cobra Battery Caps A Cobra Automotive Exclusive. These are a perfect reproduction of the original battery caps for the trunk mounted battery in a 1965 Shelby GT350’s. Made to work with newer Autolite reproduction batteries. Originals are rare and can fetch as much as 1500.00 for a set. This is the ultimate Concours touch for your early Shelby Mustang. Comes complete with vent tubes. Sold as a set. 100-BATCAP-M Battery Caps, 1965 Shelby “COBRA” battery caps set, for modern battery - both nipples toward center of battery 100-BATCAP-O Battery Caps, 1965 Shelby “COBRA” battery caps set, for original battery - both nipples forward 100-bat-tray-24 Battery Box Battery Box with hold down and hardware, NHRA Approved, Fits group 24 battery, 13.5” L x 9.5” W x 10” H 293-48100 Battery Box sales: 203-284-3863 email: sales@cobraautomotive.com 70 www.cobraautomotive.com Rev051112 ACCESSORIES Batteries A leader in the latest battery technology, East Penn, makers of Deka brand batteries, has designed an (AGM) absorbed glass mat battery that reduces size and weight. Completely spill proof and leak proof; frequent replacement and high maintenance are over. BAT-9A34 Battery, “Deka” Dry Cell, Intimidator Non-Spillable Race battery, 785 cold cranking amps, Grp 34, 10.75 L x 6.875 W x 8 H BAT-ETX30L Battery, “Deka” Dry Cell, Non-Spillable Race battery, 365 cold cranking amps, 21.7 lbs, 6.625 L x 5.1875 W x 6.875 H Spa Technique Fire Suppression Systems The fire suppression systems have been rigorously tested in conjunction with the BSI and MSA and fully conform to the latest FIA regulations for competition vehicles. They are FIA approved steel bottle MFM 400 S suppression systems that now offer the competitor a cost effective alternative while still giving all the performance of our more expensive alloy and carbon fiber fire extinguishers. Utilizing SPA “Lite” AFFF (Aqueous Film Forming Foam) these non-toxic ozone friendly suppression systems give the competitor the same level of protection whether driving Formula 1, WRC or Clubmans Saloon. MFM400-A Fire Suppression System, Aluminum bottle, 4 Liter pull actuated w/6 nozzles MFM400-S Fire Suppression System, Steel bottle, 4 Liter pull actuated w/6 nozzles MASTER Power Kill Switch Another item required by most all racing organizations. This switch allows the main power supply to be cut off in case of an emergency. Heavy-duty metal construction instead of plastic like some other brands, these switches are handy for anti-theft and long term storage as well. Usually externally mounted or within reach of the driver and safety crew. M-284 Kill Switch, Battery w/face plate, 2 post type, 15/16” panel thickness Export Brace These were originally installed on all Mustangs that were exported out of the country. Due to possible rough travel during shipping overseas and on European roads these braces were installed to reduce chassis flex. This is a Concours reproduction with correctly spaced mounting holes of the original export brace used on Shelby Mustangs. Stamped from heavy-gauge steel one of these braces will compliment your cars handling and greatly reduce chassis flex. You will not find a more faithfully reproduced part. C5ZZ-16A052-E Export brace, 1965-70 Mustang with un-evenly spaced cowl holes, Concours reproduction Monte Carlo Bars The Monte Carlo bar was first developed for use on the Monte Carlo Falcons that were sent to Europe to compete. Shelby added these to the GT350 Mustang for extra chassis stiffness in 1965-1966. Now an automatic must have part for every hot Mustang on the street and race track. A simple bolt in installation makes this bar one of cheapest and easiest handling improvements you can make. C5ZZ-16A052-ARB 1964-66 Straight Monte Carlo Bar, Black C5ZZ-16A052-BRB 1965-66 Monte Carlo Bar, Curved, Black, for aftermarket distributor clearance Radiator Overflow Tank Light weight plastic design holds full quart capacity. Vented tank includes hose fitting and drain cock. Dimensions 10-1/2” high (overall) 3 “ tank diam. MOR63657 Catch Can, Radiator Overflow Breather Tank sales: 203-284-3863 email: sales@cobraautomotive.com 71 www.cobraautomotive.com Rev051112 ACCESSORIES Dry Sump Breather Tank Use as remote breather/oil separator on engine crankcase, rear differential, transmissions and dry sump tanks. Designed to be panel-mounted and comes complete with filtered breather and drain pet cock. 3/8” NPT inlet, 3-1/8 dia, 6-1/2 “ tank without filter. MOR85470 Catch Can, Rear End Breather-Aluminum Halogen Headlights These high powered Halogen headlights will provide the extra lighting needed for today’s high speed driving conditions. Offered as a direct replacement for 7” diameter headlight applications, these lights will allow you to retain a stock appearance with the benefit of a quartz beam. Bulbs are replaceable without the need of an entirely new unit. Different wattage bulbs can be purchased separately. Headlights sold individually. NEO-910C Complete headlight assembly, Each, 7” Halogen 60 watt high & 55 watt low w/replaceable bulbs NEO-H4 Headlight bulb, halogen Cobra Steering Wheel Center Caps Same as in our steering wheel kits. Replacements for original caps. 273-SWC1A Red, silver, and blue COBRA logo center cap 273-SWC2A Shelby Black and Silver GT350 center cap Tie Down Straps Used for holding down your vehicle during transportation. 317-80810-14 Tie-Down straps, 1”, Black, utility, 16’ long 317-83350-33B Tie Down Straps, 2”, snap Hooks, Black, 6’ long 317-83350-33R Tie Down Straps, 2”, snap Hooks, Red, 6’ long 317-83350-45S Tie Down Straps, Combo Ratchet/Axle, 2”, Snap hooks, Black, 6’ long 1/4 Scale Cobra Valve Cover Paper Weight This is a neat little trinket for your desk or showcase. Cast out of solid aluminum this little 1⁄4 scale valve cover has some heft to it. Every attention has been paid to the detail to make this item a great conversation piece. It measures 5 3⁄4” long and sports highlighted fins just like its big brother. A must have for Ford enthusiasts. 100-PW Paper Weight, Cobra valve cover 1/4 scale Pen Not Included DVD Movie Cobra Automotive latest “in car” camera DVD, approximate 60 min. Mid Ohio, Road America, Watkins Glen, Sebring, etc. 100-DVD2 each sales: 203-284-3863 email: sales@cobraautomotive.com 72 www.cobraautomotive.com Rev051112 ACCESSORIES Cobra Automotive Decals Bring your car up to speed with our own racing decals. 100-556-B Decal, “Equipped by Cobra Automotive”, each, Blue, 2” X 4-1/2” 100-556-W Decal, “Equipped by Cobra Automotive”, each, White, 2” X 4-1/2” 100-557-B Decal, Quarter panel decals, pair, blue 7” x 16” 100-557-W Decal, Quarter panel decals, pair, white 7” x 16” 100-558 Decal, Windshield decal “CobraAutomotive.com” 4” X 44” white 100-557-B Side Stripes Side stripes give your car that correct factory look. Finish off your restoration with the correct stripe kit. Made of the highest quality material from the original manufacturer for a proper installation. 273-SK2 1965 “GT350” LOGO ONLY (pair) Blue (STRIPES MUST BE PAINTED AS PER ORIGINAL CARS) 273-SK3 Stripe Kit, side, 1966 & 68 GT350, Blue 273-SK4 Stripe Kit, side, 1966 & 68 GT350, White 273-SK5 Stripe Kit, side, 1966 GT350H, Metallic Gold 273-SK3B Stripe Kit, side, 1967 GT350, Blue 273-SK4B Stripe Kit, side, 1967 GT350, White 273-SK7B Stripe Kit, side, 1967 GT500, Blue 273-SK8B Stripe Kit, side, 1967 GT500, White 273-SK6A Stripe Kit, side, 1967 & 68 GT350, Black 273-SK6B Stripe Kit, side, 1967 & 68 GT500, Black 273-SK7 Stripe Kit, side, 1968 GT500, Blue 273-SK8 Stripe Kit, side, 1968 GT500, White 273-SK9 Stripe Kit, side, 1968 GT500 KR, Blue 273-SK10 Stripe Kit, side, 1968 GT500 KR, White 273-SK6C Stripe Kit, side, 1968 GT500 KR, Black 273-SK11C Stripe Kit, side, 1969 & 70 GT350/GT500 Convertible, White 273-SK11F Stripe Kit, side, 1969 & 70 GT350/GT500 Fastback, White 273-SK12C Stripe Kit, side, 1969 & 70 GT350/GT500 Convertible, Blue 273-SK12F Stripe Kit, side, 1969 & 70 GT350/GT500 Fastback, Blue 273-SK13C Stripe Kit, side, 1969 & 70 GT350/GT500 Convertible, Black 273-SK13F Stripe Kit, side, 1969 & 70 GT350/GT500 Fastback, Black 273-SK14C Stripe Kit, side, 1969 & 70 GT350/GT500 Convertible, Gold 273-SK14F Stripe Kit, side, 1969 & 70 GT350/GT500 Fastback, Gold 273-SK45 Stripe Kit, side, rear, fender-hood, 1970 Boss 302, Reflective Black Vintage Racing Decals Beautiful reproductions of the same decals used on race cars in the 1960’s. These were some of the major company’s that were involved in racing back then. Give your car that vintage race look. STK-427BIRD Sticker, Ford 427 Thunderbird valve cover, black & gold STK-AUTOLITE Sticker, Autolite, 5” diam. STK-CASTROL Sticker, Castrol, 5” diam. STK-DAYTONA Sticker, Daytona, 8” wide STK-ESSO Sticker, Esso, 6.25” wide STK-EXTINGUISHER Sticker, “E” Extinguisher STK-FERODO Sticker, Ferodo, 4.5” wide STK-GOODYEAR Sticker, Goodyear, 10” wide STK-KONI Sticker, Koni, 5.25” wide STK-KONI-WING-D Decal, Koni “Wing” STK-PURE Sticker, Pure, 5” diam. STK-SHELBY-RACE Sticker, “Shelby Race Prepared”, Shelby Team 2” X 8.75” STK-SWITCH Sticker, Master Switch Cut Off STK-TERLINGUA Sticker, Terlingua Racing Team, 5” tall STK-TOW POINT Sticker, Tow Point STK-VHT Sticker, VHT, 4.5” tall Holman Moody Decals STK-H/MCOMPGOLD STK-H/MCOMPWHITE Decal, Holman Moody Competition Proven Gold bird 5” X 1.5” Decal, Holman Moody Competition Proven white bird, Window Sticker, 5” X 1.5” STK-HOLMAN Decal, Holman & Moody, Round, 6” dia PATCH-H/MTEAM Holman Moody Team Patch sales: 203-284-3863 email: sales@cobraautomotive.com 73 www.cobraautomotive.com Rev051112 ACCESSORIES Joe Gibbs Racing Products We carry the full line of Joe Gibbs Racing products. JGP-AL Assembly Lube,1 lb Tub, Joe Gibbs Racing JGP-BR Break-In oil, 15W-50, Quart, Joe Gibbs Racing MicroZol BR JGP-BR30 Break-In oil, 5W-30, Quart, Joe Gibbs Racing MicroZol BR JGP-GEAR OIL Gear Lube, Joe Gibbs Racing, 75w110 Synthetic, Qt bottle, Rear end JGP-XP0 Race Oil, Quart, 0W-5, Joe Gibbs Racing MicroZol XP0 (Full Synthetic) JGP-XP1 Race Oil, Quart, 5W-20, Joe Gibbs Racing MicroZol XP1 (Full Synthetic) JGP-XP2 Race Oil, Quart, 0W-20, Joe Gibbs Racing MicroZol XP2 (Full Synthetic) JGP-XP3 Race Oil, Quart, 10W-30, Joe Gibbs Racing MicroZol XP3 (Full Synthetic) JGP-XP4 Race/Flat Tappet Oil, Quart, 15W-50, Joe Gibbs Racing MicroZol XP4 (Petroleum) JGP-XP5 Race Oil, Quart, 20W-50, Joe Gibbs Racing MicroZol XP5 (Semi Synthetic) JGP-XP6 Race Oil, Quart, 15W-50, Joe Gibbs Racing MicroZol XP6 (Full Synthetic) JGP-XP7 Race Oil, Quart, 10W-40, Joe Gibbs Racing MicroZol XP7 (Semi Synthetic) JGP-HR10W30 Street/Flat Tappet Oil, Quart, 10W-30 Joe Gibbs Hot Rod HR 10W-30 (Full Synthetic) JGP-HR15W50 Street/Flat Tappet Oil, Quart, 15W-50 Joe Gibbs Hot Rod HR 15W-50 (Full Synthetic) JGP-HR10W30CONV Street/Flat Tappet Oil, Quart, 10W-30 Joe Gibbs Hot Rod HR 10W-30 (CONVENTIONAL) JGP-HR15W50CONV Street/Flat Tappet Oil, Quart, 15W-50 Joe Gibbs Hot Rod HR 15W-50 (CONVENTIONAL) JGP-TRANSMISSION FLUID Manual transmission fluid, Joe Gibbs Racing, Qt bottle (Full Synthetic) Mobil 1 Synthetic Gear Lube 75W-90 Gear Lube, Mobil 1 LS Synthetic 75w90, Qt bottle, for use in Jerico transmissions Friction Modifier Specially formulated additive to provide smooth operation of clutch-type limited slip differentials. M19546A Friction modifier, additive for Ford Trac-Lock Posi rear ends, 4 oz. bottle Coolant Additives Cooling system additives designed to improve the efficiency of any water cooled engine. MOTORMAX Motor Max, coolant additive, ea, Qt bottle WW12Z Water Wetter, coolant additive, ea, 12 fl oz bottle sales: 203-284-3863 email: sales@cobraautomotive.com 74 www.cobraautomotive.com Rev051112 ACCESSORIES Spray Paint 100-PAINT-KONI Paint, Spray Paint, Koni Shock (12 oz can). Matches the original burnt orange tone of the 1960’s Koni Shocks. (UPS GROUND ONLY NO INTERNATIONAL) Molecule - Care Products for Nomex® Racing Suits MLPR-16 Molecule Protector, 16 oz, Bonds to Nomex® fabric to help repel flammable stains. Maintains breathability. Helps keep colors vibrant by shielding UV rays. Molecule Refresh 16 oz, Keeps suits and helmets fresh over long racing weekends and between washings. Contains an anti-microbial agent to inhibit the growth of bacterial odors. Molecule Spot Cleaner 16 oz, Penetrates deeply into Nomex® fabric to dissolve and suspend tough spots and stains that can create combustible hot spots. Molecule Wash 16 oz, Effectively cleans Nomex® fabric in standard washing machines. Removes contaminants that can degrade fabric performance. Antimicrobial agent inhibits the growth of bacterial odors. MLRE-16 MLSP-16 MLWA-16 sales: 203-284-3863 email: sales@cobraautomotive.com 75 www.cobraautomotive.com Rev051112 APPAREL The original Cobra Automotive T-Shirt with our Snake logo and “Drive hard or stay home” copy, silk screened on 100% Pre-shrunk cotton “Hanes Beefy-T” shirts. A time tested favorite with just a touch of attitude. Cobra Automotive “Drive Hard or Stay Home” T-Shirt 101-TS1M-BLACK 101-TS1L-BLACK 101-TS1XL-BLACK 101-TS1XXL-BLACK T-shirt Black, Cobra Snake Logo, Medium T-shirt Black, Cobra Snake Logo, Large T-shirt Black, Cobra Snake Logo, X-Large T-shirt Black, Cobra Snake Logo, XX-Large 101-TS1M-GREEN 101-TS1L-GREEN 101-TS1XL-GREEN 101-TS1XXL-GREEN T-shirt Green, Cobra Snake Logo, Medium T-shirt Green, Cobra Snake Logo, Large T-shirt Green, Cobra Snake Logo, X-Large T-shirt Green, Cobra Snake Logo, XX-Large 101-TS1M-BLUE 101-TS1L-BLUE 101-TS1XL-BLUE 101-TS1XXL-BLUE T-shirt Blue, Cobra Snake Logo, Medium T-shirt Blue, Cobra Snake Logo, Large T-shirt Blue, Cobra Snake Logo, X-Large T-shirt Blue, Cobra Snake Logo, XX-Large 101-TS1M-RED 101-TS1L-RED 101-TS1XL-RED 101-TS1XXL-RED T-shirt Red, Cobra Snake Logo, Medium T-shirt Red, Cobra Snake Logo, Large T-shirt Red, Cobra Snake Logo, X-Large T-shirt Red, Cobra Snake Logo, XX-Large Another Cobra Automotive favorite. A Grey T-Shirt with our checkered flag “wing” logo and Bill Neale line art of our “house” race car # 530. Silk screened on 100% Pre-shrunk cotton “Hanes Beefy-T” shirts. Cobra Automotive “Race to Win” T-Shirt 101-TS2-M 101-TS2-L 101-TS2-XL 101-TS2-XXL T-shirt Gray, Medium T-shirt Gray, Large T-shirt Gray, X-Large T-shirt Gray, XX-Large These Cobra Automotive Polo Shirts are 100% cotton with Cobra Automotive’s name and our Snake logo embroidered just above the pocket. The casual design and soft, breathable fabric make this a great shirt for any occasion. Cobra Automotive Polo shirt, short Sleeve with Pocket 101-POLOS-BL-L 101-POLOS-BL-XL Black, Cobra Snake Logo, Large Black, Cobra Snake Logo, X-Large 101-POLOS-R-L 101-POLOS-R-XL Red, Cobra Snake Logo, Large Red, Cobra Snake Logo, X-Large 101-POLOS-NB-L 101-POLOS-NB-XL Navy Blue, Cobra Snake Logo, Large Navy Blue, Cobra Snake Logo, X-Large 101-POLOS-W-L 101-POLOS-W-XL White, Cobra Snake Logo, Large White, Cobra Snake Logo, X-Large 101-POLOS-GR-L 101-POLOS-GR-XL Gray, Cobra Snake Logo, Large Gray, Cobra Snake Logo, X-Large sales: 203-284-3863 email: sales@cobraautomotive.com 76 www.cobraautomotive.com Rev051112 APPAREL This version of Cobra Automotive’s Polo Shirt is a 50/50 cotton/poly blend fabric with our checkered flag “wing” logo embroidered just above the pocket. Cobra Automotive Polo shirt, short Sleeve with Pocket 101-POLFLG-GR-L 101-POLFLG-GR-XL Gray, Checkered Flag Logo, Medium Gray, Checkered Flag Logo, Large Cobra Automotive “Sandwich Bill” Caps are 100% garment –washed cotton twill with sewn vent eyelets and selffabric backstrap with buckle adjustment. Embroidered with Cobra Automotive’s name and our Snake logo on the front. Cotton-twill sandwich bill hat with Snake Logo & Cobra Auto Name. 101-HTSNKN-BL 101-HTSNKN-NB 101-HTSNKN-EW Black Navy Blue Elmwood You can also get our Hats embroidered with Cobra Automotive’s classic Checkered Flag “Wing” Logo on the front. Cotton-twill Sandwich Bill hat with Checkered Flag Logo 101-HTCFG-BL 101-HTCFG-NB 101-HTCFG-EW sales: 203-284-3863 Black Navy Blue Elmwood email: sales@cobraautomotive.com 77 www.cobraautomotive.com Rev051112 APPAREL Our long sleeve Denim Shirts are made of pre-washed 100% cotton and feature an oversized cut for a comfortable fit. Available in light blue or dark blue they are embroidered with Cobra Automotive’s classic Checkered Flag “Wing” Logo just above the pocket. Denim Long sleeve Dress Shirt, Light Blue 101-DENS-LB-M 101-DENS-LB-L 101-DENS-LB-XL Medium Large X-Large Denim Long sleeve Dress Shirt, Dark Blue 101-DENS-DB-M 101-DENS-DB-L 101-DENS-DB-XL Medium Large X-Large For something more formal we offer our long sleeve Performance Twill Dress Shirts. Made of 100% combed cotton twill treated with a Du-Pont Teflon finish that prevents wrinkles and repels stains. Machine washable they are embroidered with Cobra Automotive’s classic Checkered Flag “Wing” Logo just above the pocket. Dress Shirt, Performance Twill, long sleeve, Black 101-PTWDS-B-L 101-PTWDS-B-XL Large X-Large Cobra Automotive’s Three Season Jacket is made with a 100% Nylon shell, a full polyester fleece lining and quilted sleeve lining for outstanding protection and comfort from autumn through spring. Features include a drawcord with toggles at the waist and adjustable elastic cuffs with Velcro tabs. They are embroidered with Cobra Automotive’s classic Checkered Flag “Wing” Logo on the front. Three Season Jacket with Checkered Flag Logo 101-JKT-BL-L 101-JKT-BL-XL 101-JKT-NB-L 101-JKT-NB-XL 101-JKT-KH-L 101-JKT-KH-XL sales: 203-284-3863 Large Black X-Large Black Large Navy Blue X-Large Navy Blue Large Khaki X-Large Khaki email: sales@cobraautomotive.com 78 www.cobraautomotive.com Rev051112 sales: 203-284-3863 email: sales@cobraautomotive.com 79 www.cobraautomotive.com Rev051112 POLICIES Cobra Automotive Company Policies and Order Information and must be unused and unaltered. Please check all parts for test fit prior to assembly. All return shipping charges are the responsibility of the customer. A 15% restocking charge will be assessed unless Cobra Automotive has shipped the incorrect part or it is a manufacturing defect. Please insure your return for it’s proper value to protect yourself against loss or damage. All returns must be accompanied with a copy of the original sales invoice. The following items may not be returned: special orders, electrical parts of any kind, used parts of any kind, any new parts that have been installed or attempted to be installed or not in their original box or wrapper or any parts that have been altered in any way. Literature, clothing and videotapes may not be returned for any reason. Our Commitment to you: Our knowledgeable staff is committed to giving you the best service possible. If you need assistance or have a question please feel free to call us at (203) 284-3863 or e-mail us at sales@ cobraautomotive.com. Our business hours are Monday-Friday, 8:30 AM -5:00 PM EST. Your business is extremely important to us, thank you for giving us the opportunity to serve you. General Policies: We have made every effort to have accurate photographs and information throughout this catalog and current prices on our price list, however specifications and prices are subject to change without notice. Any order placed is subject to these changes. We accept Visa, MasterCard, Discover and American Express as well as a bank money order, wire transfer or cashiers check. Personal checks must clear prior to shipment, and include a valid driver’s license number on the check. Wire transfers must be in U.S. funds, and please add $30.00 for wire transfer charges. Shipping and Handling: Cobra Automotive ships via UPS ground. The customer may request another level of service (i.e.) UPS three day, two day or overnight. We require a signature on all UPS shipments unless otherwise specified. US Postal Service or Federal Express can be used on special request. US Postal Service available to the lower 48 states only, no insurance is available for shipments outside the US or to Alaska and Hawaii. Oversized items need to be shipped common carrier. We ship these items freight prepaid, the most economical way possible which means either ground or ocean. If you need them quickly please let us know, we can ship them air freight. All shipping costs are billed to the customer. Handling charges will include packaging and crating as necessary depending on the items to be shipped. We reserve the right to charge a handling fee, subject to review, for orders shipping on a customer’s freight account. Foreign shipments will need to provide the name of the customs broker if necessary. All shipments should be inspected immediately upon arrival for damage(s) or shortages. Any damage(s) or shortages should be immediately reported to the carrier as they are responsible for any damage during shipment. All claims must be made within 30 days. Shipping and handling estimates are available upon request but they will only be approximations. Ordering Information: Orders may be placed by telephone, mail or fax. You may be required to fill out a credit card approval form which can be e-mailed or faxed to you. This is to give us authorization to charge your card for your order. When placing a fax or mail order you must use our order form and it must be completely filled out. Forms that are not filled out completely may result in your order being delayed. The price of the catalog will be credited on your first order over fifty dollars. Canadian and Foreign Orders: These orders may be placed as above, however in addition the customer will be required to fill out a credit card approval form, which we may fax or e-mail to you. This is merely a formality authorizing Cobra Automotive to charge the credit card for the order. All customs, duty and taxes will be the responsibility of the customer. Please make payment in U.S. funds. Warranties and Liabilities: All manufacturer warranties’ are passed on to the customer. Products manufactured by Cobra Automotive are high performance or racing components and are warranted to be free of defects in material and workmanship only at the time of shipment. Cobra Automotive’s liability on all products is limited to replacement of defective parts only. Labor and any monetary expense regarding any part sold is the responsibility of the customer. Some of the components sold by Cobra Automotive are not DOT approved and are specifically intended for off road use only. The customer assumes all responsibility for compliance with any applicable federal, state or local laws or regulations. Due to the inherent danger in racing and high performance driving, the customer accepts all risk and responsibility concerning the installation and use of these products. Cobra Automotive accepts no responsibility and offers no guarantee expressed or implied regarding the safety of any of these products. Special Orders and Back Orders: Special orders, parts that Cobra Automotive orders specifically for a customer’s order or that Cobra Automotive must custom build or modify specific to a customer’s order will be charged a non-refundable fifty percent deposit and the balance due upon shipment. Back orders, we will try to notify you at the time of your order if any part is out of stock. If a part is out of stock and unavailable we will notify you as soon as possible as to that parts availability. Returns and Exchanges: To return or exchange a part you must call to obtain a return authorization number. Please have your invoice available when calling. Any part returned or exchanged is subject to inspection sales: 203-284-3863 email: sales@cobraautomotive.com x-i www.cobraautomotive.com Rev051112